The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Nanostructured Bulk Silicon as an Effective Thermoelectric Material
Open accessAbstract
Thermoelectric power sources have consistently demonstrated their extraordinary reliability and longevity for deep space missions and small unattended terrestrial systems. However, more efficient bulk materials and practical devices are required to improve existing technology and expand into large‐scale waste heat recovery applications. Research has long focused on complex compounds that best combine the electrical properties of degenerate semiconductors with the low thermal conductivity of glassy materials. Recently it has been found that nanostructuring is an effective method to decouple electrical and thermal transport parameters. Dramatic reductions in the lattice thermal conductivity are achieved by nanostructuring bulk silicon with limited degradation in its electron mobility, leading to an unprecedented increase by a factor of 3.5 in its performance over that of the parent single‐crystal material. This makes nanostructured bulk (nano‐bulk) Si an effective high temperature thermoelectric material that performs at about 70% the level of state‐of‐the‐art Si 0.8 Ge 0.2 but without the need for expensive and rare Ge.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
Thin-film thermoelectric devices with high room-temperature figures of merit
Venkatasubramanian, R., Siivola, E., Colpitts, T., & O'Quinn, B. (2001) · Nature · doi:10.1038/35098012 · Cited by 5,205
Enhanced thermoelectric performance of rough silicon nanowires
Hochbaum, A. I., Chen, R., Delgado, R. D., Liang, W., Garnett, E. C., Najarian, M., Majumdar, A., & Yang, P. (2008) · Nature · doi:10.1038/nature06381 · Cited by 4,109
New Directions for Low‐Dimensional Thermoelectric Materials
Dresselhaus, M. S., Chen, G., Tang, M. Y., Yang, R. G., Lee, H., Wang, D. Z., Ren, Z. F., Fleurial, J. ‐., & Gogna, P. (2007) · Advanced Materials · doi:10.1002/adma.200600527 · Cited by 4,033
Self-citationCubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Silicon nanowires as efficient thermoelectric materials
Boukai, A. I., Bunimovich, Y., Tahir-Kheli, J., Yu, J.-K., Goddard III, W. A., & Heath, J. R. (2008) · Nature · doi:10.1038/nature06458 · Cited by 2,729
Quantum Dot Superlattice Thermoelectric Materials and Devices
Harman, T. C., Taylor, P. J., Walsh, M. P., & LaForge, B. E. (2002) · Science · doi:10.1126/science.1072886 · Cited by 2,495
Materials for thermoelectric energy conversion
Wood, C. (1988) · Reports on Progress in Physics · doi:10.1088/0034-4885/51/4/001 · Cited by 1,121
Enhanced Thermoelectric Figure-of-Merit in Nanostructured p-type Silicon Germanium Bulk Alloys
Joshi, G., Lee, H., Lan, Y., Wang, X., Zhu, G., Wang, D., Gould, R. W., Cuff, D. C., Tang, M. Y., Dresselhaus, M. S., et al. (2008) · Nano Letters · doi:10.1021/nl8026795 · Cited by 1,119
Self-citationEnhanced thermoelectric figure of merit in nanostructured n-type silicon germanium bulk alloy
Wang, X. W., Lee, H., Lan, Y. C., Zhu, G. H., Joshi, G., Wang, D. Z., Yang, J., Muto, A. J., Tang, M. Y., Klatsky, J., et al. (2008) · Applied Physics Letters · doi:10.1063/1.3027060 · Cited by 755
Self-citationThermal and Electrical Properties of Heavily Doped Ge-Si Alloys up to 1300°K
Dismukes, J. P., Ekstrom, L., Steigmeier, E. F., Kudman, I., & Beers, D. S. (1964) · Journal of Applied Physics · doi:10.1063/1.1713126 · Cited by 595
Thermal Conductivity of Silicon from 300 to 1400°K
Shanks, H. R., Maycock, P. D., Sidles, P. H., & Danielson, G. C. (1963) · Physical Review · doi:10.1103/physrev.130.1743 · Cited by 563
Ma, Y., Hao, Q., Poudel, B., Lan, Y., Yu, B., Wang, D., Chen, G., & Ren, Z. (2008) · Nano Letters · doi:10.1021/nl8009928 · Cited by 556
Self-citationHenry, A. S., & Chen, G. (2008) · Journal of Computational and Theoretical Nanoscience · doi:10.1166/jctn.2008.2454 · Cited by 391
Self-citationThe Thermoelectric Figure of Merit and its Relation to Thermoelectric Generators†
CHASMAR, R. P., & STRATTON, R. (1959) · Journal of Electronics and Control · doi:10.1080/00207215908937186 · Cited by 391
Thermal conductivity modeling of periodic two-dimensional nanocomposites
Yang, R., & Chen, G. (2004) · Physical Review B · doi:10.1103/physrevb.69.195316 · Cited by 338
Self-citationVining, C. B. (1991) · Journal of Applied Physics · doi:10.1063/1.347717 · Cited by 323
The Impact of Nanostructuring on the Thermal Conductivity of Thermoelectric CoSb3
Toprak, M. S., Stiewe, C., Platzek, D., Williams, S., Bertini, L., Müller, E., Gatti, C., Zhang, Y., Rowe, M., & Muhammed, M. (2004) · Advanced Functional Materials · doi:10.1002/adfm.200400109 · Cited by 307
Thermoelectricity and thermoelectric power generation
Rosi, F. D. (1968) · Solid-State Electronics · doi:10.1016/0038-1101(68)90104-4 · Cited by 259
Boundary scattering of phonons in solid solutions
Goldsmid, H. J., & Penn, A. W. (1968) · Physics Letters A · doi:10.1016/0375-9601(68)90898-0 · Cited by 212
Temperature of the milling balls in shaker and planetary mills
Takács, L., & McHenry, J. S. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0312-4 · Cited by 164
Thermal conductivity of thermoelectric Si0.8-Ge0.2 alloys
White, D. P., & Klemens, P. G. (1992) · Journal of Applied Physics · doi:10.1063/1.350806 · Cited by 46
Rowe, D. M., & Bhandari, C. M. (1980) · Applied Energy · doi:10.1016/0306-2619(80)90008-2 · Cited by 39
Cited by
Rationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Phonon engineering through crystal chemistry
Toberer, E. S., Zevalkink, A., & Snyder, G. J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11754h · Cited by 945
Enhancement of Thermoelectric Figure‐of‐Merit by a Bulk Nanostructuring Approach
Lan, Y., Minnich, A. J., Chen, G., & Ren, Z. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901512 · Cited by 903
Self-citationMao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Self-citationMaterial and manufacturing cost considerations for thermoelectrics
LeBlanc, S., Yee, S. K., Scullin, M. L., Dames, C., & Goodson, K. E. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.030 · Cited by 503
Metadata
- Authors
- Bux, S. K., Blair, R. G., Gogna, P. K., Lee, H., Chen, G., Dresselhaus, M. S., Kaner, R. B., & Fleurial, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2009-08-03
- Volume
- 19
- Issue
- 15
- Pages
- 2445-2452
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2087572106
- Cited by
- 519
- References
- 24
- FWCI
- 12.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.