Engineering Liver Microtissues for Disease Modeling and Regenerative Medicine
Open accessThe DOI matches its Crossref record; 270 of the 270 references it cites were found in a registry or an index.
Abstract
The burden of liver diseases is increasing worldwide, accounting for two million deaths annually. In the past decade, tremendous progress has been made in the basic and translational research of liver tissue engineering. Liver microtissues are small, 3D hepatocyte cultures that recapitulate liver physiology and have been used in biomedical research and regenerative medicine. This review summarizes the recent advances, challenges, and future directions in liver microtissue research. Cellular engineering approaches are used to sustain primary hepatocytes or produce hepatocytes derived from pluripotent stem cells and other adult tissues. 3D microtissues are generated using scaffold‐free assembly or scaffold‐assisted methods such as macroencapsulation, droplet microfluidics, and bioprinting. Optimization of the hepatic microenvironment entails incorporating the appropriate cell composition for enhanced cell–cell interactions and niche‐specific signals, and creating scaffolds with desired chemical, mechanical, and physical properties. Perfusion‐based culture systems such as bioreactors and microfluidic systems are used to achieve efficient exchange of nutrients and soluble factors. Taken together, systematic optimization of liver microtissues is a multidisciplinary effort focused on creating liver cultures and on‐chip models with greater structural complexity and physiological relevance for use in liver disease research, therapeutic development, and regenerative medicine.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This reactor consists of a series of hollow fibers with micropores, where cells are typically cultured on both the inner and outer surfaces of the fibers [188, 189].”
From Constructing biomimetic microenvironments for liver regeneration (2025) · doi:10.1186/s12951-025-03729-9 · cites this paper as [189]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Takahashi, K., & Yamanaka, S. (2006) · Cell · doi:10.1016/j.cell.2006.07.024 · Cited by 26,673
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Bataller, R., & Brenner, D. A. (2005) · Journal of Clinical Investigation · doi:10.1172/jci24282 · Cited by 4,958
HIGH-YIELD PREPARATION OF ISOLATED RAT LIVER PARENCHYMAL CELLS
Berry, M. N., & Friend, D. S. (1969) · The Journal of Cell Biology · doi:10.1083/jcb.43.3.506 · Cited by 4,424
Reconstituting organ-level lung functions on a chip
Huh, D., Matthews, B. D., Mammoto, A., Montoya-Zavala, M., Hsin, H. Y., & Ingber, D. E. (2010) · Science · doi:10.1126/science.1188302 · Cited by 4,250
Burden of liver diseases in the world
Asrani, S. K., Devarbhavi, H., Eaton, J., & Kamath, P. S. (2019) · Journal of Hepatology · doi:10.1016/j.jhep.2018.09.014 · Cited by 3,783
Organoid Models and Applications in Biomedical Research
Xinaris, C., Brizi, V., & Remuzzi, G. (2015) · Nephron · doi:10.1159/000433566 · Cited by 3,515
Bhatia, S. N., & Ingber, D. E. (2014) · Nature Biotechnology · doi:10.1038/nbt.2989 · Cited by 3,305
Embryonic stem cell lines from human blastocysts: somatic differentiation in vitro
