The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
High‐Performance Alkaline Polymer Electrolyte for Fuel Cell Applications
Abstract
Although the proton exchange membrane fuel cell (PEMFC) has made great progress in recent decades, its commercialization has been hindered by a number of factors, among which is the total dependence on Pt‐based catalysts. Alkaline polymer electrolyte fuel cells (APEFCs) have been increasingly recognized as a solution to overcome the dependence on noble metal catalysts. In principle, APEFCs combine the advantages of and alkaline fuel cell (AFC) and a PEMFC: there is no need for noble metal catalysts and they are free of carbonate precipitates that would break the waterproofing in the AFC cathode. However, the performance of most alkaline polyelectrolytes can still not fulfill the requirement of fuel cell operations. In the present work, detailed information about the synthesis and physicochemical properties of the quaternary ammonia polysulfone (QAPS), a high‐performance alkaline polymer electrolyte that has been successfully applied in the authors' previous work to demonstrate an APEFC completely free from noble metal catalysts (S. Lu, J. Pan, A. Huang, L. Zhuang, J. Lu, Proc. Natl. Acad. Sci. USA 2008, 105, 20611), is reported. Monitored by NMR analysis, the synthetic process of QAPS is seen to be simple and efficient. The chemical and thermal stability, as well as the mechanical strength of the synthetic QAPS membrane, are outstanding in comparison to commercial anion‐exchange membranes. The ionic conductivity of QAPS at room temperature is measured to be on the order of 10−2 S cm−1. Such good mechanical and conducting performances can be attributed to the superior microstructure of the polyelectrolyte, which features interconnected ionic channels in tens of nanometers diameter, as revealed by HRTEM observations. The electrochemical behavior at the Pt/QAPS interface reveals the strong alkaline nature of this polyelectrolyte, and the preliminary fuel cell test verifies the feasibility of QAPS for fuel cell applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R., Meyers, J., Pivovar, B., Kim, Y. S., Mukundan, R., Garland, N., Myers, D., Wilson, M., Garzon, F., Wood, D., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,402
A class of non-precious metal composite catalysts for fuel cells
Bashyam, R., & Zelenay, P. (2006) · Nature · doi:10.1038/nature05118 · Cited by 2,083
Fundamental Models for Fuel Cell Engineering
Wang, C.-Y. (2004) · Chemical Reviews · doi:10.1021/cr020718s · Cited by 1,266
Prospects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells
Varcoe, J. R., & Slade, R. C. T. (2005) · Fuel Cells · doi:10.1002/fuce.200400045 · Cited by 1,260
Cleaning the air and improving health with hydrogen fuel-cell vehicles
Jacobson, M. Z., Colella, W. G., & Golden, D. M. (2005) · Science · doi:10.1126/science.1109157 · Cited by 1,023
Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts
Lu, S., Pan, J., Huang, A., Zhuang, L., & Lu, J. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0810041106 · Cited by 748
Self-citationAir Pollution and Climate-Forcing Impacts of a Global Hydrogen Economy
Schultz, M. G., Diehl, T., Brasseur, G. P., & Zittel, W. (2003) · Science · doi:10.1126/science.1089527 · Cited by 392
Varcoe, J. R., Slade, R. C. T., Lam How Yee, E., Poynton, S. D., Driscoll, D. J., & Apperley, D. C. (2007) · Chemistry of Materials · doi:10.1021/cm062407u · Cited by 383
Alkaline direct alcohol fuel cells using an anion exchange membrane
Matsuoka, K., Iriyama, Y., Abe, T., Matsuoka, M., & Ogumi, Z. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.02.020 · Cited by 377
Research works printed but not linked: 15
- 10.1002/fuce.200400037 · doi:10.1002/fuce.200400037
