The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Programmed Deformations of 3D‐Printed Tough Physical Hydrogels with High Response Speed and Large Output Force
Abstract
Shape‐morphing hydrogels have emerging applications in biomedical devices, soft robotics, and so on. However, successful applications require a combination of excellent mechanical properties and fast responding speed, which are usually a trade‐off in hydrogel‐based devices. Here, a facile approach to fabricate 3D gel constructs by extrusion‐based printing of tough physical hydrogels, which show programmable deformations with high response speed and large output force, is described. Highly viscoelastic poly(acrylic acid‐co‐acrylamide) (P(AAc‐co‐AAm)) and poly(acrylic acid‐co‐N‐isopropyl acrylamide) (P(AAc‐co‐NIPAm)) solutions or their mixtures are printed into 3D constructs by using multiple nozzles, which are then transferred into FeCl 3 solution to gel the structures by forming robust carboxyl–Fe 3+ coordination complexes. The printed gel fibers containing poly(N‐isopropyl acrylamide) segment exhibit considerable volume contraction in concentrated saline solution, whereas the P(AAc‐co‐AAm) ones do not contract. The mismatch in responsiveness of the gel fibers affords the integrated 3D gel constructs the shape‐morphing ability. Because of the small diameter of gel fibers, the printed gel structures deform and recover with a fast speed. A four‐armed gripper is designed to clamp plastic balls with considerable holding force, as large as 115 times the weight of the gripper. This strategy should be applicable to other tough hydrogels and broaden their applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Giving Direction to Motion and Surface with Ultra‐Fast Speed Using Oriented Hydrogel Fibers
Liu, L., Jiang, S., Sun, Y., & Agarwal, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503612 · Cited by 140
Cited by
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Self-citationMussel-inspired hydrogels: From design principles to promising applications
Zhang, C., Wu, B., Zhou, Y., Zhou, F., Liu, W., & Wang, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00849g · Cited by 653
El-Husseiny, H. M., Mady, E. A., Hamabe, L., Abugomaa, A., Shimada, K., Yoshida, T., Tanaka, T., Yokoi, A., Elbadawy, M., & Tanaka, R. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100186 · Cited by 533
4D Printing of Hydrogels: A Review
Champeau, M., Heinze, D. A., Viana, T. N., de Souza, E. R., Chinellato, A. C., & Titotto, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910606 · Cited by 443
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Metadata
- Authors
- Zheng, S. Y., Shen, Y., Zhu, F., Yin, J., Qian, J., Fu, J., Wu, Z. L., & Zheng, Q.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-07-27
- Volume
- 28
- Issue
- 37
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2883681670
- Cited by
- 242
- References
- 4
- FWCI
- 15.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Programmed Deformations of 3D‐Printed Tough Physical Hydrogels with High Response Speed and Large Output Force. https://app.cochat.ai/papers/10.1002/adfm.201803366
- The paper
- Zheng, S. Y., Shen, Y., Zhu, F., Yin, J., Qian, J., Fu, J., Wu, Z. L., & Zheng, Q. (2018). Programmed Deformations of 3D‐Printed Tough Physical Hydrogels with High Response Speed and Large Output Force. Advanced Functional Materials. https://doi.org/10.1002/adfm.201803366
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.