The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Functional Carbons Remedy the Shuttling of Polysulfides in Lithium–Sulfur Batteries: Confining, Trapping, Blocking, and Breaking up
Abstract
Carbon materials are usually used as the sulfur host in rechargeable lithium–sulfur (Li–S) batteries that are considered as promising electrochemical energy storage systems. However, the “shuttling” caused by the soluble lithium polysulfides (LiPSs) formed by the reaction of Li and sulfur causes rapid capacity fade and low sulfur utilization, greatly hindering their practical use. The carbon materials can also be tailored to prevent LiPS shuttling because of their abundant porosity and controllable surface chemical properties, which are divided into four specific functions: confining, trapping, blocking, and breaking up. Confinement means physically confining the LiPSs in pores in the carbon while trapping refers to chemical adsorption on the carbon surface to restrict their diffusion and promote their transformation to insoluble Li 2 S 2/Li 2 S. Blocking means placing a barrier in the cells to inhibit LiPS diffusion to the anode, while breaking up means decreasing the size of the sulfur moiety to increase its affinity with carbons. The advantages and disadvantages of functional carbons in relation to these four functions are summarized and the specific ways to achieve them are highlighted. The design of advanced carbons with synergistic functions is discussed and some perspectives on the future development of carbons in Li–S batteries are given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Cited by
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Layered Transition Metal Dichalcogenide‐Based Nanomaterials for Electrochemical Energy Storage
Yun, Q., Li, L., Hu, Z., Lu, Q., Chen, B., & Zhang, H. (2020) · Advanced Materials · doi:10.1002/adma.201903826 · Cited by 506
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
Metadata
- Authors
- Shi, H., Lv, W., Zhang, C., Wang, D., Ling, G., He, Y., Kang, F., & Yang, Q.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-03-25
- Volume
- 28
- Issue
- 38
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2793974014
- Cited by
- 205
- References
- 1
- FWCI
- 10.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Functional Carbons Remedy the Shuttling of Polysulfides in Lithium–Sulfur Batteries: Confining, Trapping, Blocking, and Breaking up. https://app.cochat.ai/papers/10.1002/adfm.201800508
- The paper
- Shi, H., Lv, W., Zhang, C., Wang, D., Ling, G., He, Y., Kang, F., & Yang, Q. (2018). Functional Carbons Remedy the Shuttling of Polysulfides in Lithium–Sulfur Batteries: Confining, Trapping, Blocking, and Breaking up. Advanced Functional Materials. https://doi.org/10.1002/adfm.201800508
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.