Reubinoff, B. E., Pera, M. F., Fong, C.-Y., Trounson, A., & Bongso, A. (2000) · Nature Biotechnology · doi:10.1038/74447 · Cited by 2,706
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
Research works printed but not linked: 22
- [9].Kehtari M, Beiki B, Zeynali B, Hosseini FS, Soleimanifar F, Kaabi M, Soleimani M, Enderami SE, Kabiri M, Mahboudi H, J. Cell. Biochem. 2019, 120, 6683. [DOI] [PubMed] [Google Scholar]
- [10] a).Berry MN, Friend DS, The Journal of cell biology 1969, 43, 506; [DOI] [PMC free article] [PubMed] [Google Scholar]; b) Bojar H, Basler M, Fuchs F, Dreyfurst R, Staib W, Broelsch C, Journal of clinical chemistry and clinical biochemistry. Zeitschrift fur klinische Chemie und klinische Biochemie 1976, 14, 527. [DOI] [PubMed] [Google Scholar]
- [18] a).Rowe C, Gerrard DT, Jenkins R, Berry A, Durkin K, Sundstrom L, Goldring CE, Park BK, Kitteringham NR, Hanley KP, Hanley NA, Hepatology (Baltimore, Md.) 2013, 58, 799; [DOI] [PMC free article] [PubMed] [Google Scholar]; b) Franko A, Hartwig S, Kotzka J, Ruoss M, Nussler AK, Konigsrainer A, Haring HU, Lehr S, Peter A, Nutrients 2019, 11. [DOI] [PMC free article] [PubMed] [Google Scholar]
- [20].Tascher G, Burban A, Camus S, Plumel M, Chanon S, Le Guevel R, Shevchenko V, Van Dorsselaer A, Lefai E, Guguen-Guillouzo C, Bertile F, Cells 2019, 8. [DOI] [PMC free article] [PubMed] [Google Scholar]
- [30].Zakikhan K, Pournasr B, Vosough M, Nassiri-Asl M, Cell J 2017, 19, 204. [DOI] [PMC free article] [PubMed] [Google Scholar]
- [33].Bell CC, Dankers ACA, Lauschke VM, Sison-Young R, Jenkins R, Rowe C, Goldring CE, Park K, Regan SL, Walker T, Schofield C, Baze A, Foster AJ, Williams DP, van de Ven AWM, Jacobs F, Houdt JV, Lahteenmaki T, Snoeys J, Juhila S, Richert L, Ingelman-Sundberg M, Toxicol Sci 2018, 162, 655. [DOI] [PMC free article] [PubMed] [Google Scholar] · DOI · Paper page
- [42] a).Takebe T, Sekine K, Enomura M, Koike H, Kimura M, Ogaeri T, Zhang RR, Ueno Y, Zheng YW, Koike N, Aoyama S, Adachi Y, Taniguchi H, Nature 2013, 499, 481; [DOI] [PubMed] [Google Scholar]; b) Takebe T, Koike N, Sekine K, Fujiwara R, Amiya T, Zheng Y-W, Taniguchi H, Organogenesis 2014, 10, 260. [DOI] [PMC free article] [PubMed] [Google Scholar] · DOI · Paper page
- [56] a).Wang H, Liu HT, Liu H, Su WT, Chen WW, Qin JH, Adv. Mater. Technol. 2019, 4, 10; [Google Scholar]; b) Chen Q, Utech S, Chen D, Prodanovic R, Lin JM, Weitz DA, Lab Chip 2016, 16, 1346. [DOI] [PMC free article] [PubMed] [Google Scholar]
- [59].Holzl K, Lin SM, Tytgat L, Van Vlierberghe S, Gu LX, Ovsianikov A, Biofabrication 2016, 8. [DOI] [PubMed] [Google Scholar]
- [61].Mazzocchi A, Devarasetty M, Huntwork R, Soker S, Skardal A, Biofabrication 2019, 11, 11. [DOI] [PMC free article] [PubMed] [Google Scholar]
- [62] a).Choudhury D, Tun HW, Wang T, Naing MW, Trends Biotechnol 2018, 36, 787; [DOI] [PubMed] [Google Scholar]; b) Ma XY, Yu C, Wang PR, Xu WZ, Wan XY, Lai CSE, Liu J, Koroleva-Maharajh A, Chen SC, Biomaterials 2018, 185, 310; [DOI] [PMC free article] [PubMed] [Google Scholar]; Yu C, Ma XY, Zhu W, Wang PR, Miller KL, Stupin J, Koroleva-Maharajh A, Hairabedian A, Chen SC, Biomaterials 2019, 194, 1; [DOI] [PMC free article] [PubMed] [Google Scholar]; c) Hiller T, Berg J, Elomaa L, Rohrs V, Ullah I, Schaar K, Dietrich AC, Al-Zeer MA, Kurtz A, Hocke AC, Hippenstiel S, Fechner H, Weinhart M, Kurreck J, Int. J. Mol. Sci. 2018, 19, 17. [DOI] [PMC free article] [PubMed] [Google Scholar]
