The DOI matches its Crossref record; 162 of the 162 references it cites were found in a registry or an index.
The Next Frontier in Melt Electrospinning: Taming the Jet
Open accessAbstract
There is a specialized niche for the electrohydrodynamic jetting of melts, from biomedical products to filtration and soft matter applications. The next frontier includes optics, microfluidics, flexible electronic devices, and soft network composites in biomaterial science and soft robotics. The recent emphasis on reproducibly direct‐writing continual molten jets has enabled a spectrum of contemporary microscale 3D objects to be fabricated. One strong suit of melt processing is the capacity for the jet to solidify rapidly into a fiber, thus fixing a particular structure into position. The ability to direct‐write complex and multiscaled architectures and structures has greatly contributed to a large number of recent studies, explicitly, toward fiber–hydrogel composites and fugitive inks, and has expanded into several biomedical applications such as cartilage, skin, periosteum, and cardiovascular tissue engineering. Following the footsteps of a publication that summarized melt electrowriting literature up to 2015, the most recent literature from then until now is reviewed to provide a continuous and comprehensive timeline that demonstrates the latest advances as well as new perspectives for this emerging technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications
Martins, P., Lopes, A. C., & Lanceros-Mendez, S. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.006 · Cited by 3,494
Drug delivery systems: An updated review
Tiwari, G., Tiwari, R., Bannerjee, S., Bhati, L., Pandey, S., Pandey, P., & Sriwastawa, B. (2012) · International Journal of Pharmaceutical Investigation · doi:10.4103/2230-973x.96920 · Cited by 1,671
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Conductive Fiber‐Based Ultrasensitive Textile Pressure Sensor for Wearable Electronics
Lee, J., Kwon, H., Seo, J., Shin, S., Koo, J. H., Pang, C., Son, S., Kim, J. H., Jang, Y. H., Kim, D. E., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500009 · Cited by 1,152
Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review
Yu, X., Zhou, J., Liang, H., Jiang, Z., & Wu, L. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.003 · Cited by 1,140
A review of piezoelectric polymers as functional materials for electromechanical transducers
Ramadan, K. S., Sameoto, D., & Evoy, S. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/3/033001 · Cited by 1,060
Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes
Xing, P., Robertson, G. P., Guiver, M. D., Mikhailenko, S. D., Wang, K., & Kaliaguine, S. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.09.019 · Cited by 1,007
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Self-citationDegradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment
Bartnikowski, M., Dargaville, T. R., Ivanovski, S., & Hutmacher, D. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.05.004 · Cited by 769
Self-citationBiofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationReinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Self-citationElectrospinning versus fibre production methods: from specifics to technological convergence
Luo, C. J., Stoyanov, S. D., Stride, E., Pelan, E., & Edirisinghe, M. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35083a · Cited by 691
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
How smart do biomaterials need to be? A translational science and clinical point of view
Holzapfel, B. M., Reichert, J. C., Schantz, J.-T., Gbureck, U., Rackwitz, L., Nöth, U., Jakob, F., Rudert, M., Groll, J., & Hutmacher, D. W. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.07.009 · Cited by 552
Self-citationMelt electrospinning today: An opportune time for an emerging polymer process
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.01.001 · Cited by 542
Self-citationGale, B. K., Jafek, A. R., Lambert, C. J., Goenner, B. L., Moghimifam, H., Nze, U. C., & Kamarapu, S. K. (2018) · Inventions · doi:10.3390/inventions3030060 · Cited by 511
