The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Pillared MXene with Ultralarge Interlayer Spacing as a Stable Matrix for High Performance Sodium Metal Anodes
Abstract
Sodium (Na) metal is a promising alternative to lithium metal as an anode material for the next‐generation energy storage systems due to its high theoretical capacity, low cost, and natural abundance. However, dendritic/mossy Na growth caused by uncontrollable plating/stripping results in serious safe concerns and rapid electrode degradation. This study presents Sn 2+ pillared Ti 3 C 2 MXene serving as a stable matrix for high‐performance dendrite‐free Na metal anode. The intercalated Sn 2+ between Ti 3 C 2 layers not only induces Na to nucleate and grow within Ti 3 C 2 interlayers, but also endows the Ti 3 C 2 with larger interlayer space to accommodate the deposited Na by taking advantage of the “pillar effect,” contributing to uniform Na deposition. As a result, the pillar‐structured MXene‐based Na metal electrode could enable high current density (up to 10 mA cm−2) along with high areal capacity (up to 5 mAh cm−2) over long‐term cycling (up to 500 cycles). The full cell using MXene‐based Na metal anode exhibits superior electrochemical performance than that using host‐less commercial Na. It is believed that the well‐controlled MXene‐based Na anode not only extends the application scope of MXene, but also provides guidance in designing high‐performance Na metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Two-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Cited by
Characterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
Zhang, C. (., Ma, Y., Zhang, X., Abdolhosseinzadeh, S., Sheng, H., Lan, W., Pakdel, A., Heier, J., & Nüesch, F. (2020) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12058 · Cited by 605
Lim, K. R. G., Handoko, A. D., Nemani, S. K., Wyatt, B., Jiang, H.-Y., Tang, J., Anasori, B., & Seh, Z. W. (2020) · ACS Nano · doi:10.1021/acsnano.0c05482 · Cited by 585
MXenes for Rechargeable Batteries Beyond the Lithium‐Ion
Ming, F., Liang, H., Huang, G., Bayhan, Z., & Alshareef, H. N. (2021) · Advanced Materials · doi:10.1002/adma.202004039 · Cited by 424
Interface Chemistry on MXene‐Based Materials for Enhanced Energy Storage and Conversion Performance
Hui, X., Ge, X., Zhao, R., Li, Z., & Yin, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005190 · Cited by 385
Recent Advances and Promise of MXene‐Based Nanostructures for High‐Performance Metal Ion Batteries
Dong, Y., Shi, H., & Wu, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000706 · Cited by 369
Suppressing the Shuttle Effect and Dendrite Growth in Lithium–Sulfur Batteries
Wang, J., Yi, S., Liu, J., Sun, S., Liu, Y., Yang, D., Xi, K., Gao, G., Abdelkader, A., Yan, W., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c02241 · Cited by 344
How to avoid dendrite formation in metal batteries: Innovative strategies for dendrite suppression
Aslam, M. K., Niu, Y., Hussain, T., Tabassum, H., Tang, W., Xu, M., & Ahuja, R. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106142 · Cited by 308
Xu, X., Zhang, Y., Sun, H., Zhou, J., Yang, F., Li, H., Chen, H., Chen, Y., Liu, Z., Qiu, Z., et al. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202000967 · Cited by 305
Xie, X., & Zhang, N. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002528 · Cited by 276
Zhang, R., Dong, J., Zhang, W., Ma, L., Jiang, Z., Wang, J., & Huang, Y. (2022) · Nano Energy · doi:10.1016/j.nanoen.2021.106633 · Cited by 257
Self-citationKnocking down the kinetic barriers towards fast-charging and low-temperature sodium metal batteries
Zheng, X., Gu, Z., Fu, J., Wang, H., Ye, X., Huang, L., Liu, X., Wu, X., Luo, W., & Huang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01404h · Cited by 256
Self-citationZheng, J., Pan, X., Huang, X., Xiong, D., Shang, Y., Li, X., Wang, N., Lau, W.-M., & Yang, H. Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125197 · Cited by 240
Lu, X., Zhao, H., Qin, Y., Matios, E., Luo, J., Chen, R., Nan, H., Wen, B., Zhang, Y., Li, Y., et al. (2023) · ACS Nano · doi:10.1021/acsnano.3c01759 · Cited by 53
Self-citation
Metadata
- Authors
- Luo, J., Wang, C., Wang, H., Hu, X., Matios, E., Lu, X., Zhang, W., Tao, X., & Li, W.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-11-27
- Volume
- 29
- Issue
- 3
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2902797989
- Cited by
- 352
- References
- 59
- FWCI
- 13.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.