- [78].Pettinato G, Lehoux S, Ramanathan R, Salem MM, He L-X, Muse O, Flaumenhaft R, Thompson MT, Rouse EA, Cummings RD, Wen X, Fisher RA, Sci Rep-Uk 2019, 9, 8920. [DOI] [PMC free article] [PubMed] [Google Scholar] · DOI · Paper page
- [87].Dixon LJ, Barnes M, Tang H, Pritchard MT, Nagy LE, Comprehensive Physiology 2013, 3, 785. [DOI] [PMC free article] [PubMed] [Google Scholar] · doi:10.1002/j.2040-4603.2013.tb00510.x · Paper page
- [90].Xu J, Cong M, Park TJ, Scholten D, Brenner DA, Kisseleva T, Hepatobiliary Surg Nutr 2015, 4, 34. [DOI] [PMC free article] [PubMed] [Google Scholar]
- [92].Sato K, Kennedy L, Liangpunsakul S, Kusumanchi P, Yang ZH, Meng FY, Glaser S, Francis H, Alpini G, Int. J. Mol. Sci. 2019, 20. [DOI] [PMC free article] [PubMed] [Google Scholar]
- [93] a).Messner S, Fredriksson L, Lauschke VM, Roessger K, Escher C, Bober M, Kelm JM, Ingelman-Sundberg M, Moritz W, Applied In Vitro Toxicology 2017, 4, 1; [DOI] [PMC free article] [PubMed] [Google Scholar]; b) Prestigiacomo V, Weston A, Messner S, Lampart F, Suter-Dick L, PLOS ONE 2017, 12, e0179995; [DOI] [PMC free article] [PubMed] [Google Scholar]; c) Mukherjee S, Zhelnin L, Sanfiz A, Pan J, Li ZY, Yarde M, McCarty J, Jarai G, Am J Transl Res 2019, 11, 1531. [PMC free article] [PubMed] [Google Scholar]
- [101].Bruinsma BG, Kim Y, Berendsen TA, Ozer S, Yarmush ML, Uygun BE, J Clin Transl Res 2015, 1, 48; [DOI] [PMC free article] [PubMed] [Google Scholar]; Hussein KH, Park K-M, Kang K-S, Woo H-M, Acta Biomater. 2016, 38, 82. [DOI] [PubMed] [Google Scholar]
- [107].Janani G, Nandi SK, Mandal BB, Acta Biomater. 2018, 67, 167; [DOI] [PubMed] [Google Scholar]; Kundu B, Kundu SC, Biomed Mater 2013, 8. [DOI] [PubMed] [Google Scholar]
- [111].Jain E, Damania A, Kumar A, Hepatol Int 2014, 8, 185. [DOI] [PubMed] [Google Scholar]
- [113].Kazemnejad S, Avicenna J Med Biotechnol 2009, 1, 135. [PMC free article] [PubMed] [Google Scholar]
- [131]a).Powers MJ, Biotechnology and bioengineering 78, 257; [DOI] [PubMed] [Google Scholar]; b) Cheng S, Prot J-M, Leclerc E, Bois FY, BMC Genomics 2012, 13, 54. [DOI] [PMC free article] [PubMed] [Google Scholar]
- [153].Bhatia SN, Underhill GH, Zaret KS, Fox IJ, Sci Transl Med 2014, 6. [DOI] [PMC free article] [PubMed] [Google Scholar]
Cited by
The role of three-dimensional printing in healthcare and medicine
Kholgh Eshkalak, S., Rezvani Ghomi, E., Dai, Y., Choudhury, D., & Ramakrishna, S. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108940 · Cited by 162
Microfluidic Formulation of Topological Hydrogels for Microtissue Engineering
Rojek, K. O., Ćwiklińska, M., Kuczak, J., & Guzowski, J. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00798 · Cited by 149
Emerging Biofabrication Techniques: A Review on Natural Polymers for Biomedical Applications
Puertas‐Bartolomé, M., Mora‐Boza, A., & García‐Fernández, L. (2021) · Polymers · doi:10.3390/polym13081209 · Cited by 160
“Cell therapies based on MSCs are particularly interesting in ameliorating immune-related diseases and dysregulations, but they are limited due to short in vivo persistence [44,45,61,62].”