Life is 3D: Boosting Spheroid Function for Tissue Engineering
Laschke, M. W., & Menger, M. D. (2017) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.08.004 · Cited by 438
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Gil, M., Ji, X., Li, X., Na, H., Eric Hampsey, J., & Lu, Y. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.12.021 · Cited by 421
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Hochleitner, G., Jüngst, T., Brown, T. D., Hahn, K., Moseke, C., Jakob, F., Dalton, P. D., & Groll, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035002 · Cited by 385
Self-citationGreen Electrospun Nanofibers and Their Application in Air Filtration
Lv, D., Zhu, M., Jiang, Z., Jiang, S., Zhang, Q., Xiong, R., & Huang, C. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800336 · Cited by 375
Applications of Polymer Nanofibers in Biomedicine and Biotechnology
Venugopal, J., & Ramakrishna, S. (2005) · Applied Biochemistry and Biotechnology · doi:10.1385/abab:125:3:147 · Cited by 370
Soft‐Matter Engineering for Soft Robotics
Majidi, C. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800477 · Cited by 358
Needleless Melt‐Electrospinning of Polypropylene Nanofibres
Fang, J., Zhang, L., Sutton, D., Wang, X., & Lin, T. (2012) · Journal of Nanomaterials · doi:10.1155/2012/382639 · Cited by 334
Animal models for bone tissue engineering and modelling disease
McGovern, J. A., Griffin, M., & Hutmacher, D. W. (2018) · Disease Models & Mechanisms · doi:10.1242/dmm.033084 · Cited by 304
Self-citationMelt Electrospinning Writing of Highly Ordered Large Volume Scaffold Architectures
Wunner, F. M., Wille, M., Noonan, T. G., Bas, O., Dalton, P. D., De‐Juan‐Pardo, E. M., & Hutmacher, D. W. (2018) · Advanced Materials · doi:10.1002/adma.201706570 · Cited by 260
Self-citationElectrohydrodynamic direct-writing
Huang, Y., Bu, N., Duan, Y., Pan, Y., Liu, H., Yin, Z., & Xiong, Y. (2013) · Nanoscale · doi:10.1039/c3nr04329k · Cited by 258
Dimension‐Based Design of Melt Electrowritten Scaffolds
Hrynevich, A., Elçi, B. Ş., Haigh, J. N., McMaster, R., Youssef, A., Blum, C., Blunk, T., Hochleitner, G., Groll, J., & Dalton, P. D. (2018) · Small · doi:10.1002/smll.201800232 · Cited by 248
Self-citationIn vitro degradation of a novel poly(lactide-co-glycolide) 75/25 foam
Holy, C. E., Dang, S. M., Davies, J. E., & Shoichet, M. S. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00256-7 · Cited by 241
Melt electrowriting with additive manufacturing principles
Dalton, P. D. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.05.007 · Cited by 237
Self-citationAgarwal, S., & Greiner, A. (2011) · Polymers for Advanced Technologies · doi:10.1002/pat.1883 · Cited by 216
Examination of the foreign body response to biomaterials by nonlinear intravital microscopy
Dondossola, E., Holzapfel, B. M., Alexander, S., Filippini, S., Hutmacher, D. W., & Friedl, P. (2016) · Nature Biomedical Engineering · doi:10.1038/s41551-016-0007 · Cited by 215
Self-citationBiologically Inspired Scaffolds for Heart Valve Tissue Engineering via Melt Electrowriting
Saidy, N. T., Wolf, F., Bas, O., Keijdener, H., Hutmacher, D. W., Mela, P., & De‐Juan‐Pardo, E. M. (2019) · Small · doi:10.1002/smll.201900873 · Cited by 215
Self-citationMauck, R. L., Baker, B. M., Nerurkar, N. L., Burdick, J. A., Li, W.-J., Tuan, R. S., & Elliott, D. M. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2008.0652 · Cited by 213
Castilho, M., van Mil, A., Maher, M., Metz, C. H. G., Hochleitner, G., Groll, J., Doevendans, P. A., Ito, K., Sluijter, J. P. G., & Malda, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803151 · Cited by 208
Farrugia, B. L., Brown, T. D., Upton, Z., Hutmacher, D. W., Dalton, P. D., & Dargaville, T. R. (2013) · Biofabrication · doi:10.1088/1758-5082/5/2/025001 · Cited by 201
Self-citationFrega, M., Tedesco, M., Massobrio, P., Pesce, M., & Martinoia, S. (2014) · Scientific Reports · doi:10.1038/srep05489 · Cited by 197
Additive manufacturing of polymer melts for implantable medical devices and scaffolds