- 10.1002/fuce.200332104 · doi:10.1002/fuce.200332104
- 10.1002/fuce.200332109 · doi:10.1002/fuce.200332109
- 10.1016/j.jpowsour.2008.10.132 · doi:10.1016/j.jpowsour.2008.10.132
- 10.1021/cm062407u · DOI · Paper page
- 10.1021/jp076740c · doi:10.1021/jp076740c
- 10.1007/s10800-005-9017-7 · doi:10.1007/s10800-005-9017-7
- 10.1002/pi.1717 · DOI
- 10.1016/j.memsci.2009.04.012 · doi:10.1016/j.memsci.2009.04.012
- 10.1016/j.memsci.2008.06.020 · doi:10.1016/j.memsci.2008.06.020
- 10.1016/j.memsci.2008.03.017 · doi:10.1016/j.memsci.2008.03.017
- 10.1016/j.jpowsour.2006.06.065 · DOI
- 10.1016/j.memsci.2006.07.046 · DOI
- 10.1016/j.memsci.2006.02.024 · DOI
- 10.1039/b208627a · doi:10.1039/b208627a
Cited by
Anion-exchange membranes in electrochemical energy systems
Varcoe, J. R., Atanassov, P., Dekel, D. R., Herring, A. M., Hickner, M. A., Kohl, P. A., Kucernak, A. R., Mustain, W. E., Nijmeijer, K., Scott, K., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01303d · Cited by 2,051
Self-citationAnion exchange membranes for alkaline fuel cells: A review
Merle, G., Wessling, M., & Nijmeijer, K. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.04.043 · Cited by 1,695
Recent Development of Polymer Electrolyte Membranes for Fuel Cells
Zhang, H., & Shen, P. K. (2012) · Chemical Reviews · doi:10.1021/cr200035s · Cited by 1,361
Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells
Wang, J., Zhao, Y., Setzler, B. P., Rojas-Carbonell, S., Ben Yehuda, C., Amel, A., Page, M., Wang, L., Hu, K., Shi, L., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0372-8 · Cited by 1,012
Shin, D. W., Guiver, M. D., & Lee, Y. M. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00586 · Cited by 989
Carbon‐Based Metal‐Free ORR Electrocatalysts for Fuel Cells: Past, Present, and Future
Yang, L., Shui, J., Du, L., Shao, Y., Liu, J., Dai, L., & Hu, Z. (2019) · Advanced Materials · doi:10.1002/adma.201804799 · Cited by 977
Low cost hydrogen production by anion exchange membrane electrolysis: A review
Vincent, I., & Bessarabov, D. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.258 · Cited by 912
Alkaline Stability of Quaternary Ammonium Cations for Alkaline Fuel Cell Membranes and Ionic Liquids
Marino, M. G., & Kreuer, K. D. (2015) · ChemSusChem · doi:10.1002/cssc.201403022 · Cited by 807
Polymeric materials as anion-exchange membranes for alkaline fuel cells
Couture, G., Alaaeddine, A., Boschet, F., & Ameduri, B. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.04.004 · Cited by 685
On the Role of Metals in Nitrogen‐Doped Carbon Electrocatalysts for Oxygen Reduction
Masa, J., Xia, W., Muhler, M., & Schuhmann, W. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201500569 · Cited by 653
Alkaline polymer electrolyte membranes for fuel cell applications
Wang, Y.-J., Qiao, J., Baker, R., & Zhang, J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60053j · Cited by 599
Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies
Yang, Y., Peltier, C. R., Zeng, R., Schimmenti, R., Li, Q., Huang, X., Yan, Z., Potsi, G., Selhorst, R., Lu, X., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00331 · Cited by 544
Self-citationConstructing ionic highway in alkaline polymer electrolytes
Pan, J., Chen, C., Li, Y., Wang, L., Tan, L., Li, G., Tang, X., Xiao, L., Lu, J., & Zhuang, L. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43275k · Cited by 515
Self-citationRabiee, H., Ge, L., Zhang, X., Hu, S., Li, M., & Yuan, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03756g · Cited by 509
Designing anion exchange membranes for CO2 electrolysers
Salvatore, D. A., Gabardo, C. M., Reyes, A., O’Brien, C. P., Holdcroft, S., Pintauro, P., Bahar, B., Hickner, M., Bae, C., Sinton, D., et al. (2021) · Nature Energy · doi:10.1038/s41560-020-00761-x · Cited by 477
