The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Effects of Thermal Annealing Upon the Morphology of Polymer–Fullerene Blends
Open accessAbstract
Grazing incidence X‐ray scattering (GIXS) is used to characterize the morphology of poly(3‐hexylthiophene) (P3HT)–phenyl‐C61‐butyric acid methyl ester (PCBM) thin film bulk heterojunction (BHJ) blends as a function of thermal annealing temperature, from room temperature to 220 °C. A custom‐built heating chamber for in situ GIXS studies allows for the morphological characterization of thin films at elevated temperatures. Films annealed with a thermal gradient allow for the rapid investigation of the morphology over a range of temperatures that corroborate the results of the in situ experiments. Using these techniques the following are observed: the melting points of each component; an increase in the P3HT coherence length with annealing below the P3HT melting temperature; the formation of well‐oriented P3HT crystallites with the (100) plane parallel to the substrate, when cooled from the melt; and the cold crystallization of PCBM associated with the PCBM glass transition temperature. The incorporation of these materials into BHJ blends affects the nature of these transitions as a function of blend ratio. These results provide a deeper understanding of the physics of how thermal annealing affects the morphology of polymer–fullerene BHJ blends and provides tools to manipulate the blend morphology in order to develop high‐performance organic solar cell devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetics of Phase Change. I General Theory
Avrami, M. (1939) · The Journal of Chemical Physics · doi:10.1063/1.1750380 · Cited by 11,399
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Two-dimensional charge transport in self-organized, high-mobility conjugated polymers
Sirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P., et al. (1999) · Nature · doi:10.1038/44359 · Cited by 4,624
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Kim, Y., Cook, S., Tuladhar, S. M., Choulis, S. A., Nelson, J., Durrant, J. R., Bradley, D. D. C., Giles, M., McCulloch, I., Ha, C.-S., et al. (2006) · Nature Materials · doi:10.1038/nmat1574 · Cited by 2,312
Young, R. J., & Lovell, P. A. (1992) · Springer eBooks · doi:10.1007/978-1-4615-3478-5 · Cited by 2,116
Effects of Postproduction Treatment on Plastic Solar Cells
Padinger, F., Rittberger, R. S., & Sariciftci, N. S. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200390011 · Cited by 2,018
Bao, Z., Dodabalapur, A., & Lovinger, A. J. (1996) · Applied Physics Letters · doi:10.1063/1.117834 · Cited by 1,681
Self-citationCampoy-Quiles, M., Ferenczi, T., Agostinelli, T., Etchegoin, P. G., Kim, Y., Anthopoulos, T. D., Stavrinou, P. N., Bradley, D. D. C., & Nelson, J. (2008) · Nature Materials · doi:10.1038/nmat2102 · Cited by 1,453
Morphology of polymer/fullerene bulk heterojunction solar cells
Hoppe, H., & Sariciftci, N. S. (2006) · J. Mater. Chem. · doi:10.1039/b510618b · Cited by 1,414
Li, G., Yao, Y., Yang, H., Shrotriya, V., Yang, G., & Yang, Y. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600624 · Cited by 1,147
Kline, R. J., McGehee, M. D., Kadnikova, E. N., Liu, J., Fréchet, J. M. J., & Toney, M. F. (2005) · Macromolecules · doi:10.1021/ma047415f · Cited by 1,072
Self-citationControlling the Field‐Effect Mobility of Regioregular Polythiophene by Changing the Molecular Weight
Kline, R. J., McGehee, M. D., Kadnikova, E. N., Liu, J., & Fréchet, J. M. J. (2003) · Advanced Materials · doi:10.1002/adma.200305275 · Cited by 956
Chang, J.-F., Sun, B., Breiby, D. W., Nielsen, M. M., Sölling, T. I., Giles, M., McCulloch, I., & Sirringhaus, H. (2004) · Chemistry of Materials · doi:10.1021/cm049617w · Cited by 944
Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells
