The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Surface‐Protected Etching of Mesoporous Oxide Shells for the Stabilization of Metal Nanocatalysts
Abstract
Nanoparticles of transition metals, particularly noble metals, are widely used in catalysis. However, enhancing their stability during catalytic reactions has been a challenge that has limited the full use of the benefits associated with their small size. In this Feature Article, a general “encapsulation and etching” strategy for the fabrication of nanocatalyst systems is introduced in which catalyst nanoparticles are protected within porous shells. The novelty of this approach lies in the use of chemical etching to assist the creation of mesopores in a protective oxide shell to promote efficient mass transfer to encapsulated metal nanoparticles. The etching process allows for the direct transformation of dense silica coatings into porous shells so that chemical species can reach the catalyst surface to participate in reactions while the shells act as physical barriers against aggregation of the catalyst particles. By using the surface‐protected etching process, both yolk–shell and core–satellite type nanoreactors are synthesized and their utilization in liquid‐ and gas‐phase catalysis is demonstrated. The thermal and chemical stability of the metallic cores during catalytic reactions is also investigated, and further work is carried out to enhance recyclability via the introduction of superparamagnetic components into the nanoreactor framework.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ordered porous materials for emerging applications
Davis, M. E. (2002) · Nature · doi:10.1038/nature00785 · Cited by 5,308
Narayanan, R., & El-Sayed, M. A. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp051066p · Cited by 1,298
Catalytic nanoarchitectures—The importance of nothing and the unimportance of periodicity
Rolison, D. R. (2003) · Science · doi:10.1126/science.1082332 · Cited by 1,037
Antolini, E., Salgado, J. R. C., & Gonzalez, E. R. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.006 · Cited by 503
Cited by
Core–shell nanoparticles: synthesis and applications in catalysis and electrocatalysis
Gawande, M. B., Goswami, A., Asefa, T., Guo, H., Biradar, A. V., Peng, D.-L., Zboril, R., & Varma, R. S. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00343a · Cited by 1,143
Encapsulated Metal Nanoparticles for Catalysis
Gao, C., Lyu, F., & Yin, Y. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00237 · Cited by 855
Self-citationChemical Design and Synthesis of Functionalized Probes for Imaging and Treating Tumor Hypoxia
Liu, J.-N., Bu, W., & Shi, J. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00525 · Cited by 838
Yolk/shell nanoparticles: new platforms for nanoreactors, drug delivery and lithium-ion batteries
Liu, J., Qiao, S. Z., Chen, J. S., (David) Lou, X. W., Xing, X., & (Max) Lu, G. Q. (2011) · Chemical Communications · doi:10.1039/c1cc13658e · Cited by 823
Nanostructured materials for applications in heterogeneous catalysis
Zaera, F. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35261c · Cited by 661
Self-citationOne-Pot Synthesis of Highly Stable CsPbBr3@SiO2 Core–Shell Nanoparticles
Zhong, Q., Cao, M., Hu, H., Yang, D., Chen, M., Li, P., Wu, L., & Zhang, Q. (2018) · ACS Nano · doi:10.1021/acsnano.8b04209 · Cited by 636
Self-citationLi, X., Zhang, F., & Zhao, D. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00163j · Cited by 615
Core–Shell Nanostructured Catalysts
Zhang, Q., Lee, I., Joo, J. B., Zaera, F., & Yin, Y. (2013) · Accounts of Chemical Research · doi:10.1021/ar300230s · Cited by 586
Self-citationRevisiting the Stöber Method: Inhomogeneity in Silica Shells
Wong, Y. J., Zhu, L., Teo, W. S., Tan, Y. W., Yang, Y., Wang, C., & Chen, H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203316q · Cited by 425
Zaera, F. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00905 · Cited by 425
Self-citationNanocatalysis: size- and shape-dependent chemisorption and catalytic reactivity
Roldan Cuenya, B., & Behafarid, F. (2015) · Surface Science Reports · doi:10.1016/j.surfrep.2015.01.001 · Cited by 388
Gomathi Devi, L., & Kavitha, R. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.016 · Cited by 359
Core–Shell Catalysts of Metal Nanoparticle Core and Metal–Organic Framework Shell
Hu, P., Morabito, J. V., & Tsung, C.-K. (2014) · ACS Catalysis · doi:10.1021/cs5012662 · Cited by 358
Zhang, Q., Lima, D. Q., Lee, I., Zaera, F., Chi, M., & Yin, Y. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101969 · Cited by 347
Self-citationZhang, X., Zhao, R., Wu, Q., Li, W., Shen, C., Ni, L., Yan, H., Diao, G., & Chen, M. (2017) · ACS Nano · doi:10.1021/acsnano.7b04078 · Cited by 337
Dong, Z., Feng, L., Hao, Y., Li, Q., Chen, M., Yang, Z., Zhao, H., & Liu, Z. (2020) · Chem · doi:10.1016/j.chempr.2020.02.020 · Cited by 331
Synthesis and Stabilization of Supported Metal Catalysts by Atomic Layer Deposition
Lu, J., Elam, J. W., & Stair, P. C. (2013) · Accounts of Chemical Research · doi:10.1021/ar300229c · Cited by 329
Fan, W., Shen, B., Bu, W., Chen, F., Zhao, K., Zhang, S., Zhou, L., Peng, W., Xiao, Q., Xing, H., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312225b · Cited by 328
Direct urea fuel cells: Challenges and opportunities
Sayed, E. T., Eisa, T., Mohamed, H. O., Abdelkareem, M. A., Allagui, A., Alawadhi, H., & Chae, K.-J. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.12.024 · Cited by 322
A Yolk@Shell Nanoarchitecture for Au/TiO2 Catalysts
Lee, I., Joo, J. B., Yin, Y., & Zaera, F. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201007660 · Cited by 320
Self-citationYolk/shell nanoparticles: classifications, synthesis, properties, and applications
Purbia, R., & Paria, S. (2015) · Nanoscale · doi:10.1039/c5nr04729c · Cited by 307
A Yolk–Shell Nanoreactor with a Basic Core and an Acidic Shell for Cascade Reactions
Yang, Y., Liu, X., Li, X., Zhao, J., Bai, S., Liu, J., & Yang, Q. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201204829 · Cited by 299
Tunable Synthesis of Hierarchical Mesoporous Silica Nanoparticles with Radial Wrinkle Structure
Moon, D.-S., & Lee, J.-K. (2012) · Langmuir · doi:10.1021/la302145j · Cited by 285
Hollow Mesoporous Aluminosilica Spheres with Perpendicular Pore Channels as Catalytic Nanoreactors
Fang, X., Liu, Z., Hsieh, M.-F., Chen, M., Liu, P., Chen, C., & Zheng, N. (2012) · ACS Nano · doi:10.1021/nn3011703 · Cited by 284
Xu, W., Qian, J., Hou, G., Wang, T., Wang, J., Wang, Y., Yang, L., Cui, X., & Suo, A. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202205013 · Cited by 267
Structural design of TiO2-based photocatalyst for H2 production and degradation applications
Gao, M., Zhu, L., Ong, W. L., Wang, J., & Ho, G. W. (2015) · Catalysis Science & Technology · doi:10.1039/c5cy00879d · Cited by 263
Metadata
- Authors
- Zhang, Q., Lee, I., Ge, J., Zaera, F., & Yin, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2010-07-14
- Volume
- 20
- Issue
- 14
- Pages
- 2201-2214
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2146391939
- Cited by
- 228
- References
- 4
- FWCI
- 11.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.