The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Lignin as a Wood‐Inspired Binder Enabled Strong, Water Stable, and Biodegradable Paper for Plastic Replacement
Abstract
Plastic waste has been increasingly transferred from land into the ocean and has accumulated within the food chain, causing a great threat to the environment and human health, indicating that fabricating an eco‐friendly and biodegradable replacement is urgent. Paper made of cellulose is attractive in terms of its favorable biodegradability, resource abundance, large manufacturing scale, and low material cost, but is usually hindered by its inferior stability against water and poor mechanical strength for plastic replacement. Here, inspired by the reinforcement principle of cellulose and lignin in natural wood, a strong and hydrostable cellulosic material is developed by integrating lignin into the cellulose. Lignin as a reinforced matrix is incorporated to the cellulose fiber scaffold by successive infiltration and mechanical hot‐pressing treatments. The resulting lignin‐cellulose composite exhibits an outstanding isotropic tensile strength of 200 MPa, which is significantly higher than that of conventional cellulose paper (40 MPa) and some commercial petroleum‐based plastics. Additionally, the composite demonstrates a superior wet strength of 50 MPa. Adding lignin also improves the thermostability and UV‐blocking performance of cellulose paper. The demonstrated lignin‐cellulose composite is biodegradable and eco‐friendly with both components from natural wood, which represents a promising alternative that can potentially replace the nonbiodegradable plastics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Lignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
River plastic emissions to the world’s oceans
Lebreton, L. C. M., van der Zwet, J., Damsteeg, J.-W., Slat, B., Andrady, A., & Reisser, J. (2017) · Nature Communications · doi:10.1038/ncomms15611 · Cited by 4,011
Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading
Schutyser, W., Renders, T., Van den Bosch, S., Koelewijn, S.-F., Beckham, G. T., & Sels, B. F. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00566k · Cited by 2,552
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
Sun, Z., Fridrich, B., de Santi, A., Elangovan, S., & Barta, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00588 · Cited by 2,191
Noncovalent interactions: A challenge for experiment and theory
Müller-Dethlefs, K., & Hobza, P. (2000) · Chemical Reviews · doi:10.1021/cr9900331 · Cited by 1,781
Processing bulk natural wood into a high-performance structural material
Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., et al. (2018) · Nature · doi:10.1038/nature25476 · Cited by 1,632
Self-citationA radiative cooling structural material
Li, T., Zhai, Y., He, S., Gan, W., Wei, Z., Heidarinejad, M., Dalgo, D., Mi, R., Zhao, X., Song, J., et al. (2019) · Science · doi:10.1126/science.aau9101 · Cited by 1,614
Self-citationStrategies for the Conversion of Lignin to High-Value Polymeric Materials: Review and Perspective
Upton, B. M., & Kasko, A. M. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00345 · Cited by 1,519
Multifunctional wearable devices for diagnosis and therapy of movement disorders
Son, D., Lee, J., Qiao, S., Ghaffari, R., Kim, J., Lee, J. E., Song, C., Kim, S. J., Lee, D. J., Jun, S. W., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.38 · Cited by 1,462
Tejado, A., Peña, C., Labidi, J., Echeverria, J. M., & Mondragon, I. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.05.042 · Cited by 1,112
Electronic dura mater for long-term multimodal neural interfaces
Minev, I. R., Musienko, P., Hirsch, A., Barraud, Q., Wenger, N., Moraud, E. M., Gandar, J., Capogrosso, M., Milekovic, T., Asboth, L., et al. (2015) · Science · doi:10.1126/science.1260318 · Cited by 1,082
Chen, W., Yu, H., Liu, Y., Chen, P., Zhang, M., & Hai, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.10.040 · Cited by 971
Highly Anisotropic, Highly Transparent Wood Composites
