The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
32 × 32 Crossbar Array Resistive Memory Composed of a Stacked Schottky Diode and Unipolar Resistive Memory
Abstract
Various array types of 1‐diode and 1‐resistor stacked crossbar array (1D1R CA) devices composed of a Schottky diode (SD) (Pt/TiO 2/Ti/Pt) and a resistive switching (RS) memory cell (Pt/TiO 2/Pt) are fabricated and their performances are investigated. The unit cell of the 1D1R CA device shows high RS resistance ratio (≈10 3 at 1.5 V) between low and high resistance state (LRS and HRS), and high rectification ratio (≈10 5) between LRS and reverse‐state SD. It also shows a short RS time of <50 ns for SET (resistance transition from HRS to LRS), and ≈600 ns for RESET (resistance transition from LRS to HRS), as well as stable RS endurance and data retention characteristics. It is experimentally confirmed that the selected unit cell in HRS (logically the “off” state) is stably readable when it is surrounded by unselected LRS (logically the “on” state) cells, in an array of up to 32 × 32 cells. The SD, as a highly non‐linear resistor, appropriately controls the conducting path formation during the switching and protects the memory element from the noise during retention.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Lee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228
‘Memristive’ switches enable ‘stateful’ logic operations via material implication
Borghetti, J., Snider, G. S., Kuekes, P. J., Yang, J. J., Stewart, D. R., & Williams, R. S. (2010) · Nature · doi:10.1038/nature08940 · Cited by 1,929
Kim, K.-H., Gaba, S., Wheeler, D., Cruz-Albrecht, J. M., Hussain, T., Srinivasa, N., & Lu, W. (2012) · Nano Letters · doi:10.1021/nl203687n · Cited by 924
Pickett, M. D., & Stanley Williams, R. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/21/215202 · Cited by 385
Cited by
Training and operation of an integrated neuromorphic network based on metal-oxide memristors
Prezioso, M., Merrikh-Bayat, F., Hoskins, B. D., Adam, G. C., Likharev, K. K., & Strukov, D. B. (2015) · Nature · doi:10.1038/nature14441 · Cited by 3,001
Resistive switching materials for information processing
Wang, Z., Wu, H., Burr, G. W., Hwang, C. S., Wang, K. L., Xia, Q., & Yang, J. J. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0159-3 · Cited by 1,214
Self-citationPattern classification by memristive crossbar circuits using ex situ and in situ training
Alibart, F., Zamanidoost, E., & Strukov, D. B. (2013) · Nature Communications · doi:10.1038/ncomms3072 · Cited by 642
Resistive switching phenomena: A review of statistical physics approaches
Lee, J. S., Lee, S., & Noh, T. W. (2015) · Applied Physics Reviews · doi:10.1063/1.4929512 · Cited by 463
Self-citationSeok, J. Y., Song, S. J., Yoon, J. H., Yoon, K. J., Park, T. H., Kwon, D. E., Lim, H., Kim, G. H., Jeong, D. S., & Hwang, C. S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303520 · Cited by 383
Self-citation
Metadata
- Authors
- Kim, G. H., Lee, J. H., Ahn, Y., Jeon, W., Song, S. J., Seok, J. Y., Yoon, J. H., Yoon, K. J., Park, T. J., & Hwang, C. S.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2012-10-18
- Volume
- 23
- Issue
- 11
- Pages
- 1440-1449
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2019081715
- Cited by
- 174
- References
- 7
- FWCI
- 8.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.