BackgroundFang, Y., Guo, Y., Ji, M., Li, B., Guo, Y., Zhu, J., Zhang, T., & Xiong, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109810 · Cited by 127
Chen, B., Dong, J., Ruelas, M., Ye, X., He, J., Yao, R., Fu, Y., Liu, Y., Hu, J., Wu, T., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201843 · Cited by 135
Modeling nonalcoholic fatty liver disease on a liver lobule chip with dual blood supply
Du, K., Li, S., Li, C., Li, P., Miao, C., Luo, T., Qiu, B., & Ding, W. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.07.013 · Cited by 69
Zhang, J., Chan, H. F., Wang, H., Shao, D., Tao, Y., & Li, M. (2021) · Journal of Tissue Engineering · doi:10.1177/2041731420986711 · Cited by 52
Constructing biomimetic liver models through biomaterials and vasculature engineering
Lv, W., Zhou, H., Aazmi, A., Yu, M., Xu, X., Yang, H., Huang, Y. Y. S., & Ma, L. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac079 · Cited by 45
“Hepatocytes Primary hepatocytes, from human Metabolic and secretory functions of the liver [65, 66] HepG2 (hepatocellular carcinoma, cell line, from human) Metabolic and secretory functions of the liver [67–70]”
BackgroundIn vitro functional models for human liver diseases and drug screening: beyond animal testing
Paradiso, A., Volpi, M., Rinoldi, C., Celikkin, N., Contessi Negrini, N., Bilgen, M., Dallera, G., Pierini, F., Costantini, M., Święszkowski, W., et al. (2023) · Biomaterials Science · doi:10.1039/d1bm01872h · Cited by 40
Fan, Z., Wei, X., Chen, K., Wang, L., & Xu, M. (2023) · Micromachines · doi:10.3390/mi14040878 · Cited by 44
Recent Advances in the Development and Application of Cell-Loaded Collagen Scaffolds
He, Q., Feng, T., Xie, Y., Sathiskumar, S., Zhou, Y., Zhou, Y., Zhou, H. H., & Peng, X. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms26094009 · Cited by 48
“These models can promote cell differentiation, proliferation, and migration, ultimately enhancing liver injury repair [138].”
The Material World of 3D‐Bioprinted and Microfluidic‐Chip Models of Human Liver Fibrosis
Carvalho, A. M., Bansal, R., Barrias, C. C., & Sarmento, B. F. C. C. (2023) · Advanced Materials · doi:10.1002/adma.202307673 · Cited by 38
He, J., Wang, J., Pang, Y., Yu, H., Qin, X., Su, K., Xu, T., & Ren, H. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i3.581 · Cited by 35
“So far, methods of constructing 3D hepatic tissue models mainly include scaffold-free and scaffold-based approaches[6].”