Yao, Y., Hou, J., Xu, Z., Li, G., & Yang, Y. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701459 · Cited by 671
Toward High-Performance Polymer Solar Cells: The Importance of Morphology Control
Yang, X., & Loos, J. (2007) · Macromolecules · doi:10.1021/ma0618732 · Cited by 622
Yang, H., Shin, T. J., Yang, L., Cho, K., Ryu, C. Y., & Bao, Z. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400297 · Cited by 570
Self-citationSchultz, J. M. (1974) · Prentice Hall eBooks · Cited by 470
Zhang, R., Li, B., Iovu, M. C., Jeffries-EL, M., Sauvé, G., Cooper, J., Jia, S., Tristram-Nagle, S., Smilgies, D. M., Lambeth, D. N., et al. (2006) · Journal of the American Chemical Society · doi:10.1021/ja055192i · Cited by 448
Woo, C. H., Thompson, B. C., Kim, B. J., Toney, M. F., & Fréchet, J. M. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja806493n · Cited by 410
Self-citationSolution-Processed Organic Solar Cells
Brabec, C. J., & Durrant, J. R. (2008) · MRS Bulletin · doi:10.1557/mrs2008.138 · Cited by 395
Baker, J. L., Jimison, L. H., Mannsfeld, S., Volkman, S., Yin, S., Subramanian, V., Salleo, A., Alivisatos, A. P., & Toney, M. F. (2010) · Langmuir · doi:10.1021/la904840q · Cited by 352
Self-citationRispens, M. T., Meetsma, A., Rittberger, R., Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2003) · Chem. Commun. · doi:10.1039/b305988j · Cited by 350
Phase Diagram of P3HT/PCBM Blends and Its Implication for the Stability of Morphology
Zhao, J., Swinnen, A., Van Assche, G., Manca, J., Vanderzande, D., & Mele, B. V. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp804151a · Cited by 350
Wilkes, G. L. (1974) · The Chemical Engineering Journal · doi:10.1016/0300-9467(74)80029-8 · Cited by 293
Savenije, T. J., Kroeze, J. E., Yang, X., & Loos, J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400559 · Cited by 255
Nanoparticle concentration profile in polymer-based solar cells
Kiel, J. W., Kirby, B. J., Majkrzak, C. F., Maranville, B. B., & Mackay, M. E. (2010) · Soft Matter · doi:10.1039/b920979d · Cited by 174
Theory of Cold Crystallization of High Polymers
Wunderlich, B. (1958) · The Journal of Chemical Physics · doi:10.1063/1.1744729 · Cited by 154
Simulating X-ray diffraction of textured films
Breiby, D. W., Bunk, O., Andreasen, J. W., Lemke, H. T., & Nielsen, M. M. (2008) · Journal of Applied Crystallography · doi:10.1107/s0021889808001064 · Cited by 135
Wellen, R. M. R., & Rabello, M. S. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-3173-3 · Cited by 89
Mixed Solvents for Morphology Control of Organic Solar Cell Blend Films
Cook, S., Furube, A., & Katoh, R. (2008) · Japanese Journal of Applied Physics · doi:10.1143/jjap.47.1238 · Cited by 30
Cited by
Integrated Materials Design of Organic Semiconductors for Field-Effect Transistors
Mei, J., Diao, Y., Appleton, A. L., Fang, L., & Bao, Z. (2013) · Journal of the American Chemical Society · doi:10.1021/ja400881n · Cited by 1,443
Self-citationEfficiency Roll‐Off in Organic Light‐Emitting Diodes
Murawski, C., Leo, K., & Gather, M. C. (2013) · Advanced Materials · doi:10.1002/adma.201301603 · Cited by 1,153
Stability of organic solar cells: challenges and strategies
Cheng, P., & Zhan, X. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00593k · Cited by 1,046
Müller‐Buschbaum, P. (2014) · Advanced Materials · doi:10.1002/adma.201304187 · Cited by 730
Collins, B. A., Li, Z., Tumbleston, J. R., Gann, E., McNeill, C. R., & Ade, H. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200377 · Cited by 649
Metadata
- Authors
- Verploegen, E., Mondal, R., Bettinger, C. J., Sok, S., Toney, M. F., & Bao, Z.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2010-08-18
- Volume
- 20
- Issue
- 20
- Pages
- 3519-3529
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2043942465
- Cited by
- 595
- References
- 32
- FWCI
- 37.13
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.