Youssef, A., Hollister, S. J., & Dalton, P. D. (2017) · Biofabrication · doi:10.1088/1758-5090/aa5766 · Cited by 190
Self-citationBiofabricated soft network composites for cartilage tissue engineering
Bas, O., De-Juan-Pardo, E. M., Meinert, C., D’Angella, D., Baldwin, J. G., Bray, L. J., Wellard, R. M., Kollmannsberger, S., Rank, E., Werner, C., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6b15 · Cited by 188
Self-citationNanofibers from gas-assisted polymer melt electrospinning
Zhmayev, E., Cho, D., & Joo, Y. L. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.058 · Cited by 186
Automated 3D bioassembly of micro-tissues for biofabrication of hybrid tissue engineered constructs
Mekhileri, N. V., Lim, K. S., Brown, G. C. J., Mutreja, I., Schon, B. S., Hooper, G. J., & Woodfield, T. B. F. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9ef1 · Cited by 185
Fibre pulsing during melt electrospinning writing
Hochleitner, G., Youssef, A., Hrynevich, A., Haigh, J. N., Jungst, T., Groll, J., & Dalton, P. D. (2016) · BioNanoMaterials · doi:10.1515/bnm-2015-0022 · Cited by 177
Self-citationMicro/nanoscale electrohydrodynamic printing: from 2D to 3D
Zhang, B., He, J., Li, X., Xu, F., & Li, D. (2016) · Nanoscale · doi:10.1039/c6nr04106j · Cited by 172
Brown, T. D., Edin, F., Detta, N., Skelton, A. D., Hutmacher, D. W., & Dalton, P. D. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.07.034 · Cited by 170
Self-citationLarge‐Scale Direct‐Writing of Aligned Nanofibers for Flexible Electronics
Ye, D., Ding, Y., Duan, Y., Su, J., Yin, Z., & Huang, Y. A. (2018) · Small · doi:10.1002/smll.201703521 · Cited by 170
Castilho, M., Hochleitner, G., Wilson, W., van Rietbergen, B., Dalton, P. D., Groll, J., Malda, J., & Ito, K. (2018) · Scientific Reports · doi:10.1038/s41598-018-19502-y · Cited by 169
Self-citationde Ruijter, M., Ribeiro, A., Dokter, I., Castilho, M. D., & Malda, J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800418 · Cited by 159
Drug-releasing implants: current progress, challenges and perspectives
Santos, A., Sinn Aw, M., Bariana, M., Kumeria, T., Wang, Y., & Losic, D. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb00548a · Cited by 158
Poly(lactide) nanofibers produced by a melt‐electrospinning system with a laser melting device
Ogata, N., Yamaguchi, S., Shimada, N., Lu, G., Iwata, T., Nakane, K., & Ogihara, T. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25782 · Cited by 151
Chala, T. F., Wu, C., Chou, M.-H., & Guo, Z.-L. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07434 · Cited by 149
Hochleitner, G., Chen, F., Blum, C., Dalton, P. D., Amsden, B. G., & Gröll, J. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.023 · Cited by 146
Self-citationEichholz, K. F., & Hoey, D. A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.048 · Cited by 142
Nagy, Z. K., Balogh, A., Drávavölgyi, G., Ferguson, J. W., Pataki, H., Vajna, B., & Marosi, G. (2012) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.23374 · Cited by 140
A tissue-engineered humanized xenograft model of human breast cancer metastasis to bone
Thibaudeau, L., Taubenberger, A. V., Holzapfel, B. M., Quent, V. M. C., Führmann, T., Hesami, P., Brown, T. D., Dalton, P. D., Power, C. A., Hollier, B. G., et al. (2014) · Disease Models & Mechanisms · doi:10.1242/dmm.014076 · Cited by 136
Self-citationBas, O., De‐Juan‐Pardo, E. M., Chhaya, M. P., Wunner, F. M., Jeon, J. E., Klein, T. J., & Hutmacher, D. W. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.034 · Cited by 135
Self-citationKotz, F., Risch, P., Arnold, K., Sevim, S., Puigmartí‐Luis, J., Quick, A. S., Thiel, M., Hrynevich, A., Dalton, P. D., Helmer, D., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09497-z · Cited by 135
Self-citation3D printing strategies for peripheral nerve regeneration
Petcu, E. B., Midha, R., McColl, E., Popa‐Wagner, A., Chirilă, T. V., & Dalton, P. D. (2018) · Biofabrication · doi:10.1088/1758-5090/aaaf50 · Cited by 127
Self-citationEngineering a humanized bone organ model in mice to study bone metastases
