The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Interface‐Engineered Amorphous TiO2‐Based Resistive Memory Devices
Abstract
Crossbar‐type bipolar resistive memory devices based on low‐temperature amorphous TiO 2 (a‐TiO 2) thin films are very promising devices for flexible nonvolatile memory applications. However, stable bipolar resistive switching from amorphous TiO 2 thin films has only been achieved for Al metal electrodes that can have severe problems like electromigration and breakdown in real applications and can be a limiting factor for novel applications like transparent electronics. Here, amorphous TiO 2‐based resistive random access memory devices are presented that universally work for any configuration of metal electrodes via engineering the top and bottom interface domains. Both by inserting an ultrathin metal layer in the top interface region and by incorporating a thin blocking layer in the bottom interface, more enhanced resistance switching and superior endurance performance can be realized. Using high‐resolution transmission electron microscopy, point energy dispersive spectroscopy, and energy‐filtering transmission electron microscopy, it is demonstrated that the stable bipolar resistive switching in metal/a‐TiO 2/metal RRAM devices is attributed to both interface domains: the top interface domain with mobile oxygen ions and the bottom interface domain for its protection against an electrical breakdown.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Memristive switching mechanism for metal/oxide/metal nanodevices
Yang, J. J., Pickett, M. D., Li, X., Ohlberg, D. A. A., Stewart, D. R., & Williams, R. S. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.160 · Cited by 2,987
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
Yang, Y. C., Pan, F., Liu, Q., Liu, M., & Zeng, F. (2009) · Nano Letters · doi:10.1021/nl900006g · Cited by 876
Cited by
Multifunctional wearable devices for diagnosis and therapy of movement disorders
Son, D., Lee, J., Qiao, S., Ghaffari, R., Kim, J., Lee, J. E., Song, C., Kim, S. J., Lee, D. J., Jun, S. W., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.38 · Cited by 1,462
Self-citationPan, F., Gao, S., Chen, C., Song, C., & Zeng, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.06.002 · Cited by 1,403
Towards the Development of Flexible Non‐Volatile Memories
Han, S., Zhou, Y., & Roy, V. A. L. (2013) · Advanced Materials · doi:10.1002/adma.201301361 · Cited by 555
Resistance random access memory
Chang, T.-C., Chang, K.-C., Tsai, T.-M., Chu, T.-J., & Sze, S. M. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.009 · Cited by 495
TiO2—a prototypical memristive material
Szot, K., Rogala, M., Speier, W., Klusek, Z., Besmehn, A., & Waser, R. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254001 · Cited by 297
Metadata
- Authors
- Jeong, H. Y., Lee, J. Y., & Choi, S.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2010-09-02
- Volume
- 20
- Issue
- 22
- Pages
- 3912-3917
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2043714491
- Cited by
- 185
- References
- 3
- FWCI
- 11.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Interface‐Engineered Amorphous TiO2‐Based Resistive Memory Devices. https://app.cochat.ai/papers/10.1002/adfm.201001254
- The paper
- Jeong, H. Y., Lee, J. Y., & Choi, S. (2010). Interface‐Engineered Amorphous TiO2‐Based Resistive Memory Devices. Advanced Functional Materials. https://doi.org/10.1002/adfm.201001254
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.