The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
In Situ Inkjet Printing Strategy for Fabricating Perovskite Quantum Dot Patterns
Abstract
Perovskite quantum dots are emerging as attractive materials for photonic and optoelectronic applications. Patterning is an important step to incorporate them into display, anti‐counterfeiting, and optical chip applications. In this work, an in situ inkjet printing strategy is demonstrated for fabricating perovskite quantum dots patterns by printing perovskite precursor solutions onto a polymeric layer. Importantly, this strategy can achieve bright photoluminescence with a quantum yield up to 80% and shows broad applicability to a variety of perovskites and polymers. Moreover, the as‐fabricated perovskite quantum dots patterns are composed of a microdisks array on the surface of polymeric layer. The size of these microdisks can be varied by adjusting the printing temperature. To demonstrate the potential use in display and advanced anti‐counterfeiting applications, color pixel patterns and 2D code pattern are fabricated by varying the precursor solutions. The combination of superior photoluminescence properties, simple process, and low cost makes the in situ inkjet printing strategy very promising for patterning perovskite quantum dots toward photonic integrations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Zhang, F., Zhong, H., Chen, C., Wu, X.-G., Hu, X., Huang, H., Han, J., Zou, B., & Dong, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b01154 · Cited by 2,431
Self-citationPerovskite Materials for Light‐Emitting Diodes and Lasers
Veldhuis, S. A., Boix, P. P., Yantara, N., Li, M., Sum, T. C., Mathews, N., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201600669 · Cited by 1,465
White‐Light‐Emitting Diodes with Quantum Dot Color Converters for Display Backlights
Jang, E., Jun, S., Jang, H., Lim, J., Kim, B., & Kim, Y. (2010) · Advanced Materials · doi:10.1002/adma.201000525 · Cited by 1,085
Spectroscopic and Device Aspects of Nanocrystal Quantum Dots
Pietryga, J. M., Park, Y.-S., Lim, J., Fidler, A. F., Bae, W. K., Brovelli, S., & Klimov, V. I. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00169 · Cited by 1,040
Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect
Soltman, D., & Subramanian, V. (2008) · Langmuir · doi:10.1021/la7026847 · Cited by 994
Triple‐Mode Emission of Carbon Dots: Applications for Advanced Anti‐Counterfeiting
Jiang, K., Zhang, L., Lu, J., Xu, C., Cai, C., & Lin, H. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602445 · Cited by 812
Zhou, Q., Bai, Z., Lu, W., Wang, Y., Zou, B., & Zhong, H. (2016) · Advanced Materials · doi:10.1002/adma.201602651 · Cited by 781
Self-citationA review on suppression and utilization of the coffee-ring effect
Mampallil, D., & Eral, H. B. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.12.008 · Cited by 677
Cited by
Fang, M.-H., Bao, Z., Huang, W.-T., & Liu, R.-S. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00952 · Cited by 563
Three-dimensional direct lithography of stable perovskite nanocrystals in glass
Sun, K., Tan, D., Fang, X., Xia, X., Lin, D., Song, J., Lin, Y., Liu, Z., Gu, M., Yue, Y., et al. (2022) · Science · doi:10.1126/science.abj2691 · Cited by 498
Wei, C., Su, W., Li, J., Xu, B., Shan, Q., Wu, Y., Zhang, F., Luo, M., Xiang, H., Cui, Z., et al. (2022) · Advanced Materials · doi:10.1002/adma.202107798 · Cited by 284
In Situ Patterning Perovskite Quantum Dots by Direct Laser Writing Fabrication
Zhan, W., Meng, L., Shao, C., Wu, X.-G., Shi, K., & Zhong, H. (2021) · ACS Photonics · doi:10.1021/acsphotonics.1c00118 · Cited by 111
Self-citation
Metadata
- Authors
- Shi, L., Meng, L., Jiang, F., Ge, Y., Li, F., Wu, X., & Zhong, H.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-07-11
- Volume
- 29
- Issue
- 37
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2960218279
- Cited by
- 255
- References
- 36
- FWCI
- 9.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: In Situ Inkjet Printing Strategy for Fabricating Perovskite Quantum Dot Patterns. https://app.cochat.ai/papers/10.1002/adfm.201903648
- The paper
- Shi, L., Meng, L., Jiang, F., Ge, Y., Li, F., Wu, X., & Zhong, H. (2019). In Situ Inkjet Printing Strategy for Fabricating Perovskite Quantum Dot Patterns. Advanced Functional Materials. https://doi.org/10.1002/adfm.201903648
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.