The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
In Situ Inkjet Printing Strategy for Fabricating Perovskite Quantum Dot Patterns
Abstract
Perovskite quantum dots are emerging as attractive materials for photonic and optoelectronic applications. Patterning is an important step to incorporate them into display, anti‐counterfeiting, and optical chip applications. In this work, an in situ inkjet printing strategy is demonstrated for fabricating perovskite quantum dots patterns by printing perovskite precursor solutions onto a polymeric layer. Importantly, this strategy can achieve bright photoluminescence with a quantum yield up to 80% and shows broad applicability to a variety of perovskites and polymers. Moreover, the as‐fabricated perovskite quantum dots patterns are composed of a microdisks array on the surface of polymeric layer. The size of these microdisks can be varied by adjusting the printing temperature. To demonstrate the potential use in display and advanced anti‐counterfeiting applications, color pixel patterns and 2D code pattern are fabricated by varying the precursor solutions. The combination of superior photoluminescence properties, simple process, and low cost makes the in situ inkjet printing strategy very promising for patterning perovskite quantum dots toward photonic integrations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Zhang, F., Zhong, H., Chen, C., Wu, X.-G., Hu, X., Huang, H., Han, J., Zou, B., & Dong, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b01154 · Cited by 2,431
Self-citationPerovskite Materials for Light‐Emitting Diodes and Lasers
Veldhuis, S. A., Boix, P. P., Yantara, N., Li, M., Sum, T. C., Mathews, N., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201600669 · Cited by 1,465
Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect
Soltman, D., & Subramanian, V. (2008) · Langmuir · doi:10.1021/la7026847 · Cited by 1,152
White‐Light‐Emitting Diodes with Quantum Dot Color Converters for Display Backlights
Jang, E., Jun, S., Jang, H., Lim, J., Kim, B., & Kim, Y. (2010) · Advanced Materials · doi:10.1002/adma.201000525 · Cited by 1,085
Spectroscopic and Device Aspects of Nanocrystal Quantum Dots
Pietryga, J. M., Park, Y.-S., Lim, J., Fidler, A. F., Bae, W. K., Brovelli, S., & Klimov, V. I. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00169 · Cited by 1,040
Triple‐Mode Emission of Carbon Dots: Applications for Advanced Anti‐Counterfeiting
Jiang, K., Zhang, L., Lu, J., Xu, C., Cai, C., & Lin, H. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602445 · Cited by 812
Zhou, Q., Bai, Z., Lu, W., Wang, Y., Zou, B., & Zhong, H. (2016) · Advanced Materials · doi:10.1002/adma.201602651 · Cited by 781
Self-citationA review on suppression and utilization of the coffee-ring effect
Mampallil, D., & Eral, H. B. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.12.008 · Cited by 677
Metal halide perovskite light emitters
Kim, Y.-H., Cho, H., & Lee, T.-W. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1607471113 · Cited by 549
Pan, J., Sarmah, S. P., Murali, B., Dursun, I., Peng, W., Parida, M. R., Liu, J., Sinatra, L., Alyami, N., Zhao, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02460 · Cited by 527
Triple‐Mode Emission of Carbon Dots: Applications for Advanced Anti‐Counterfeiting
Jiang, K., Zhang, L., Lu, J., Xu, C., Cai, C., & Lin, H. (2016) · Angewandte Chemie · doi:10.1002/ange.201602445 · Cited by 496
Ultrastable, Highly Luminescent Organic–Inorganic Perovskite–Polymer Composite Films
Wang, Y., He, J., Chen, H., Chen, J., Zhu, R., Ma, P., Towers, A., Lin, Y., Gesquiere, A. J., Wu, S., et al. (2016) · Advanced Materials · doi:10.1002/adma.201603964 · Cited by 487
Kim, B. H., Onses, M. S., Lim, J. B., Nam, S., Oh, N., Kim, H., Yu, K. J., Lee, J. W., Kim, J.-H., Kang, S.-K., et al. (2015) · Nano Letters · doi:10.1021/nl503779e · Cited by 444
Nanofocusing of electromagnetic radiation
Gramotnev, D. K., & Bozhevolnyi, S. I. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.232 · Cited by 374
Takei, Y. G., Aoki, T., Sanui, K., Ogata, N., Sakurai, Y., & Okano, T. (1994) · Macromolecules · doi:10.1021/ma00099a035 · Cited by 345
Gates, B. D. (2009) · Science · doi:10.1126/science.1171230 · Cited by 284
Patterning Multicolored Microdisk Laser Arrays of Cesium Lead Halide Perovskite
He, X., Liu, P., Zhang, H., Liao, Q., Yao, J., & Fu, H. (2017) · Advanced Materials · doi:10.1002/adma.201604510 · Cited by 232
Colloidal Quantum Nanostructures: Emerging Materials for Display Applications
Panfil, Y. E., Oded, M., & Banin, U. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201708510 · Cited by 226