Anion exchange polyelectrolytes for membranes and ionomers
Chen, N., & Lee, Y. M. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101345 · Cited by 445
Wang, J., Li, S., & Zhang, S. (2010) · Macromolecules · doi:10.1021/ma100260a · Cited by 442
An Efficient Direct Ammonia Fuel Cell for Affordable Carbon-Neutral Transportation
Zhao, Y., Setzler, B. P., Wang, J., Nash, J., Wang, T., Xu, B., & Yan, Y. (2019) · Joule · doi:10.1016/j.joule.2019.07.005 · Cited by 436
Designing Advanced Alkaline Polymer Electrolytes for Fuel Cell Applications
Pan, J., Chen, C., Zhuang, L., & Lu, J. (2012) · Accounts of Chemical Research · doi:10.1021/ar200201x · Cited by 400
Self-citationSystematic Alkaline Stability Study of Polymer Backbones for Anion Exchange Membrane Applications
Mohanty, A. D., Tignor, S. E., Krause, J. A., Choe, Y.-K., & Bae, C. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02550 · Cited by 400
Robust Hydroxide Ion Conducting Poly(biphenyl alkylene)s for Alkaline Fuel Cell Membranes
Lee, W.-H., Kim, Y. S., & Bae, C. (2015) · ACS Macro Letters · doi:10.1021/acsmacrolett.5b00375 · Cited by 376
Prospects for alkaline zero gap water electrolysers for hydrogen production
Pletcher, D., & Li, X. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.08.080 · Cited by 340
Metal-Cation-Based Anion Exchange Membranes
Zha, Y., Disabb-Miller, M. L., Johnson, Z. D., Hickner, M. A., & Tew, G. N. (2012) · Journal of the American Chemical Society · doi:10.1021/ja211365r · Cited by 340
Electrochemical CO2 reduction in membrane-electrode assemblies
Ge, L., Rabiee, H., Li, M., Subramanian, S., Zheng, Y., Lee, J. H., Burdyny, T., & Wang, H. (2022) · Chem · doi:10.1016/j.chempr.2021.12.002 · Cited by 336
Cheng, J., He, G., & Zhang, F. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.04.040 · Cited by 316
Cross-Linked Alkaline Ionic Liquid-Based Polymer Electrolytes for Alkaline Fuel Cell Applications
Lin, B., Qiu, L., Lu, J., & Yan, F. (2010) · Chemistry of Materials · doi:10.1021/cm102957g · Cited by 314
Self-citationFirst implementation of alkaline polymer electrolyte water electrolysis working only with pure water
Xiao, L., Zhang, S., Pan, J., Yang, C., He, M., Zhuang, L., & Lu, J. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22146b · Cited by 313
Self-citationAlkaline Stable C2-Substituted Imidazolium-Based Anion-Exchange Membranes
Lin, B., Dong, H., Li, Y., Si, Z., Gu, F., & Yan, F. (2013) · Chemistry of Materials · doi:10.1021/cm400468u · Cited by 307
Self-citationImidazolium functionalized polysulfone anion exchange membrane for fuel cell application
Zhang, F., Zhang, H., & Qu, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10656b · Cited by 302
Dang, H.-S., Weiber, E. A., & Jannasch, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00350d · Cited by 293
Maurya, S., Noh, S., Matanovic, I., Park, E. J., Narvaez Villarrubia, C., Martinez, U., Han, J., Bae, C., & Kim, Y. S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02192a · Cited by 268
Lin, B., Qiu, L., Qiu, B., Peng, Y., & Yan, F. (2011) · Macromolecules · doi:10.1021/ma202159d · Cited by 262
Direct oxidation alkaline fuelcells: from materials to systems
Yu, E. H., Wang, X., Krewer, U., Li, L., & Scott, K. (2012) · Energy Environ. Sci. · doi:10.1039/c2ee02552c · Cited by 260
Yang, J., Li, Q., Jensen, J. O., Pan, C., Cleemann, L. N., Bjerrum, N. J., & He, R. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.038 · Cited by 123
Metadata
- Authors
- Pan, J., Lu, S., Li, Y., Huang, A., Zhuang, L., & Lu, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2010-01-13
- Volume
- 20
- Issue
- 2
- Pages
- 312-319
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2161109166
- Cited by
- 472
- References
- 51
- FWCI
- 24.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.