Martine, L. C., Holzapfel, B. M., McGovern, J., Wagner, F., Quent, V. M. C., Hesami, P., Wunner, F. M., Vaquette, C., De‐Juan‐Pardo, E. M., Brown, T. D., et al. (2017) · Nature Protocols · doi:10.1038/nprot.2017.002 · Cited by 123
Self-citationPeriosteum tissue engineering in an orthotopic in vivo platform
Baldwin, J., Wagner, F., Martine, L. C., Holzapfel, B. M., Theodoropoulos, C., Bas, O., Savi, F. M., Werner, C., De‐Juan‐Pardo, E. M., & Hutmacher, D. W. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.016 · Cited by 115
Self-citationChen, F., Hochleitner, G., Woodfield, T. B. F., Gröll, J., Dalton, P. D., & Amsden, B. G. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b01316 · Cited by 114
Self-citationRecent advances in melt electrospinning
Zhang, L., Duan, X.-P., Yan, X., Yu, M., Ning, X., Zhao, Y. S., & Long, Y. (2016) · RSC Advances · doi:10.1039/c6ra09558e · Cited by 114
Abbasi, N., Abdal‐hay, A., Hamlet, S. M., Graham, E. Y., & Ivanovski, S. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01456 · Cited by 113
Bas, O., D’Angella, D., Baldwin, J., Castro, N. J., Wunner, F. M., Saidy, N. T., Kollmannsberger, S., Reali, A., Rank, E., De‐Juan‐Pardo, E. M., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08617 · Cited by 112
Self-citationContact guidance induced organization of extracellular matrix
Manwaring, M. E., Walsh, J. F., & Tresco, P. A. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.043 · Cited by 110
Scaffold Design and Fabrication
Hutmacher, D. W., Woodfield, T. B. F., & Dalton, P. D. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-420145-3.00010-9 · Cited by 107
Self-citationLi, H., Wu, W., Bubakir, M. M., Chen, H., Zhong, X., Liu, Z., Ding, Y., & Yang, W. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40080 · Cited by 105
Additive manufacturing with polypropylene microfibers
Haigh, J. N., Dargaville, T. R., & Dalton, P. D. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.286 · Cited by 104
Self-citationDesign and fabrication of melt electrowritten tubes using intuitive software
McColl, E., Gröll, J., Jüngst, T., & Dalton, P. D. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.036 · Cited by 99
Self-citationPrintomics: the high-throughput analysis of printing parameters applied to melt electrowriting
Wunner, F. M., Mieszczanek, P., Bas, O., Eggert, S., Maartens, J. H., Dalton, P. D., De‐Juan‐Pardo, E. M., & Hutmacher, D. W. (2019) · Biofabrication · doi:10.1088/1758-5090/aafc41 · Cited by 99
Self-citationTourlomousis, F., Jia, C., Karydis, T., Mershin, A., Wang, H., Kalyon, D. M., & Chang, R. C. (2019) · Microsystems & Nanoengineering · doi:10.1038/s41378-019-0055-4 · Cited by 99
Jüngst, T., Muerza-Cascante, M. L., Brown, T. D., Standfest, M., Hutmacher, D. W., Gröll, J., & Dalton, P. D. (2015) · Polymer International · doi:10.1002/pi.4948 · Cited by 95
Self-citationModeling of melt electrospinning for semi-crystalline polymers
Zhmayev, E., Cho, D., & Joo, Y. L. (2009) · Polymer · doi:10.1016/j.polymer.2009.11.025 · Cited by 93
Abdal‐hay, A., Abbasi, N., Gwiazda, M., Hamlet, S. M., & Ivanovski, S. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.05.034 · Cited by 93
Out‐of‐Plane 3D‐Printed Microfibers Improve the Shear Properties of Hydrogel Composites
de Ruijter, M., Hrynevich, A., Haigh, J. N., Hochleitner, G., Castilho, M. D., Gröll, J., Malda, J., & Dalton, P. D. (2017) · Small · doi:10.1002/smll.201702773 · Cited by 91
Self-citationPark, W. H., Kim, B., Park, K. E., You, H. K., Lee, J., & Kim, M. H. (2015) · International Journal of Nanomedicine · doi:10.2147/ijn.s72730 · Cited by 89
Properties of high modulus PEEK yarns for aerospace applications
Shekar, R. I., Kotresh, T. M., Rao, P. M. D., & Kumar, K. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29765 · Cited by 88
Bas, O., Lucarotti, S., D’Angella, D., Castro, N. J., Meinert, C., Wunner, F. M., Rank, E., Vozzi, G., Klein, T. J., Catelas, I., et al. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.020 · Cited by 86
Self-citationRational Design of Mouse Models for Cancer Research
Landgraf, M., McGovern, J., Friedl, P., & Hutmacher, D. W. (2018) · Trends in biotechnology · doi:10.1016/j.tibtech.2017.12.001 · Cited by 85
