The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Nanostructured Bulk Silicon as an Effective Thermoelectric Material
Open accessAbstract
Thermoelectric power sources have consistently demonstrated their extraordinary reliability and longevity for deep space missions and small unattended terrestrial systems. However, more efficient bulk materials and practical devices are required to improve existing technology and expand into large‐scale waste heat recovery applications. Research has long focused on complex compounds that best combine the electrical properties of degenerate semiconductors with the low thermal conductivity of glassy materials. Recently it has been found that nanostructuring is an effective method to decouple electrical and thermal transport parameters. Dramatic reductions in the lattice thermal conductivity are achieved by nanostructuring bulk silicon with limited degradation in its electron mobility, leading to an unprecedented increase by a factor of 3.5 in its performance over that of the parent single‐crystal material. This makes nanostructured bulk (nano‐bulk) Si an effective high temperature thermoelectric material that performs at about 70% the level of state‐of‐the‐art Si 0.8 Ge 0.2 but without the need for expensive and rare Ge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
Thin-film thermoelectric devices with high room-temperature figures of merit
Venkatasubramanian, R., Siivola, E., Colpitts, T., & O'Quinn, B. (2001) · Nature · doi:10.1038/35098012 · Cited by 5,205
Enhanced thermoelectric performance of rough silicon nanowires
Hochbaum, A. I., Chen, R., Delgado, R. D., Liang, W., Garnett, E. C., Najarian, M., Majumdar, A., & Yang, P. (2008) · Nature · doi:10.1038/nature06381 · Cited by 4,109
New Directions for Low‐Dimensional Thermoelectric Materials
Dresselhaus, M. S., Chen, G., Tang, M. Y., Yang, R. G., Lee, H., Wang, D. Z., Ren, Z. F., Fleurial, J. ‐., & Gogna, P. (2007) · Advanced Materials · doi:10.1002/adma.200600527 · Cited by 4,033
Self-citationCubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Silicon nanowires as efficient thermoelectric materials
Boukai, A. I., Bunimovich, Y., Tahir-Kheli, J., Yu, J.-K., Goddard III, W. A., & Heath, J. R. (2008) · Nature · doi:10.1038/nature06458 · Cited by 2,729
Quantum Dot Superlattice Thermoelectric Materials and Devices
Harman, T. C., Taylor, P. J., Walsh, M. P., & LaForge, B. E. (2002) · Science · doi:10.1126/science.1072886 · Cited by 2,495
Materials for thermoelectric energy conversion
Wood, C. (1988) · Reports on Progress in Physics · doi:10.1088/0034-4885/51/4/001 · Cited by 1,121
Enhanced Thermoelectric Figure-of-Merit in Nanostructured p-type Silicon Germanium Bulk Alloys
Joshi, G., Lee, H., Lan, Y., Wang, X., Zhu, G., Wang, D., Gould, R. W., Cuff, D. C., Tang, M. Y., Dresselhaus, M. S., et al. (2008) · Nano Letters · doi:10.1021/nl8026795 · Cited by 1,119
Self-citation
Cited by
Rationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Phonon engineering through crystal chemistry
Toberer, E. S., Zevalkink, A., & Snyder, G. J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11754h · Cited by 945
Enhancement of Thermoelectric Figure‐of‐Merit by a Bulk Nanostructuring Approach
Lan, Y., Minnich, A. J., Chen, G., & Ren, Z. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901512 · Cited by 903
Self-citationMao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Self-citationMaterial and manufacturing cost considerations for thermoelectrics
LeBlanc, S., Yee, S. K., Scullin, M. L., Dames, C., & Goodson, K. E. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.030 · Cited by 503
Wang, Z., Alaniz, J. E., Jang, W., Garay, J. E., & Dames, C. (2011) · Nano Letters · doi:10.1021/nl1045395 · Cited by 462
Eco‐Friendly SnTe Thermoelectric Materials: Progress and Future Challenges
Moshwan, R., Yang, L., Zou, J., & Chen, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703278 · Cited by 424
Enhancement of the thermoelectric properties in nanoscale and nanostructured materials
Szczech, J. R., Higgins, J. M., & Jin, S. (2011) · J. Mater. Chem. · doi:10.1039/c0jm02755c · Cited by 405
A review on nanostructures of high-temperature thermoelectric materials for waste heat recovery
Fitriani, Ovik, R., Long, B. D., Barma, M. C., Riaz, M., Sabri, M. F. M., Said, S. M., & Saidur, R. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.035 · Cited by 385
Thermoelectricity for IoT – A review
Haras, M., & Skotnicki, T. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.10.013 · Cited by 368
Girard, S. N., He, J., Zhou, X., Shoemaker, D., Jaworski, C. M., Uher, C., Dravid, V. P., Heremans, J. P., & Kanatzidis, M. G. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206380h · Cited by 349
Strategies for engineering phonon transport in thermoelectrics
Kim, W. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01670c · Cited by 348
Advances in Thermal Conductivity
Toberer, E. S., Baranowski, L. L., & Dames, C. (2012) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070511-155040 · Cited by 334
Multilayered Carbon Nanotube/Polymer Composite Based Thermoelectric Fabrics
Hewitt, C. A., Kaiser, A. B., Roth, S., Craps, M., Czerw, R., & Carroll, D. L. (2012) · Nano Letters · doi:10.1021/nl203806q · Cited by 321
Hanus, R., Agne, M. T., Rettie, A. J. E., Chen, Z., Tan, G., Chung, D. Y., Kanatzidis, M. G., Pei, Y., Voorhees, P. W., & Snyder, G. J. (2019) · Advanced Materials · doi:10.1002/adma.201900108 · Cited by 311
Mean free path spectra as a tool to understand thermal conductivity in bulk and nanostructures
Yang, F., & Dames, C. (2013) · Physical Review B · doi:10.1103/physrevb.87.035437 · Cited by 283
Low thermal conductivity and triaxial phononic anisotropy of SnSe
Carrete, J., Mingo, N., & Curtarolo, S. (2014) · Applied Physics Letters · doi:10.1063/1.4895770 · Cited by 266
Dong, H., Wen, B., & Melnik, R. (2014) · Scientific Reports · doi:10.1038/srep07037 · Cited by 228
Ultralow Thermal Conductivity in Polycrystalline CdSe Thin Films With Controlled Grain Size
Feser, J. P., Chan, E. M., Majumdar, A., Segalman, R. A., & Urban, J. J. (2013) · Nano Letters · doi:10.1021/nl400531f · Cited by 83
Metadata
- Authors
- Bux, S. K., Blair, R. G., Gogna, P. K., Lee, H., Chen, G., Dresselhaus, M. S., Kaner, R. B., & Fleurial, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2009-08-03
- Volume
- 19
- Issue
- 15
- Pages
- 2445-2452
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2087572106
- Cited by
- 519
- References
- 24
- FWCI
- 12.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.