The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Estimating the Maximum Attainable Efficiency in Dye‐Sensitized Solar Cells
Abstract
For an ideal solar cell, a maximum solar‐to‐electrical power conversion efficiency of just over 30% is achievable by harvesting UV to near IR photons up to 1.1 eV. Dye‐sensitized solar cells (DSCs) are, however, not ideal. Here, the electrical and optical losses in the dye‐sensitized system are reviewed, and the main losses in potential from the conversion of an absorbed photon at the optical bandgap of the sensitizer to the open‐circuit voltage generated by the solar cell are specifically highlighted. In the first instance, the maximum power conversion efficiency attainable as a function of optical bandgap of the sensitizer and the “loss‐in‐potential” from the optical bandgap to the open‐circuit voltage is estimated. For the best performing DSCs with current technology, the loss‐in‐potential is ∼0.75 eV, which leads to a maximum power‐conversion efficiency of 13.4% with an optical bandgap of 1.48 eV (840 nm absorption onset). Means by which the loss‐in‐potential could be reduced to 0.4 eV are discussed; a maximum efficiency of 20.25% with an optical bandgap of 1.31 eV (940 nm) is possible if this is achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Grätzel, M. (2001) · Nature · doi:10.1038/35104607 · Cited by 12,687
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Nazeeruddin, M. K., Kay, A., Rodicio, I., Humphry-Baker, R., Mueller, E., Liska, P., Vlachopoulos, N., & Graetzel, M. (1993) · Journal of the American Chemical Society · doi:10.1021/ja00067a063 · Cited by 6,020
Hybrid Nanorod-Polymer Solar Cells
Huynh, W. U., Dittmer, J. J., & Alivisatos, A. P. (2002) · Science · doi:10.1126/science.1069156 · Cited by 5,014
Two-layer organic photovoltaic cell
Tang, C. W. (1986) · Applied Physics Letters · doi:10.1063/1.96937 · Cited by 5,002
Two-dimensional charge transport in self-organized, high-mobility conjugated polymers
Sirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P., et al. (1999) · Nature · doi:10.1038/44359 · Cited by 4,624
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Cited by
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Self-citationA mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Self-citationLead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Self-citationEperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Self-citationPerovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Self-citationDu, Y., Sheng, H., Astruc, D., & Zhu, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00726 · Cited by 1,495
The renaissance of dye-sensitized solar cells
Hardin, B. E., Snaith, H. J., & McGehee, M. D. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.22 · Cited by 1,304
Self-citationArylamine organic dyes for dye-sensitized solar cells
Liang, M., & Chen, J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35372a · Cited by 1,136
Dye-Sensitized Solar Cells: Fundamentals and Current Status
Sharma, K., Sharma, V., & Sharma, S. S. (2018) · Nanoscale Research Letters · doi:10.1186/s11671-018-2760-6 · Cited by 1,084
Quantum‐Dot‐Sensitized Solar Cells
Rühle, S., Shalom, M., & Zaban, A. (2010) · ChemPhysChem · doi:10.1002/cphc.201000069 · Cited by 924
Electron Transfer Dynamics in Dye-Sensitized Solar Cells
Listorti, A., O’Regan, B., & Durrant, J. R. (2011) · Chemistry of Materials · doi:10.1021/cm200651e · Cited by 654
Nanostructured photoelectrodes for dye-sensitized solar cells
Zhang, Q., & Cao, G. (2011) · Nano Today · doi:10.1016/j.nantod.2010.12.007 · Cited by 631
Formamidinium tin-based perovskite with low Eg for photovoltaic applications
Koh, T. M., Krishnamoorthy, T., Yantara, N., Shi, C., Leong, W. L., Boix, P. P., Grimsdale, A. C., Mhaisalkar, S. G., & Mathews, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00190k · Cited by 576
Sensitizer molecular structure-device efficiency relationship in dye sensitized solar cells
Clifford, J. N., Martínez-Ferrero, E., Viterisi, A., & Palomares, E. (2011) · Chem. Soc. Rev. · doi:10.1039/b920664g · Cited by 553
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Mariotti, N., Bonomo, M., Fagiolari, L., Barbero, N., Gerbaldi, C., Bella, F., & Barolo, C. (2020) · Green Chemistry · doi:10.1039/d0gc01148g · Cited by 499
New-generation integrated devices based on dye-sensitized and perovskite solar cells
Yun, S., Qin, Y., Uhl, A. R., Vlachopoulos, N., Yin, M., Li, D., Han, X., & Hagfeldt, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03165c · Cited by 478
Neutral Color Semitransparent Microstructured Perovskite Solar Cells
Eperon, G. E., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn4052309 · Cited by 470
Self-citationCurrent progress and future perspectives for organic/inorganic perovskite solar cells
Boix, P. P., Nonomura, K., Mathews, N., & Mhaisalkar, S. G. (2014) · Materials Today · doi:10.1016/j.mattod.2013.12.002 · Cited by 426
Solar Electricity and Solar Fuels: Status and Perspectives in the Context of the Energy Transition
Armaroli, N., & Balzani, V. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201503580 · Cited by 392
Electronic and optoelectronic materials and devices inspired by nature
Meredith, P., Bettinger, C. J., Irimia-Vladu, M., Mostert, A. B., & Schwenn, P. E. (2013) · Reports on Progress in Physics · doi:10.1088/0034-4885/76/3/034501 · Cited by 372
Malinauskas, T., Tomkute-Luksiene, D., Sens, R., Daskeviciene, M., Send, R., Wonneberger, H., Jankauskas, V., Bruder, I., & Getautis, V. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5090385 · Cited by 368
13.6% Efficient Organic Dye-Sensitized Solar Cells by Minimizing Energy Losses of the Excited State
Zhang, L., Yang, X., Wang, W., Gurzadyan, G. G., Li, J., Li, X., An, J., Yu, Z., Wang, H., Cai, B., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00141 · Cited by 366
Liao, J.-Y., Lei, B.-X., Chen, H.-Y., Kuang, D.-B., & Su, C.-Y. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02766b · Cited by 363
Leijtens, T., Ding, I.-K., Giovenzana, T., Bloking, J. T., McGehee, M. D., & Sellinger, A. (2012) · ACS Nano · doi:10.1021/nn204296b · Cited by 333
Ji, J.-M., Zhou, H., & Kim, H. K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02281j · Cited by 326
Cosensitization in Dye-Sensitized Solar Cells
Cole, J. M., Pepe, G., Al Bahri, O. K., & Cooper, C. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00632 · Cited by 299
Computational Screening of Homovalent Lead Substitution in Organic–Inorganic Halide Perovskites
Filip, M. R., & Giustino, F. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11845 · Cited by 283
Zeng, K., Tong, Z., Ma, L., Zhu, W.-H., Wu, W., & Xie, Y. (2020) · Energy & Environmental Science · doi:10.1039/c9ee04200h · Cited by 266
Stability assessment of alternative platinum free counter electrodes for dye-sensitized solar cells
Yun, S., Lund, P. D., & Hinsch, A. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02446c · Cited by 260
Obraztsov, I., Kutner, W., & D'Souza, F. (2017) · Solar RRL · doi:10.1002/solr.201600002 · Cited by 61
Metadata
- Authors
- Snaith, H. J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2009-12-28
- Volume
- 20
- Issue
- 1
- Pages
- 13-19
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W1973118584
- Cited by
- 525
- References
- 29
- FWCI
- 14.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.