Self-citationRistovski, N., Bock, N., Liao, S., Powell, S. K., Ren, J., Kirby, G. T. S., Blackwood, K. A., & Woodruff, M. A. (2015) · Biointerphases · doi:10.1116/1.4914380 · Cited by 84
A Fundamental Study of Charge Effects on Melt Electrowritten Polymer Fibers
Ding, H., Cao, K., Zhang, F., Boettcher, W., & Chang, R. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107857 · Cited by 83
Wu, S., Peng, H., Li, X., Streubel, P. N., Liu, Y., & Duan, B. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8fb8 · Cited by 80
Modeling 3D melt electrospinning writing by response surface methodology
Dayan, C. B., Afghah, F., Okan, B. S., Yıldız, M., Menceloǵlu, Y. Z., Çulha, M., & Koç, B. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.053 · Cited by 80
Melt Electrowriting of Thermoplastic Elastomers
Hochleitner, G., Fürsattel, E., Giesa, R., Gröll, J., Schmidt, H., & Dalton, P. D. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800055 · Cited by 79
Self-citationHe, J., Xia, P., & Li, D. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035008 · Cited by 78
Yuan, H., Qin, J., Xie, J., Li, B., Yu, Z., Peng, Z., Yi, B., Lou, X., Lu, X., & Zhang, Y. (2016) · Nanoscale · doi:10.1039/c6nr05075a · Cited by 78
Endosteal-like extracellular matrix expression on melt electrospun written scaffolds
Muerza-Cascante, M. L., Shokoohmand, A., Khosrotehrani, K., Haylock, D. N., Dalton, P. D., Hutmacher, D. W., & Loessner, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.040 · Cited by 78
Self-citation3D Jet Writing: Functional Microtissues Based on Tessellated Scaffold Architectures
Jordahl, J. H., Solorio, L., Sun, H., Ramcharan, S., Teeple, C. B., Haley, H. R., Lee, K. J., Eyster, T. W., Luker, G. D., Krebsbach, P. H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707196 · Cited by 77
Meandering instability of a viscous thread
Morris, S. W., Dawes, J., Ribe, N. M., & Lister, J. R. (2008) · Physical Review E · doi:10.1103/physreve.77.066218 · Cited by 76
Qin, C.-C., Duan, X.-P., Wang, L., Zhang, L., Yu, M., Dong, R., Yan, X., He, H., & Long, Y. (2015) · Nanoscale · doi:10.1039/c5nr05367f · Cited by 76
Melt electrowriting of electroactive poly(vinylidene difluoride) fibers
Florczak, S., Lorson, T., Zheng, T., Mrlík, M., Hutmacher, D. W., Higgins, M. J., Luxenhofer, R., & Dalton, P. D. (2018) · Polymer International · doi:10.1002/pi.5759 · Cited by 76
Self-citationPoly(ε-caprolactone) Scaffolds Fabricated by Melt Electrospinning for Bone Tissue Engineering
Zaiss, S., Brown, T. D., Reichert, J. C., & Berner, A. (2016) · Materials · doi:10.3390/ma9040232 · Cited by 75
Davachi, S. M., Heidari, B. S., Hejazi, I., Seyfi, J., Oliaei, E., Farzaneh, A., & Rashedi, H. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.08.037 · Cited by 75
Mohtaram, N. K., Ko, J., King, C., Sun, L., Muller, N. J., Jun, M. B., & Willerth, S. M. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35392 · Cited by 73
Design and fabrication of auxetic stretchable force sensor for hand rehabilitation
Ko, J., Bhullar, S. K., Cho, Y. H., Lee, P. C., & Jun, M. B. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/7/075027 · Cited by 71
Kumar, P., Hashimi, S. M., Saifzadeh, S., Ivanovski, S., & Vaquette, C. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.06.071 · Cited by 71
Melt Electrospinning Writing Process Guided by a “Printability Number”
Tourlomousis, F., Ding, H., Kalyon, D. M., & Chang, R. C. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036348 · Cited by 70
Fuchs, A. R., Youssef, A., Seher, A., Hochleitner, G., Dalton, P. D., Hartmann, S., Brands, R. C., Müller-Richter, U. D. A., & Linz, C. (2019) · BMC Oral Health · doi:10.1186/s12903-019-0717-5 · Cited by 68
Self-citationKoenig, K., Beukenberg, K., Langensiepen, F., & Seide, G. H. (2019) · Biomaterials Research · doi:10.1186/s40824-019-0159-9 · Cited by 66
Melt electrospinning: Electrodynamics and spinnability
Xu, H., Yamamoto, M., & Yamane, H. (2017) · Polymer · doi:10.1016/j.polymer.2017.11.006 · Cited by 65
