The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Na2FeP2O7 as a Promising Iron‐Based Pyrophosphate Cathode for Sodium Rechargeable Batteries: A Combined Experimental and Theoretical Study
Abstract
Considering the promising electrochemical performance of the recently reported pyrophosphate family in lithium ion batteries as well as the increasing importance of sodium ion batteries (SIBs) for emerging large‐scale applications, here, the crystal structure, electrochemical properties, and thermal stability of Na 2 FeP 2 O 7, the first example ever reported in the pyrophosphate family for SIBs, are investigated. Na 2 FeP 2 O 7 maintains well‐defined channel structures (triclinic framework under the P1 space group) and exhibits a reversible capacity of ≈90 mAh g−1 with good cycling performance. Both quasi‐equilibrium measurements and first‐principles calculations consistently indicate that Na 2 FeP 2 O 7 undergoes two kinds of reactions over the entire voltage range of 2.0–4.5 V (vs Na/Na+): a single‐phase reaction around 2.5 V and a series of two‐phase reactions in the voltage range of 3.0–3.25 V. Na 2 FeP 2 O 7 shows excellent thermal stability up to 500 °C, even in the partially desodiated state (NaFeP 2 O 7), which suggests its safe character, a property that is very critical for large‐scale battery applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Special points for Brillouin-zone integrations
Monkhorst, H. J., & Pack, J. D. (1976) · Physical Review B · doi:10.1103/physrevb.13.5188 · Cited by 71,721
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study
Dudarev, S. L., Botton, G. A., Savrasov, S. Y., Humphreys, C. J., & Sutton, A. P. (1998) · Physical Review B · doi:10.1103/physrevb.57.1505 · Cited by 15,173
Reversible work transition state theory: application to dissociative adsorption of hydrogen
Mills, G., Jónsson, H., & Schenter, G. K. (1995) · Surface Science · doi:10.1016/0039-6028(94)00731-4 · Cited by 2,359
Ong, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ma, X., & Ceder, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01782a · Cited by 1,415
Ab initio study of lithium intercalation in metal oxides and metal dichalcogenides
Aydinol, M. K., Kohan, A. F., Ceder, G., Cho, K., & Joannopoulos, J. (1997) · Physical Review B · doi:10.1103/physrevb.56.1354 · Cited by 1,388
First-principles prediction of redox potentials in transition-metal compounds withLDA+U
Zhou, F., Cococcioni, M., Marianetti, C. A., Morgan, D., & Ceder, G. (2004) · Physical Review B · doi:10.1103/physrevb.70.235121 · Cited by 1,085
Cited by
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Recent Advances and Prospects of Cathode Materials for Sodium‐Ion Batteries
Xiang, X., Zhang, K., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201501527 · Cited by 1,160
Islam, M. S., & Fisher, C. A. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60199d · Cited by 1,079
Update on Na-based battery materials. A growing research path
Palomares, V., Casas-Cabanas, M., Castillo-Martínez, E., Han, M. H., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41031e · Cited by 992
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
Self-citationPolyanion-type cathode materials for sodium-ion batteries
Jin, T., Li, H., Zhu, K., Wang, P.-F., Liu, P., & Jiao, L. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00846b · Cited by 908
A 3.8-V earth-abundant sodium battery electrode
Barpanda, P., Oyama, G., Nishimura, S.-I., Chung, S.-C., & Yamada, A. (2014) · Nature Communications · doi:10.1038/ncomms5358 · Cited by 873
Potassium-ion batteries: outlook on present and future technologies
Min, X., Xiao, J., Fang, M., Wang, W. (., Zhao, Y., Liu, Y., Abdelkader, A. M., Xi, K., Kumar, R. V., & Huang, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02917c · Cited by 761
