The DOI matches its Crossref record; 162 of the 162 references it cites were found in a registry or an index.
The Next Frontier in Melt Electrospinning: Taming the Jet
Open accessAbstract
There is a specialized niche for the electrohydrodynamic jetting of melts, from biomedical products to filtration and soft matter applications. The next frontier includes optics, microfluidics, flexible electronic devices, and soft network composites in biomaterial science and soft robotics. The recent emphasis on reproducibly direct‐writing continual molten jets has enabled a spectrum of contemporary microscale 3D objects to be fabricated. One strong suit of melt processing is the capacity for the jet to solidify rapidly into a fiber, thus fixing a particular structure into position. The ability to direct‐write complex and multiscaled architectures and structures has greatly contributed to a large number of recent studies, explicitly, toward fiber–hydrogel composites and fugitive inks, and has expanded into several biomedical applications such as cartilage, skin, periosteum, and cardiovascular tissue engineering. Following the footsteps of a publication that summarized melt electrowriting literature up to 2015, the most recent literature from then until now is reviewed to provide a continuous and comprehensive timeline that demonstrates the latest advances as well as new perspectives for this emerging technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications
Martins, P., Lopes, A. C., & Lanceros-Mendez, S. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.006 · Cited by 3,494
Drug delivery systems: An updated review
Tiwari, G., Tiwari, R., Bannerjee, S., Bhati, L., Pandey, S., Pandey, P., & Sriwastawa, B. (2012) · International Journal of Pharmaceutical Investigation · doi:10.4103/2230-973x.96920 · Cited by 1,671
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Conductive Fiber‐Based Ultrasensitive Textile Pressure Sensor for Wearable Electronics
Lee, J., Kwon, H., Seo, J., Shin, S., Koo, J. H., Pang, C., Son, S., Kim, J. H., Jang, Y. H., Kim, D. E., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500009 · Cited by 1,152
Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review
Yu, X., Zhou, J., Liang, H., Jiang, Z., & Wu, L. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.003 · Cited by 1,140
A review of piezoelectric polymers as functional materials for electromechanical transducers
Ramadan, K. S., Sameoto, D., & Evoy, S. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/3/033001 · Cited by 1,060
Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes
Xing, P., Robertson, G. P., Guiver, M. D., Mikhailenko, S. D., Wang, K., & Kaliaguine, S. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.09.019 · Cited by 1,007
Metadata
- Authors
- Robinson, T. M., Hutmacher, D. W., & Dalton, P. D.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-08-18
- Volume
- 29
- Issue
- 44
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2969373676
- Cited by
- 267
- References
- 162
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Next Frontier in Melt Electrospinning: Taming the Jet. https://app.cochat.ai/papers/10.1002/adfm.201904664
- The paper
- Robinson, T. M., Hutmacher, D. W., & Dalton, P. D. (2019). The Next Frontier in Melt Electrospinning: Taming the Jet. Advanced Functional Materials. https://doi.org/10.1002/adfm.201904664
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