Zhu, M., Song, J., Li, T., Gong, A., Wang, Y., Dai, J., Yao, Y., Luo, W., Henderson, D., & Hu, L. (2016) · Advanced Materials · doi:10.1002/adma.201600427 · Cited by 744
Self-citationPu, Y., Hu, F., Huang, F., Davison, B. H., & Ragauskas, A. J. (2013) · Biotechnology for Biofuels · doi:10.1186/1754-6834-6-15 · Cited by 608
Cellulose ionic conductors with high differential thermal voltage for low-grade heat harvesting
Li, T., Zhang, X., Lacey, S. D., Mi, R., Zhao, X., Jiang, F., Song, J., Liu, Z., Chen, G., Dai, J., et al. (2019) · Nature Materials · doi:10.1038/s41563-019-0315-6 · Cited by 577
Self-citationHydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments
Håkansson, K. M. O., Fall, A. B., Lundell, F., Yu, S., Krywka, C., Roth, S. V., Santoro, G., Kvick, M., Prahl Wittberg, L., Wågberg, L., et al. (2014) · Nature Communications · doi:10.1038/ncomms5018 · Cited by 523
Anomalous scaling law of strength and toughness of cellulose nanopaper
Zhu, H., Zhu, S., Jia, Z., Parvinian, S., Li, Y., Vaaland, O., Hu, L., & Li, T. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1502870112 · Cited by 424
Self-citationPolymer/lignin blends: Interactions, properties, applications
Kun, D., & Pukánszky, B. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.04.035 · Cited by 417
Zhang, X., Liu, W., Yang, D., & Qiu, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806912 · Cited by 385
Flexible Electronics Based on Micro/Nanostructured Paper
Zhang, Y., Zhang, L., Cui, K., Ge, S., Cheng, X., Yan, M., Yu, J., & Liu, H. (2018) · Advanced Materials · doi:10.1002/adma.201801588 · Cited by 380
A critical review on the analysis of lignin carbohydrate bonds
Giummarella, N., Pu, Y., Ragauskas, A. J., & Lawoko, M. (2019) · Green Chemistry · doi:10.1039/c8gc03606c · Cited by 350
3D Printed High‐Performance Lithium Metal Microbatteries Enabled by Nanocellulose
Cao, D., Xing, Y., Tantratian, K., Wang, X., Ma, Y., Mukhopadhyay, A., Cheng, Z., Zhang, Q., Jiao, Y., Chen, L., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807313 · Cited by 337
Lignin: Historical, Biological, and Materials Perspectives
(1999) · ACS Symposium Series · doi:10.1021/bk-2000-0742 · Cited by 329
Tunable Thermosetting Epoxies Based on Fractionated and Well-Characterized Lignins
Gioia, C., Lo Re, G., Lawoko, M., & Berglund, L. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b13620 · Cited by 308
Lignin‐Retaining Transparent Wood
Li, Y., Fu, Q., Rojas, R., Yan, M., Lawoko, M., & Berglund, L. (2017) · ChemSusChem · doi:10.1002/cssc.201701089 · Cited by 298
Super‐Strong, Super‐Stiff Macrofibers with Aligned, Long Bacterial Cellulose Nanofibers
Wang, S., Jiang, F., Xu, X., Kuang, Y., Fu, K., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702498 · Cited by 292
Self-citationBenítez, A. J., Torres-Rendon, J., Poutanen, M., & Walther, A. (2013) · Biomacromolecules · doi:10.1021/bm401451m · Cited by 287
Direct evidence for α ether linkage between lignin and carbohydrates in wood cell walls
Nishimura, H., Kamiya, A., Nagata, T., Katahira, M., & Watanabe, T. (2018) · Scientific Reports · doi:10.1038/s41598-018-24328-9 · Cited by 286
Li, Y., & Shimizu, H. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.12.010 · Cited by 270
Gordobil, O., Moriana, R., Zhang, L., Labidi, J., & Sevastyanova, O. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.12.048 · Cited by 258
Laitinen, O., Suopajärvi, T., Österberg, M., & Liimatainen, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06304 · Cited by 241
Hybrid indium phosphide-on-silicon nanolaser diode
Crosnier, G., Sanchez, D., Bouchoule, S., Monnier, P., Beaudoin, G., Sagnes, I., Raj, R., & Raineri, F. (2017) · Nature Photonics · doi:10.1038/nphoton.2017.56 · Cited by 236
High‐Adhesion Stretchable Electrodes Based on Nanopile Interlocking
Liu, Z., Wang, X., Qi, D., Xu, C., Yu, J., Liu, Y., Jiang, Y., Liedberg, B., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201603382 · Cited by 225
Ding, R., Wu, H., Thunga, M., Bowler, N., & Kessler, M. R. (2016) · Carbon · doi:10.1016/j.carbon.2015.12.078 · Cited by 210
Macrofibers with High Mechanical Performance Based on Aligned Bacterial Cellulose Nanofibers