McMaster, R., Hoefner, C., Hrynevich, A., Blum, C., Wiesner, M., Wittmann, K., Dargaville, T. R., Bauer‐Kreisel, P., Gröll, J., Dalton, P. D., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801326 · Cited by 65
Self-citationPaxton, N. C., Ren, J., Ainsworth, M. J., Solanki, A. K., Jones, J. R., Allenby, M. C., Stevens, M. M., & Woodruff, M. A. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900019 · Cited by 63
Beaulieu, M. R., Hendricks, N. R., & Watkins, J. J. (2014) · ACS Photonics · doi:10.1021/ph500078f · Cited by 61
The Impact of Melt Electrowritten Scaffold Design on Porosity Determined by X-Ray Microtomography
Youssef, A., Hrynevich, A., Fladeland, L., Balles, A., Gröll, J., Dalton, P. D., & Zabler, S. (2019) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2018.0373 · Cited by 61
Self-citationHochleitner, G., Keßler, M., Schmitz, M., Boccaccini, A. R., Teßmar, J., & Gröll, J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.06.096 · Cited by 60
Bertlein, S., Hikimoto, D., Hochleitner, G., Hümmer, J., Jüngst, T., Matsusaki, M., Akashi, M., & Gröll, J. (2017) · Small · doi:10.1002/smll.201701521 · Cited by 60
PLLA-PHB fiber membranes obtained by solvent-free electrospinning for short-time drug delivery
Cao, K., Liu, Y., Olkhov, A. A., Siracusa, V., & Иорданский, А. Л. (2017) · Drug Delivery and Translational Research · doi:10.1007/s13346-017-0463-7 · Cited by 60
Intravital microscopy of osteolytic progression and therapy response of cancer lesions in the bone
Dondossola, E., Alexander, S., Holzapfel, B. M., Filippini, S., Starbuck, M. W., Hoffman, R. M., Navone, N. M., De‐Juan‐Pardo, E. M., Logothetis, C. J., Hutmacher, D. W., et al. (2018) · Science Translational Medicine · doi:10.1126/scitranslmed.aao5726 · Cited by 60
Self-citationPereira, B., Lister, N. L., Hashimoto, K., Teng, L., Flandes‐Iparraguirre, M., Eder, A., Sánchez‐Herrero, A., Niranjan, B., Frydenberg, M., Papargiris, M., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.030 · Cited by 56
Self-citationA 3D tumor microenvironment regulates cell proliferation, peritoneal growth and expression patterns
Loessner, D., Rockstroh, A., Shokoohmand, A., Holzapfel, B. M., Wagner, F., Baldwin, J., Boxberg, M., Schmalfeldt, B., Lengyel, E. R., Clements, J. A., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.10.014 · Cited by 55
Self-citationHe, F., Deng, X., Zhou, Y., Zhang, T., Liu, Y., Ye, Y., & Yin, D. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4481 · Cited by 55
The effect of decellularized tissue engineered constructs on periodontal regeneration
Farag, A., Hashimi, S. M., Vaquette, C., Bartold, P. M., Hutmacher, D. W., & Ivanovski, S. (2018) · Journal Of Clinical Periodontology · doi:10.1111/jcpe.12886 · Cited by 53
Self-citationWunner, F. M., Eggert, S., Maartens, J. H., Bas, O., Dalton, P. D., De‐Juan‐Pardo, E. M., & Hutmacher, D. W. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0149 · Cited by 53
Self-citationIdentification of sagging in melt-electrospinning of microfiber scaffolds
Nguyen, N. T., Kim, J. H., & Jeong, Y. H. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109785 · Cited by 53
Thibaudeau, L., Quent, V. M. C., Holzapfel, B. M., Taubenberger, A. V., Straub, M., & Hutmacher, D. W. (2014) · Cancer and Metastasis Reviews · doi:10.1007/s10555-014-9499-z · Cited by 52
Self-citationWeigand, A., Boos, A. M., Tasbihi, K., Beier, J. P., Dalton, P. D., Schrauder, M. G., Horch, R. E., Beckmann, M. W., Strissel, P. L., & Strick, R. (2016) · Breast Cancer Research · doi:10.1186/s13058-016-0688-2 · Cited by 52
Self-citationNeural interactions with materials
Dalton, P. D., & Mey, J. (2009) · Frontiers in bioscience · doi:10.2741/3277 · Cited by 49
Self-citationLian, H., & Meng, Z. (2017) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.03.003 · Cited by 47
Hierarchically Structured Porous Poly(2‐oxazoline) Hydrogels
Haigh, J. N., Chuang, Y., Farrugia, B. L., Hoogenboom, R., Dalton, P. D., & Dargaville, T. R. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500495 · Cited by 46
Self-citationLycopene reduces ovarian tumor growth and intraperitoneal metastatic load.
