The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Ultrathin MnO2/Graphene Oxide/Carbon Nanotube Interlayer as Efficient Polysulfide‐Trapping Shield for High‐Performance Li–S Batteries
Abstract
Ultrathin MnO 2/graphene oxide/carbon nanotube (G/M@CNT) interlayers are developed as efficient polysulfide‐trapping shields for high‐performance Li–S batteries. A simple layer‐by‐layer procedure is used to construct a sandwiched vein–membrane interlayer of thickness 2 µm and areal density 0.104 mg cm−2 by loading MnO 2 nanoparticles and graphene oxide (GO) sheets on superaligned carbon nanotube films. The G/M@CNT interlayer provides a physical shield against both polysulfide shuttling and chemical adsorption of polysulfides by MnO 2 nanoparticles and GO sheets. The synergetic effect of the G/M@CNT interlayer enables the production of Li–S cells with high sulfur loadings (60–80 wt%), a low capacity decay rate (−0.029% per cycle over 2500 cycles at 1 C), high rate performance (747 mA h g−1 at a charge rate of 10 C), and a low self‐discharge rate with high capacity retention (93.0% after 20 d rest). Electrochemical impedance spectroscopy, cyclic voltammetry, and scanning electron microscopy observations of the Li anodes after cycling confirm the polysulfide‐trapping ability of the G/M@CNT interlayer and show its potential in developing high‐performance Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Arora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Cited by
Zhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Self-citationAdvances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering
Wang, Y., Zhang, R., Chen, J., Wu, H., Lu, S., Wang, K., Li, H., Harris, C. J., Xi, K., Kumar, R. V., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900953 · Cited by 447
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Zhong, Y., Chao, D., Deng, S., Zhan, J., Fang, R., Xia, Y., Wang, Y., Wang, X., Xia, X., & Tu, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706391 · Cited by 428
Ye, C., Zhang, L., Guo, C., Li, D., Vasileff, A., Wang, H., & Qiao, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702524 · Cited by 407
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Stabilized Li3N for efficient battery cathode prelithiation
Sun, Y., Li, Y., Sun, J., Li, Y., Pei, A., & Cui, Y. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.004 · Cited by 402
Rational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Yao, W., Xu, J., Ma, L., Lu, X., Luo, D., Qian, J., Zhan, L., Manke, I., Yang, C., Adelhelm, P., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212116 · Cited by 317
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Carbon nanotube-based materials for lithium–sulfur batteries
Zheng, M., Chi, Y., Hu, Q., Tang, H., Jiang, X., Zhang, L., Zhang, S., Pang, H., & Xu, Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05347f · Cited by 311
Rana, M., Ahad, S. A., Li, M., Luo, B., Wang, L., Gentle, I., & Knibbe, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.024 · Cited by 301
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Zhang, L., Chen, X., Wan, F., Niu, Z., Wang, Y., Zhang, Q., & Chen, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b05466 · Cited by 259
Graphene oxide: An emerging electromaterial for energy storage and conversion
Tian, Y., Yu, Z., Cao, L., Zhang, X. L., Sun, C., & Wang, D.-W. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.07.006 · Cited by 240
Self-citationHow Far Away Are Lithium-Sulfur Batteries From Commercialization?
Zhu, K., Wang, C., Chi, Z., Ke, F., Yang, Y., Wang, A., Wang, W., & Miao, L. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00123 · Cited by 181
Metadata
- Authors
- Kong, W., Yan, L., Luo, Y., Wang, D., Jiang, K., Li, Q., Fan, S., & Wang, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-03-24
- Volume
- 27
- Issue
- 18
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2602495095
- Cited by
- 376
- References
- 44
- FWCI
- 23.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.