Nanowire Electrodes for Electrochemical Energy Storage Devices
Mai, L., Tian, X., Xu, X., Chang, L., & Xu, L. (2014) · Chemical Reviews · doi:10.1021/cr500177a · Cited by 700
Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion
Alkhadra, M. A., Su, X., Suss, M. E., Tian, H., Guyes, E. N., Shocron, A. N., Conforti, K. M., de Souza, J. P., Kim, N., Tedesco, M., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00396 · Cited by 661
Materials Design for High‐Safety Sodium‐Ion Battery
Yang, C., Xin, S., Mai, L., & You, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000974 · Cited by 630
Polyanion‐Type Electrode Materials for Sodium‐Ion Batteries
Ni, Q., Bai, Y., Wu, F., & Wu, C. (2017) · Advanced Science · doi:10.1002/advs.201600275 · Cited by 586
An Advanced Sodium‐Ion Battery Composed of Carbon Coated Na3V2(PO4)3 in a Porous Graphene Network
Rui, X., Sun, W., Wu, C., Yu, Y., & Yan, Q. (2015) · Advanced Materials · doi:10.1002/adma.201502864 · Cited by 545
A New High-Energy Cathode for a Na-Ion Battery with Ultrahigh Stability
Park, Y.-U., Seo, D.-H., Kwon, H.-S., Kim, B., Kim, J., Kim, H., Kim, I., Yoo, H.-I., & Kang, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406016j · Cited by 442
Self-citationLim, E., Jo, C., Kim, M. S., Kim, M., Chun, J., Kim, H., Park, J., Roh, K. C., Kang, K., Yoon, S., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505548 · Cited by 408
Self-citationKim, H., Park, I., Lee, S., Kim, H., Park, K.-Y., Park, Y.-U., Kim, H., Kim, J., Lim, H.-D., Yoon, W.-S., et al. (2013) · Chemistry of Materials · doi:10.1021/cm4013816 · Cited by 406
Self-citationKim, J., Seo, D.-H., Kim, H., Park, I., Yoo, J.-K., Jung, S.-K., Park, Y.-U., Goddard III, W. A., & Kang, K. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03215b · Cited by 398
Self-citationPhosphate Framework Electrode Materials for Sodium Ion Batteries
Fang, Y., Zhang, J., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2017) · Advanced Science · doi:10.1002/advs.201600392 · Cited by 381
Park, Y., Seo, D., Kim, H., Kim, J., Lee, S., Kim, B., & Kang, K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400561 · Cited by 351
Self-citationChallenges and Strategies toward Cathode Materials for Rechargeable Potassium‐Ion Batteries
Liu, S., Kang, L., & Jun, S. C. (2021) · Advanced Materials · doi:10.1002/adma.202004689 · Cited by 345
Chen, M., Liu, Q., Wang, S., Wang, E., Guo, X., & Chou, S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803609 · Cited by 341
Wang, T., Su, D., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0009-9 · Cited by 328
Faradaic Electrodes Open a New Era for Capacitive Deionization
Li, Q., Zheng, Y., Xiao, D., Or, T., Gao, R., Li, Z., Feng, M., Shui, L., Zhou, G., Wang, X., et al. (2020) · Advanced Science · doi:10.1002/advs.202002213 · Cited by 288
Xu, G., Amine, R., Abouimrane, A., Che, H., Dahbi, M., Ma, Z., Saadoune, I., Alami, J., Mattis, W. L., Pan, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702403 · Cited by 287
Mesoporous Amorphous FePO4Nanospheres as High-Performance Cathode Material for Sodium-Ion Batteries
Fang, Y., Xiao, L., Qian, J., Ai, X., Yang, H., & Cao, Y. (2014) · Nano Letters · doi:10.1021/nl501152f · Cited by 268
Na2FeP2O7 as a Novel Material for Hybrid Capacitive Deionization
Kim, S., Lee, J., Kim, C., & Yoon, J. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.056 · Cited by 254
Metadata
- Authors
- Kim, H., Shakoor, R. A., Park, C., Lim, S. Y., Kim, J., Jo, Y. N., Cho, W., Miyasaka, K., Kahraman, R., Jung, Y., & Choi, J. W.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2012-10-08
- Volume
- 23
- Issue
- 9
- Pages
- 1147-1155
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2060507002
- Cited by
- 407
- References
- 23
- FWCI
- 10.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.