The DOI matches its Crossref record; 183 of the 183 references it cites were found in a registry or an index.
Adsorption and desorption of hydrogen on metal–organic framework materials for storage applications: comparison with other nanoporous materials
Open accessAbstract
Hydrogen adsorption on porous materials is one of the possible methods proposed for hydrogen storage for transport applications. High pressure experimental studies of a wide range of porous materials have obtained maximum hydrogen excess capacities of 6-8 wt% at 77 K for metal-organic frameworks (MOFs) and porous carbon materials. Grand canonical Monte Carlo (GCMC) simulation studies indicate that higher hydrogen capacities are possible for covalent organic frameworks (COFs). Currently, the maximum isosteric enthalpies of adsorption of approximately 13 kJ mol(-1) at 77 K have been observed experimentally for metal-organic framework materials and this is higher than for COFs, where the maximum predicted from GCMC simulations is approximately 8 kJ mol(-1). Metal-organic framework materials have structural diversity and scope for modification of surface chemistry to enhance hydrogen surface interactions. The synthesis of MOFs with stronger H(2)-surface interactions to give similar hydrogen capacities at much higher temperatures than 77 K is required and eventually, materials that have these high capacities at ambient temperatures with rapid adsorption/desorption characteristics are necessary for applications as hydrogen storage materials for transport applications. The current methods envisaged for increasing adsorption at higher temperatures involve modification of the surface chemistry, in particular, the inclusion of open metal centres to increase hydrogen surface site interactions, and utilisation of the framework flexibility are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Functional Porous Coordination Polymers
Kitagawa, S., Kitaura, R., & Noro, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300610 · Cited by 11,071
Reticular synthesis and the design of new materials
Yaghi, O. M., O'Keeffe, M., Ockwig, N. W., Chae, H. K., Eddaoudi, M., & Kim, J. (2003) · Nature · doi:10.1038/nature01650 · Cited by 9,101
Hydrogen-storage materials for mobile applications
Schlapbach, L., & Züttel, A. (2001) · Nature · doi:10.1038/35104634 · Cited by 8,865
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Exceptional chemical and thermal stability of zeolitic imidazolate frameworks
Park, K. S., Ni, Z., Côté, A. P., Choi, J. Y., Huang, R., Uribe-Romo, F. J., Chae, H. K., O’Keeffe, M., & Yaghi, O. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602439103 · Cited by 7,563
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Designed Synthesis of 3D Covalent Organic Frameworks
El-Kaderi, H. M., Hunt, J. R., Mendoza-Cortés, J. L., Côté, A. P., Taylor, R. E., O'Keeffe, M., & Yaghi, O. M. (2007) · Science · doi:10.1126/science.1139915 · Cited by 2,575
Cited by
Energy storage applications of activated carbons: supercapacitors and hydrogen storage
Sevilla, M., & Mokaya, R. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43525c · Cited by 1,614
Development and Evaluation of Porous Materials for Carbon Dioxide Separation and Capture
Bae, Y., & Snurr, R. Q. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101891 · Cited by 1,208
Microwave assisted exfoliation and reduction of graphite oxide for ultracapacitors
Zhu, Y., Murali, S., Stoller, M. D., Velamakanni, A., Piner, R. D., & Ruoff, R. S. (2010) · Carbon · doi:10.1016/j.carbon.2010.02.001 · Cited by 869
Graphene-based materials: Synthesis and gas sorption, storage and separation
Gadipelli, S., & Guo, Z. X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.10.004 · Cited by 734
Hydrogen storage: beyond conventional methods
Dalebrook, A. F., Gan, W., Grasemann, M., Moret, S., & Laurenczy, G. (2013) · Chemical Communications · doi:10.1039/c3cc43836h · Cited by 503
Metadata
- Authors
- Thomas, K. M.
- Venue
- Dalton Transactions
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2009
- Issue
- 9
- Pages
- 1487
- ISSN
- 1477-9226 (ISSN-L)
- 1477-9234
- OpenAlex
- W2154198958
- Cited by
- 305
- References
- 183
- FWCI
- 28.97
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption and desorption of hydrogen on metal–organic framework materials for storage applications: comparison with other nanoporous materials. https://app.cochat.ai/papers/10.1039/b815583f
- The paper
- Thomas, K. M. (2009). Adsorption and desorption of hydrogen on metal–organic framework materials for storage applications: comparison with other nanoporous materials. Dalton Transactions. https://doi.org/10.1039/b815583f
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
