The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Hierarchical Co3O4 Nanofiber–Carbon Sheet Skeleton with Superior Na/Li‐Philic Property Enabling Highly Stable Alkali Metal Batteries
Abstract
Uncontrollable dendritic behavior and infinite volume expansion in alkali metal anode results in the severe safety hazards and short lifespan for high‐energy batteries. Constructing a stable host with superior Na/Li‐philic properties is a prerequisite for commercialization. Here, it is demonstrated that the small Gibbs free energy change in the reaction between metal oxide (Co 3 O 4, SnO 2, and CuO) and alkali metal is key for metal infusion. The as‐prepared hierarchical Co 3 O 4 nanofiber–carbon sheet (CS) skeleton shows improved wettability toward molten Li/Na. The 3D carbon sheet serves as a primary framework, offering adequate lithium nucleation sites and sufficient electrolyte/electrode contact for fast charge transfer. The secondary framework of Co/Li 2 O nanofibers provides physical confinement of deposited Li and further redistributes the Li+ flux on each carbon fiber, which is verified by COMSOL Multiphysics simulations. Due to the uniform deposition behavior and near‐zero volume change, modified symmetrical Li/Li cells can operate under an ultrahigh current density of 20 mA cm−2 for more than 120 cycles. When paired with LiFePO 4 cathodes, the Li/Co–CS cell shows low polarization and 88.4% capacity retention after 200 cycles under 2 C. Convincing improvement can also be observed in Na/Co–CS symmetrical cells applying NaClO 4‐based electrolyte. These results illustrate a significant improvement in developing safe and stable alkali metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Cited by
Confronting the Challenges in Lithium Anodes for Lithium Metal Batteries
Wang, Q., Liu, B., Shen, Y., Wu, J., Zhao, Z., Zhong, C., & Hu, W. (2021) · Advanced Science · doi:10.1002/advs.202101111 · Cited by 531
Designing safer lithium-based batteries with nonflammable electrolytes: A review
Zhang, S., Li, S., & Lu, Y. (2021) · eScience · doi:10.1016/j.esci.2021.12.003 · Cited by 337
Self-citationRecent progress on transition metal oxides as advanced materials for energy conversion and storage
Yuan, S., Duan, X., Liu, J., Ye, Y., Lv, F., Liu, T., Wang, Q., & Zhang, X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.07.007 · Cited by 329
Synergistic Dual‐Additive Electrolyte Enables Practical Lithium‐Metal Batteries
Li, S., Zhang, W., Wu, Q., Fan, L., Wang, X., Wang, X., Shen, Z., He, Y., & Lu, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202004853 · Cited by 318
Self-citationAdvances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Park, S., Jin, H., & Yun, Y. S. (2020) · Advanced Materials · doi:10.1002/adma.202002193 · Cited by 301
Metadata
- Authors
- Li, S., Liu, Q., Zhou, J., Pan, T., Gao, L., Zhang, W., Fan, L., & Lu, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-02-20
- Volume
- 29
- Issue
- 19
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2915628690
- Cited by
- 191
- References
- 1
- FWCI
- 11.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hierarchical Co3O4 Nanofiber–Carbon Sheet Skeleton with Superior Na/Li‐Philic Property Enabling Highly Stable Alkali Metal Batteries. https://app.cochat.ai/papers/10.1002/adfm.201808847
- The paper
- Li, S., Liu, Q., Zhou, J., Pan, T., Gao, L., Zhang, W., Fan, L., & Lu, Y. (2019). Hierarchical Co3O4 Nanofiber–Carbon Sheet Skeleton with Superior Na/Li‐Philic Property Enabling Highly Stable Alkali Metal Batteries. Advanced Functional Materials. https://doi.org/10.1002/adfm.201808847
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.