Holzapfel, N. P., Shokoohmand, A., Wagner, F., Landgraf, M., Champ, S., Holzapfel, B. M., Clements, J. A., Hutmacher, D. W., & Loessner, D. (2017) · PubMed Central · Cited by 46
Self-citationWagner, F., Holzapfel, B. M., McGovern, J., Shafiee, A., Baldwin, J., Martine, L. C., Lahr, C. A., Wunner, F. M., Friis, T., Bas, O., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.04.030 · Cited by 46
Self-citationBock, N., Shokoohmand, A., Kryza, T., Röhl, J., Meijer, J., Tran, P. A., Nelson, C. C., Clements, J. A., & Hutmacher, D. W. (2019) · Bone Research · doi:10.1038/s41413-019-0049-8 · Cited by 46
Self-citationMineralization capacity of Runx2/Cbfa1-genetically engineered fibroblasts is scaffold dependent
Phillips‐Cremins, J. E., Hutmacher, D. W., Guldberg, R. E., & García, A. J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.019 · Cited by 45
Self-citationYan, X., Yu, M., Zhang, L., Jia, X.-S., Li, J., Duan, X.-P., Qin, C.-C., Dong, R., & Long, Y. (2015) · Nanoscale · doi:10.1039/c5nr06858d · Cited by 44
3D printed lattices as an activation and expansion platform for T cell therapy
Delalat, B., Harding, F. J., Gundsambuu, B., De‐Juan‐Pardo, E. M., Wunner, F. M., Wille, M., Jasieniak, M., Malatesta, K. A. L., Griesser, H. J., Simula, A., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.05.009 · Cited by 44
Self-citationThe effects of processing parameters on the morphology of PLA/PEG melt electrospun fibers
Nazari, T., & Garmabi, H. (2017) · Polymer International · doi:10.1002/pi.5486 · Cited by 42
New PEEK-WC and PLA membranes for H2 separation
Iulianelli, A., Algieri, C., Donato, L., Garofalo, A., Galiano, F., Bagnato, G., Basile, A., & Figoli, A. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.04.060 · Cited by 41
Shafiee, A., McGovern, J., Lahr, C. A., Meinert, C., Moi, D., Wagner, F., Landgraf, M., De‐Juan‐Pardo, E. M., Mazzieri, R., & Hutmacher, D. W. (2018) · International Journal of Cancer · doi:10.1002/ijc.31528 · Cited by 41
Self-citationRegeneration of cellulose dissolved in ionic liquid using laser-heated melt-electrospinning
Xu, H., Bronner, T., Yamamoto, M., & Yamane, H. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.08.062 · Cited by 39
Chen, J.-F. (2017) · Engineering · doi:10.1016/j.eng.2017.03.025 · Cited by 38
Farag, A., Hashimi, S. M., Vaquette, C., Volpato, F. Z., Hutmacher, D. W., & Ivanovski, S. (2018) · Archives of Oral Biology · doi:10.1016/j.archoralbio.2018.01.014 · Cited by 38
Self-citationFabrication of Ultrafine PPS Fibers with High Strength and Tenacity via Melt Electrospinning
Fan, Z., He, H., Yan, X., Zhao, R., Long, Y., & Ning, X. (2019) · Polymers · doi:10.3390/polym11030530 · Cited by 35
3D Electrophysiological Measurements on Cells Embedded within Fiber‐Reinforced Matrigel
Schaefer, N., Janzen, D., Bakırcı, E., Hrynevich, A., Dalton, P. D., & Villmann, C. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801226 · Cited by 33
Self-citationHammerl, A., Cano, C., De‐Juan‐Pardo, E. M., van Griensven, M., & Poh, P. S. P. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20051068 · Cited by 33
Fabrication of Designable and Suspended Microfibers via Low-Voltage 3D Micropatterning
Gill, E., Willis, S., Gerigk, M., Cohen, P., Zhang, D., Li, X., & Huang, Y. Y. S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b01258 · Cited by 33
Permanent Hydrophilization and Generic Bioactivation of Melt Electrowritten Scaffolds
Bertlein, S., Hochleitner, G., Schmitz, M., Teßmar, J., Raghunath, M., Dalton, P. D., & Gröll, J. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801544 · Cited by 32
Self-citationMelt electrospinning process optimization of polylactic acid nanofibers
Doustgani, A., & Ahmadi, E. (2015) · Journal of Industrial Textiles · doi:10.1177/1528083715610297 · Cited by 31
Asai, H., Kikuchi, M., Shimada, N., & Nakane, K. (2017) · RSC Advances · doi:10.1039/c7ra01299c · Cited by 31
Fabrication of microfluidic channels based on melt-electrospinning direct writing
Zeng, J. J., Wang, H., Lin, Y., Zhang, J., Liang, F., Fang, F., Yang, F., Wang, P., Zhu, Z., Chen, X., et al. (2018) · Microfluidics and Nanofluidics · doi:10.1007/s10404-018-2043-7 · Cited by 28
He, F., He, J., Deng, X., Li, D.-W., Ahmad, F., Liu, Y.-Y., Liu, Y., Ye, Y., Zhang, C., & Yin, D. (2017) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aa8901 · Cited by 27