Yao, J., Chen, S., Chen, Y., Wang, B., Pei, Q., & Wang, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14650 · Cited by 203
Torres-Rendon, J. G., Schacher, F. H., Ifuku, S., & Walther, A. (2014) · Biomacromolecules · doi:10.1021/bm500566m · Cited by 178
Wang, Q., Du, H., Zhang, F., Zhang, Y., Wu, M., Yu, G., Liu, C., Li, B., & Peng, H. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01986j · Cited by 170
The significance of the glass transition of lignin in thermomechanical pulping
Irvine, G. M. (1985) · Wood Science and Technology · doi:10.1007/bf00353074 · Cited by 166
Pang, J., Wu, M., Zhang, Q., Tan, X., Xu, F., Zhang, X., & Sun, R. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.11.067 · Cited by 165
Scalable, anisotropic transparent paper directly from wood for light management in solar cells
Jia, C., Li, T., Chen, C., Dai, J., Kierzewski, I. M., Song, J., Li, Y., Yang, C., Wang, C., & Hu, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.059 · Cited by 148
Self-citationLight management in plastic–paper hybrid substrate towards high-performance optoelectronics
Yao, Y., Tao, J., Zou, J., Zhang, B., Li, T., Dai, J., Zhu, M., Wang, S., Fu, K. K., Henderson, D., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01011c · Cited by 136
Self-citationDry-Spun Single-Filament Fibers Comprising Solely Cellulose Nanofibers from Bioresidue
Hooshmand, S., Aitomäki, Y., Norberg, N. S., Mathew, A. P., & Oksman, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03091 · Cited by 131
Millisecond Pulsed Films Unify the Mechanisms of Cellulose Fragmentation
Krumm, C., Pfaendtner, J., & Dauenhauer, P. J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00580 · Cited by 120
Deng, S., Huang, R., Zhou, M., Chen, F., & Fu, Q. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.07.101 · Cited by 106
Kim, K. H., & Jo, W. H. (2008) · Carbon · doi:10.1016/j.carbon.2008.12.043 · Cited by 101
Yun, Z., Wu, J.-Q., Li, H., Yuan, T., Wang, Y., & Sun, R. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01485 · Cited by 98
Use of acetylated softwood kraft lignin as filler in synthetic polymers
Jeong, H., Park, J., Kim, S., Lee, J., & Cho, J. W. (2012) · Fibers and Polymers · doi:10.1007/s12221-012-1310-6 · Cited by 76
Water resistant nanopapers prepared by lactic acid modified cellulose nanofibers
Sethi, J., Farooq, M., Sain, S., Sain, M. M., Sirviö, J. A., Illikainen, M., & Oksman, K. (2017) · Cellulose · doi:10.1007/s10570-017-1540-2 · Cited by 76
Hakalahti, M., Salminen, A., Seppälä, J. V., Tammelin, T., & Hänninen, T. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.007 · Cited by 69
Macromolecular replication during lignin biosynthesis
Chen, Y., & Sarkanen, S. (2010) · Phytochemistry · doi:10.1016/j.phytochem.2009.11.012 · Cited by 55
Liu, Y., Sheng, J., Wu, H., He, Q., Cheng, H., Shakir, M. I., Huang, Y., & Duan, X. (2016) · Advanced Materials · doi:10.1002/adma.201506173 · Cited by 46
Cited by
Developing fibrillated cellulose as a sustainable technological material
Li, T., Chen, C., Brozena, A. H., Zhu, J. Y., Xu, L., Driemeier, C., Dai, J., Rojas, O. J., Isogai, A., Wågberg, L., et al. (2021) · Nature · doi:10.1038/s41586-020-03167-7 · Cited by 1,674
Self-citationMaterials design by synthetic biology
Tang, T.-C., An, B., Huang, Y., Vasikaran, S., Wang, Y., Jiang, X., Lu, T. K., & Zhong, C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00265-w · Cited by 386
Wang, H.-M., Yuan, T.-Q., Song, G.-Y., & Sun, R.-C. (2021) · Green Chemistry · doi:10.1039/d1gc00790d · Cited by 292
Design, manufacturing and applications of wearable triboelectric nanogenerators
Wang, H., Han, M., Song, Y., & Zhang, H. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105627 · Cited by 179
Metadata
- Authors
- Jiang, B., Chen, C., Liang, Z., He, S., Kuang, Y., Song, J., Mi, R., Chen, G., Jiao, M., & Hu, L.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-10-29
- Volume
- 30
- Issue
- 4
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2982594475
- Cited by
- 416
- References
- 55
- FWCI
- 7.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.