Temperature‐Memory Effect of Copolyesterurethanes and their Application Potential in Minimally Invasive Medical Technologies
The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Minimally invasive surgery often requires devices that can change their geometry or shape when placed inside the body. Here, the potential of thermoplastic temperature‐memory polymers (TMP) for the design of intelligent devices, which can be programmed by the clinician to individually adapt their shifting geometry and their response temperature Tsw to the patient's needs, is explored. Poly(ω‐pentadecalactone) as hard segments and poly(ϵ‐caprolactone) segments acting as crystallizable controlling units for the temperature‐memory effect (TME) are chosen to form multiblock copolymers PDLCL. These components are selected according to their thermal properties and their good biocompatibility. Response temperatures obtained under stress‐free and constant strain recovery can be systematically adjusted by variation of the deformation temperature in a temperature range from 32 °C to 65 °C, which is the relevant temperature range for medical applications. The working principle of TMP based instruments for minimally invasive surgical procedures is successfully demonstrated using three temperature‐memory catheter concepts: individually programmable TM‐catheter, an in‐situ programmable TM‐catheter, and an intelligent drainage catheter for gastroenterology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Self-citationTunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
Yakacki, C. M., Shandas, R., Lanning, C., Rech, B., Eckstein, A., & Gall, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.030 · Cited by 618
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
Shape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Self-citationLaser-activated shape memory polymer intravascular thrombectomy device
Small IV, W., Wilson, T. S., Benett, W. J., Loge, J. M., & Maitland, D. J. (2005) · Optics Express · doi:10.1364/opex.13.008204 · Cited by 265
Mechanisms of the multi-shape memory effect and temperature memory effect in shape memory polymers
Sun, L., & Huang, W. M. (2010) · Soft Matter · doi:10.1039/c0sm00236d · Cited by 257
Evaluation of a degradable shape-memory polymer network as matrix for controlled drug release
Wischke, C., Neffe, A. T., Steuer, S., & Lendlein, A. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.05.027 · Cited by 248
Self-citationTemperature‐Memory Polymer Networks with Crystallizable Controlling Units
Kratz, K., Madbouly, S. A., Wagermaier, W., & Lendlein, A. (2011) · Advanced Materials · doi:10.1002/adma.201102225 · Cited by 150
Self-citationSmall, W., Buckley, P. R., Wilson, T. S., Benett, W. J., Hartman, J., Saloner, D., & Maitland, D. J. (2007) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2006.889771 · Cited by 124
Ortega, J. M., Small, W., Wilson, T. S., Benett, W. J., Loge, J. M., & Maitland, D. J. (2007) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2007.892927 · Cited by 72
483 SHAPE MEMORY POLYMER NEUROVASCULAR STENTS.
Baer, G., Wilson, T., Maitland, D., & Matthews, D. (2006) · Journal of Investigative Medicine · doi:10.2310/6650.2005.x0004.482 · Cited by 17
Cited by
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
Metadata
- Authors
- Kratz, K., Voigt, U., & Lendlein, A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2012-04-16
- Volume
- 22
- Issue
- 14
- Pages
- 3057-3065
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2047222227
- Cited by
- 143
- References
- 13
- FWCI
- 23.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.