Melt-electrospinning of poly(ether ether ketone) fibers to avoid sulfonation
Govinna, N. D., Keller, T., Schick, C. H., & Cebe, P. (2019) · Polymer · doi:10.1016/j.polymer.2019.03.041 · Cited by 27
Melt-electrospinning of Polyphenylene Sulfide
An, Y., Yu, S., Li, S., Wang, X., Yang, W., Yousefzadeh, M., Bubakir, M. M., & Li, H. (2018) · Fibers and Polymers · doi:10.1007/s12221-018-8619-8 · Cited by 25
Paindelli, C., Navone, N. M., Logothetis, C. J., Friedl, P., & Dondossola, E. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.01.027 · Cited by 24
Development of Bioactive Packaging Structure Using Melt Electrospinning
Bhullar, S. K., Kaya, B., & Jun, M. B. (2015) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0713-z · Cited by 23
Ko, J., Ahsani, V., Yao, S. X., Mohtaram, N. K., Lee, P. C., & Jun, M. B. (2016) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aa4fd9 · Cited by 23
Wunner, F. M., Maartens, J. H., Bas, O., Gottschalk, K., De‐Juan‐Pardo, E. M., & Hutmacher, D. W. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.12.079 · Cited by 22
Self-citationPortable melt electrospinning apparatus without an extra electricity supply
Yan, X., Duan, X.-P., Yu, S., Li, Y.-M., Lv, X., Li, J., Chen, H., Ning, X., & Long, Y. (2017) · RSC Advances · doi:10.1039/c7ra04937d · Cited by 19
Semjonov, K., Lust, A., Kogermann, K., Laidmäe, I., Maunu, S. L., Hirvonen, S.-P., Yliruusi, J. K., Nurk, G., Lust, E., & Heinämäki, J. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.06.004 · Cited by 19
Robot-aided electrospinning toward intelligent biomedical engineering
Tan, R., Yang, X., & Shen, Y. (2017) · Robotics and Biomimetics · doi:10.1186/s40638-017-0075-1 · Cited by 18
Lee, G.-Y., Lee, H., Ryu, W., Ahn, S., & Yang, J. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aae041 · Cited by 18
Liang, F., Wang, H., Lin, Y., Zhou, Y., Wang, Z., Chen, X., Cai, N., Yang, F., Wu, P., He, Y., et al. (2018) · Materials Research Express · doi:10.1088/2053-1591/aae6f3 · Cited by 17
Bubakir, M. M., He, W. L., Li, H. Y., et al. (2016) · Key engineering materials · doi:10.4028/www.scientific.net/kem.717.104 · Cited by 15
Morphology control of PLA microfibers and spheres via melt electrospinning
Yu, S., Zheng, J., Yan, X., Wang, X., Nie, G., Tan, Y., Zhang, J., Sui, K., & Long, Y. (2018) · Materials Research Express · doi:10.1088/2053-1591/aab9f4 · Cited by 15
Emerging Trends in Information‐Driven Engineering of Complex Biological Systems
Steier, A., Muñiz, A. J., Neale, D. B., & Lahann, J. (2019) · Advanced Materials · doi:10.1002/adma.201806898 · Cited by 15
Liu, Y., Cao, K., Karpova, S. G., et al. (2018) · Macromolecular Symposia · doi:10.1002/masy.201800130 · Cited by 11
Self-layering behavior of PET fiber deposition in melt-electrospinning process
Xu, Y., Wang, D., Zhang, M., Wang, H., & Weı, Q. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-7147-2 · Cited by 7
Lee, J. K., Ko, J., Jun, M. B., & Lee, P. C. (2016) · Materials Research Express · doi:10.1088/2053-1591/3/2/025301 · Cited by 6
Prefabricated and Self-Setting Cement Laminates
Brückner, T., Fuchs, A. R., Wistlich, L., Hoess, A., Nies, B. A., & Gbureck, U. (2019) · Materials · doi:10.3390/ma12050834 · Cited by 6
Fabrication of optically active fiber mats via melt electrospinning
Murphy, J. P., Brockway, M. C., Andriolo, J. M., Sutton, N. J., & Skinner, J. L. (2018) · MRS Communications · doi:10.1557/mrc.2018.154 · Cited by 5
5.11 Engineering the Haematopoietic Stem Cell Niche In Vitro
Muerza-Cascante, M. L., Khosrotehrani, K., Haylock, D. N., Hutmacher, D. W., & Loessner, D. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10129-8 · Cited by 2
Self-citation
Cited by
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Polymers for Melt Electrowriting
Kade, J. C., & Dalton, P. D. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202001232 · Cited by 270
Self-citation
Metadata
- Authors
- Robinson, T. M., Hutmacher, D. W., & Dalton, P. D.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-08-18
- Volume
- 29
- Issue
- 44
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2969373676
- Cited by
- 267
- References
- 162
- FWCI
- 8.59
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.