In Situ Fabricated Perovskite Nanocrystals: A Revolution in Optical Materials
Chang, S., Bai, Z., & Zhong, H. (2018) · Advanced Optical Materials · doi:10.1002/adom.201800380 · Cited by 213
Self-citationMicro Light‐Emitting Diodes for Display and Flexible Biomedical Applications
Lee, H. E., Shin, J. H., Park, J. H., Hong, S. K., Park, S. H., Lee, S. H., Lee, J. H., Kang, I., & Lee, K. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808075 · Cited by 207
High‐Resolution Spin‐on‐Patterning of Perovskite Thin Films for a Multiplexed Image Sensor Array
Lee, W., Lee, J., Yun, H., Kim, J., Park, J., Choi, C., Kim, D. C., Seo, H., Lee, H., Yu, J. W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201702902 · Cited by 204
Introduction: Nanoparticle Chemistry
Talapin, D. V., & Shevchenko, E. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00566 · Cited by 171
Chen, B., Pradhan, N., & Zhong, H. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b03037 · Cited by 167
Self-citationHybrid remote quantum dot/powder phosphor designs for display backlights
Abe, S., Joos, J. J., Martin, L. I., Hens, Z., & Smet, P. F. (2016) · Light: Science & Applications · doi:10.1038/lsa.2016.271 · Cited by 161
Liu, Y., Li, F., Qiu, L., Yang, K., Li, Q., Zheng, X. H., Hu, H., Guo, T., Wu, C., & Kim, T. W. (2019) · ACS Nano · doi:10.1021/acsnano.8b08582 · Cited by 145
Self-citationLarge‐Area Lasing and Multicolor Perovskite Quantum Dot Patterns
Lin, C. H., Zeng, Q., Lafalce, E., Yu, S., Smith, M. J., Yoon, Y. J., Chang, Y., Jiang, Y., Lin, Z., Vardeny, Z. V., et al. (2018) · Advanced Optical Materials · doi:10.1002/adom.201800474 · Cited by 124
Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology
Towne, S. A., Viswanathan, V. V., Holbery, J. D., & Rieke, P. C. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.017 · Cited by 114
Colloidal-Quantum-Dot Ring Lasers with Active Color Control
le Feber, B., Prins, F., Leo, E. D., Rabouw, F. T., & Norris, D. J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b04495 · Cited by 93
Simple and Fast Patterning Process by Laser Direct Writing for Perovskite Quantum Dots
Chen, J., Wu, Y., Li, X., Cao, F., Gu, Y., Liu, K., Liu, X., Dong, Y., Ji, J., & Zeng, H. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700132 · Cited by 87
In situ synthesis and macroscale alignment of CsPbBr 3 perovskite nanorods in a polymer matrix
He, J., Towers, A., Wang, Y., Yuan, P., Jiang, Z., Chen, J., Gesquiere, A. J., Wu, S.-T. T., & Dong, Y. (2018) · Nanoscale · doi:10.1039/c8nr04895a · Cited by 86
Advances and prospects of lasers developed from colloidal semiconductor nanostructures
Wang, Y., & Sun, H. (2018) · Progress in Quantum Electronics · doi:10.1016/j.pquantelec.2018.05.002 · Cited by 61
Composite Structures with Emissive Quantum Dots for Light Enhancement
Smith, M. J., Lin, C. H., Yu, S., & Tsukruk, V. V. (2018) · Advanced Optical Materials · doi:10.1002/adom.201801072 · Cited by 47
Perovskite Nanoparticle Composite Films by Size Exclusion Lithography
Minh, D. N., Eom, S., Nguyen, L. A. T., Kim, J., Sim, J. H., Seo, C., Nam, J., Lee, S., Suk, S., Kim, J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201802555 · Cited by 33
Schneider, J., Dudka, T., Xiong, Y., Wang, Z., Gaponik, N. P., & Rogach, A. L. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b11027 · Cited by 13
Cited by
Fang, M.-H., Bao, Z., Huang, W.-T., & Liu, R.-S. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00952 · Cited by 563
Three-dimensional direct lithography of stable perovskite nanocrystals in glass
Sun, K., Tan, D., Fang, X., Xia, X., Lin, D., Song, J., Lin, Y., Liu, Z., Gu, M., Yue, Y., et al. (2022) · Science · doi:10.1126/science.abj2691 · Cited by 498
Perovskite solar cells based on screen-printed thin films
Chen, C., Chen, J., Han, H., Chao, L., Hu, J., Niu, T., Dong, H., Yang, S., Xia, Y., Chen, Y., et al. (2022) · Nature · doi:10.1038/s41586-022-05346-0 · Cited by 290
Wei, C., Su, W., Li, J., Xu, B., Shan, Q., Wu, Y., Zhang, F., Luo, M., Xiang, H., Cui, Z., et al. (2022) · Advanced Materials · doi:10.1002/adma.202107798 · Cited by 284
In Situ Patterning Perovskite Quantum Dots by Direct Laser Writing Fabrication
Zhan, W., Meng, L., Shao, C., Wu, X.-G., Shi, K., & Zhong, H. (2021) · ACS Photonics · doi:10.1021/acsphotonics.1c00118 · Cited by 111
Self-citation
Metadata
- Authors
- Shi, L., Meng, L., Jiang, F., Ge, Y., Li, F., Wu, X., & Zhong, H.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-07-11
- Volume
- 29
- Issue
- 37
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2960218279
- Cited by
- 255
- References
- 36
- FWCI
- 9.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.