The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells
Abstract
2D halide perovskites have recently been recognized as a promising avenue in perovskite solar cells (PSCs) in terms of encouraging stability and defect passivation effect. However, the efficiency (less than 15%) of ultrastable 2D Ruddlesden–Popper PSCs still lag far behind their traditional 3D perovskite counterparts. Here, a rationally designed 2D‐3D perovskite stacking‐layered architecture by in situ growing 2D PEA 2 PbI 4 capping layers on top of 3D perovskite film, which drastically improves the stability of PSCs without compromising their high performance, is reported. Such a 2D perovskite capping layer induces larger Fermi‐level splitting in the 2D‐3D perovskite film under light illumination, resulting in an enhanced open‐circuit voltage (Voc) and thus a higher efficiency of 18.51% in the 2D‐3D PSCs. Time‐resolved photoluminescence decay measurements indicate the facilitated hole extraction in the 2D‐3D stacking‐layered perovskite films, which is ascribed to the optimized energy band alignment and reduced nonradiative recombination at the subgap states. Benefiting from the high moisture resistivity as well as suppressed ion migration of the 2D perovskite, the 2D‐3D PSCs show significantly improved long‐term stability, retaining nearly 90% of the initial power conversion efficiency after 1000 h exposure in the ambient conditions with a high relative humidity level of 60 ± 10%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
Perovskite energy funnels for efficient light-emitting diodes
Yuan, M., Quan, L. N., Comin, R., Walters, G., Sabatini, R., Voznyy, O., Hoogland, S., Zhao, Y., Beauregard, E. M., Kanjanaboos, P., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.110 · Cited by 2,325
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Self-citationOne-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Cited by
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications
Jung, M., Ji, S.-G., Kim, G., & Seok, S. I. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00656c · Cited by 816
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
Li, F., Deng, X., Qi, F., Li, Z., Liu, D., Shen, D., Qin, M., Wu, S., Lin, F., Jang, S.-H., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c09845 · Cited by 655
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth
Jang, Y.-W., Lee, S., Yeom, K. M., Jeong, K., Choi, K., Choi, M., & Noh, J. H. (2021) · Nature Energy · doi:10.1038/s41560-020-00749-7 · Cited by 605
Hao, M., Bai, Y., Zeiske, S., Ren, L., Liu, J., Yuan, Y., Zarrabi, N., Cheng, N., Ghasemi, M., Chen, P., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0535-7 · Cited by 587
Self-citationProgress of Lead‐Free Halide Double Perovskites
Igbari, F., Wang, Z., & Liao, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803150 · Cited by 562
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Gharibzadeh, S., Abdollahi Nejand, B., Jakoby, M., Abzieher, T., Hauschild, D., Moghadamzadeh, S., Schwenzer, J. A., Brenner, P., Schmager, R., Haghighirad, A. A., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803699 · Cited by 435
The surface of halide perovskites from nano to bulk
Xue, J., Wang, R., & Yang, Y. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0221-1 · Cited by 395
Ni, Z., Jiao, H., Fei, C., Gu, H., Xu, S., Yu, Z., Yang, G., Deng, Y., Jiang, Q., Liu, Y., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00949-9 · Cited by 390
Ye, J., Byranvand, M. M., Martínez, C. O., Hoye, R. L. Z., Saliba, M., & Polavarapu, L. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202102360 · Cited by 389
A review of aspects of additive engineering in perovskite solar cells
Mahapatra, A., Prochowicz, D., Tavakoli, M. M., Trivedi, S., Kumar, P., & Yadav, P. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07657c · Cited by 369
New Strategies for Defect Passivation in High‐Efficiency Perovskite Solar Cells
Akin, S., Arora, N., Zakeeruddin, S. M., Grätzel, M., Friend, R. H., & Dar, M. I. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903090 · Cited by 352
Efficient α-CsPbI3 Photovoltaics with Surface Terminated Organic Cations
Wang, Y., Zhang, T., Kan, M., Li, Y., Wang, T., & Zhao, Y. (2018) · Joule · doi:10.1016/j.joule.2018.06.013 · Cited by 348
Kim, H., Lee, S., Lee, D. Y., Paik, M. J., Na, H., Lee, J., & Seok, S. I. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902740 · Cited by 346
Zhang, M., Chen, Q., Xue, R., Zhan, Y., Wang, C., Lai, J., Yang, J., Lin, H., Yao, J., Li, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12613-8 · Cited by 330
Mohd Yusoff, A. R. B., Vasilopoulou, M., Georgiadou, D. G., Palilis, L. C., Abate, A., & Nazeeruddin, M. K. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00062d · Cited by 327
Zhou, Q., Liang, L., Hu, J., Cao, B., Yang, L., Wu, T., Li, X., Zhang, B., & Gao, P. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802595 · Cited by 294
Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: a review
Ren, G., Han, W., Deng, Y., Wu, W., Li, Z., Guo, J., Bao, H., Liu, C., & Guo, W. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta11564a · Cited by 294
High‐Quality Ruddlesden–Popper Perovskite Film Formation for High‐Performance Perovskite Solar Cells
Liu, P., Han, N., Wang, W., Ran, R., Zhou, W., & Shao, Z. (2021) · Advanced Materials · doi:10.1002/adma.202002582 · Cited by 294
Gharibzadeh, S., Fassl, P., Hossain, I. M., Rohrbeck, P., Frericks, M., Schmidt, M., Duong, T., Khan, M. R., Abzieher, T., Nejand, B. A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01508g · Cited by 289
Stability of 2D and quasi-2D perovskite materials and devices
Leung, T. L., Ahmad, I., Syed, A. A., Ng, A. M. C., Popović, J., & Djurišić, A. B. (2022) · Communications Materials · doi:10.1038/s43246-022-00285-9 · Cited by 279
Ion-induced field screening as a dominant factor in perovskite solar cell operational stability
Thiesbrummel, J., Shah, S., Gutierrez-Partida, E., Zu, F., Peña-Camargo, F., Zeiske, S., Diekmann, J., Ye, F., Peters, K. P., Brinkmann, K. O., et al. (2024) · Nature Energy · doi:10.1038/s41560-024-01487-w · Cited by 267
Zhuang, J., Mao, P., Luan, Y., Yi, X., Tu, Z., Zhang, Y., Yi, Y., Wei, Y., Chen, N., Lin, T., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02375 · Cited by 266
Liang, L., Luo, H., Hu, J., Li, H., & Gao, P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000197 · Cited by 260
Yang, Z., Dou, J., Kou, S., Dang, J., Ji, Y., Yang, G., Wu, W., Kuang, D., & Wang, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910710 · Cited by 258
Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Advanced Organic–Inorganic Hybrid Materials for Optoelectronic Applications
Zhou, K., Qi, B., Liu, Z., Wang, X., Sun, Y., & Zhang, L. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202411671 · Cited by 228
Recent progress in perovskite solar cells: from device to commercialization
Luo, X., Lin, X., Gao, F., Zhao, Y., Li, X., Zhan, L., Qiu, Z., Wang, J., Chen, C., Meng, L., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1426-x · Cited by 142
Xu, J., Cui, J., Yang, S., Liu, Z., Guo, X., Che, Y., Xu, D., Zhao, W., Yuan, N., Ding, J., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202202829 · Cited by 59
Metadata
- Authors
- Chen, P., Bai, Y., Wang, S., Lyu, M., Yun, J., & Wang, L.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-02-13
- Volume
- 28
- Issue
- 17
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2791826156
- Cited by
- 776
- References
- 56
- FWCI
- 33.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.