The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Printing Patterned Fine 3D Structures by Manipulating the Three Phase Contact Line
Abstract
The preparation of fine 3D microstructures is an attractive issue; however, it is limited at large‐area fabrication process and fineness morphology manipulation. Here, we propose a strategy to fabricate controllable 3D structures and morphologies from one single droplet via ink‐jet printing. Based on the surface energy difference between the hydrophilic patterns and hydrophobic surface, the three phase contact line of a droplet contained nanoparticles is forced to pin on the patterned hydrophilic points and asymmetrically dewets on the hydrophobic surface, which leads to various morphologies. Through the regulation of pinning patterns and solution properties, the 3D morphology can be well manipulated. This strategy to control the 3D morphology of nanoparticle assembly based on hydrophilic patterns would be of great importance for fabricating controllable 3D structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An ultra-lightweight design for imperceptible plastic electronics
Kaltenbrunner, M., Sekitani, T., Reeder, J., Yokota, T., Kuribara, K., Tokuhara, T., Drack, M., Schwödiauer, R., Graz, I., Bauer-Gogonea, S., et al. (2013) · Nature · doi:10.1038/nature12314 · Cited by 2,485
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Cited by
Inkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
Self-citationEfficient wettability-controlled electroreduction of CO2 to CO at Au/C interfaces
Shi, R., Guo, J., Zhang, X., Waterhouse, G. I. N., Han, Z., Zhao, Y., Shang, L., Zhou, C., Jiang, L., & Zhang, T. (2020) · Nature Communications · doi:10.1038/s41467-020-16847-9 · Cited by 531
Self-citationPatterned Colloidal Photonic Crystals
Hou, J., Li, M., & Song, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201704752 · Cited by 510
Self-citationSynthesis, Assembly, and Applications of Hybrid Nanostructures for Biosensing
Zhang, S., Geryak, R., Geldmeier, J., Kim, S., & Tsukruk, V. V. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00088 · Cited by 340
Bioinspired conductive cellulose liquid-crystal hydrogels as multifunctional electrical skins
Zhang, Z., Chen, Z., Wang, Y., & Zhao, Y. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2007032117 · Cited by 285
Metadata
- Authors
- Wu, L., Dong, Z., Kuang, M., Li, Y., Li, F., Jiang, L., & Song, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2015-02-16
- Volume
- 25
- Issue
- 15
- Pages
- 2237-2242
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W1967050938
- Cited by
- 190
- References
- 3
- FWCI
- 10.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.