The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Gecko‐Inspired Controllable Adhesive Structures Applied to Micromanipulation
Abstract
Gecko‐inspired angled elastomer micropillars with flat or round tip endings are presented as compliant pick‐and‐place micromanipulators. The pillars are 35 μm in diameter, 90 μm tall, and angled at an inclination of 20°. By gently pressing the tip of a pillar to a part, the pillar adheres to it through intermolecular forces. Next, by retracting quickly, the part is picked from a given donor substrate. During transferring, the adhesion between the pillar and the part is high enough to withstand disturbances due to external forces or the weight of the part. During release of the part onto a receiver substrate, the contact area of the pillar to the part is drastically reduced by controlled vertical or shear displacement, which results in reduced adhesive forces. The maximum repeatable ratio of pick‐to‐release adhesive forces is measured as 39 to 1. It is found that a flat tip shape and shear displacement control provide a higher pick‐to‐release adhesion ratio than a round tip and vertical displacement control, respectively. A model of forces to serve as a framework for the operation of this micromanipulator is presented. Finally, demonstrations of pick‐and‐place manipulation of micrometer‐scale silicon microplatelets and a centimeter‐scale glass cover slip serve as proofs of the concept. The compliant polymer micropillars are safe for use with fragile parts, and, due to exploiting intermolecular forces, could be effective on most materials and in air, vacuum, and liquid environments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Evidence for self-cleaning in gecko setae
Hansen, W. R., & Autumn, K. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0408304102 · Cited by 601
Carbon nanotube-based synthetic gecko tapes
Ge, L., Sethi, S., Ci, L., Ajayan, P. M., & Dhinojwala, A. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0703505104 · Cited by 441
Cited by
Persano, L., Dagdeviren, C., Su, Y., Zhang, Y., Girardo, S., Pisignano, D., Huang, Y., & Rogers, J. A. (2013) · Nature Communications · doi:10.1038/ncomms2639 · Cited by 1,271
Self-citationYang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Transfer printing techniques for flexible and stretchable inorganic electronics
Linghu, C., Zhang, S., Wang, C., & Song, J. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0037-x · Cited by 357
Arzt, E., Quan, H., McMeeking, R. M., & Hensel, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100823 · Cited by 253
Metadata
- Authors
- Mengüç, Y., Yang, S. Y., Kim, S., Rogers, J. A., & Sitti, M.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2012-01-19
- Volume
- 22
- Issue
- 6
- Pages
- 1246-1254
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2167934487
- Cited by
- 180
- References
- 2
- FWCI
- 15.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Gecko‐Inspired Controllable Adhesive Structures Applied to Micromanipulation. https://app.cochat.ai/papers/10.1002/adfm.201101783
- The paper
- Mengüç, Y., Yang, S. Y., Kim, S., Rogers, J. A., & Sitti, M. (2012). Gecko‐Inspired Controllable Adhesive Structures Applied to Micromanipulation. Advanced Functional Materials. https://doi.org/10.1002/adfm.201101783
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.