MethodRecent advances in liver‐on‐chips: Design, fabrication, and applications
Qiu, L., Kong, B., Kong, T., & Wang, H. (2023) · Smart Medicine · doi:10.1002/smmd.20220010 · Cited by 44
Establishing a 3D In Vitro Hepatic Model Mimicking Physiologically Relevant to In Vivo State
Kang, H. K., Sarsenova, M., Kim, D., Kim, M. S., Lee, J. Y., Sung, E., Kook, M. G., Kim, N. G., Choi, S. W., Ogay, V. B., et al. (2021) · Cells · doi:10.3390/cells10051268 · Cited by 36
Jin, Y., Zhang, J., Chen, X., Li, F., Xue, T., Yi, K., Xu, Y., Wang, H., Lao, Y., Chan, H. F., et al. (2024) · Biomaterials · doi:10.1016/j.biomaterials.2024.122895 · Cited by 37
Revolutionizing the female reproductive system research using microfluidic chip platform
Yan, J., Wu, T., Zhang, J., Gao, Y., Wu, J., & Wang, S. (2023) · Journal of Nanobiotechnology · doi:10.1186/s12951-023-02258-7 · Cited by 38
Engineering considerations in the design of tissue specific bioink for 3D bioprinting applications
Tripathi, S., Dash, M., Chakraborty, R., Junaedi, H., Kumar, P., Hassan, S., Mehboob, H., Singh, H., & Nanda, H. S. (2024) · Biomaterials Science · doi:10.1039/d4bm01192a · Cited by 40
Hydrogel-Based Strategies for Liver Tissue Engineering
Zhang, Y., Li, L., Dong, L., Cheng, Y., Huang, X., Xue, B., Jiang, C., Cao, Y., & Yang, J. (2024) · Chem & Bio Engineering · doi:10.1021/cbe.4c00079 · Cited by 39
“261,291 Therefore, there is a need for novel BALS that can replicate real liver functions, including dynamic substance exchange and cell − cell or cell-environment interactions, as observed in living organs.”
Zhang, J., Xu, Y., Zhuo, C., Shi, R., Wang, H., Hu, Z., Chan, H. F., Kim, H.-W., Tao, Y., & Li, M. (2023) · Biomaterials · doi:10.1016/j.biomaterials.2023.122014 · Cited by 29
Scaffold-mediated liver regeneration: A comprehensive exploration of current advances
Supriya Bhatt, S., Kumar, J. K., Laya, S., Thakur, G., & Nune, M. (2024) · Journal of Tissue Engineering · doi:10.1177/20417314241286092 · Cited by 30
“111,113 Furthermore, investigations have demonstrated that the mechanical characteristics of PEG scaffolds can be controlled by altering the concentration of PEG.”
BackgroundBioartificial livers: a review of their design and manufacture
Tuerxun, K., He, J., Ibrahim, I., Yusupu, Z., Yasheng, A., Xu, Q., Tang, R., Aikebaier, A., Wu, Y., Tuerdi, M., et al. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6e86 · Cited by 24
“In addition to early developed sandwich cultures in which cells are cultured between double layers of ECM materials [166], novel techniques such as cell sheet assembly and microfluidic devices facilitate the polarity and functions of hepatocytes [167].”
Li, F., Wei, H., Jin, Y., Xue, T., Xu, Y., Wang, H., Ju, E., Tao, Y., & Li, M. (2023) · ACS Nano · doi:10.1021/acsnano.3c08495 · Cited by 23
Deng, S., Zhao, X., Zhu, Y., Tang, N., Wang, R., Zhang, X., Qu, F., Ho, Y., Lee, W., Chen, J., et al. (2022) · Biofabrication · doi:10.1088/1758-5090/aca79b · Cited by 25
Asadi, M., Khalili, M., Lotfi, H., Moghaddam, S. V., Zarghami, N., André, H., & Alizadeh, E. (2021) · Life Sciences · doi:10.1016/j.lfs.2021.119373 · Cited by 22
Li, G., Chen, Y., Zhang, X., Tang, A., & Yang, H. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c22581 · Cited by 23
Advancing hepatotoxicity assessment: current advances and future directions
Kim, Y., Kim, Y., & Kim, Y. (2025) · Toxicological Research · doi:10.1007/s43188-025-00289-w · Cited by 22
“The liver-on-a-chip model incorporates a fluid flow system that facilitates dynamic culture, enabling the continuous delivery of nutrients and metabolites while mimicking cell-to-cell interactions [153, 154].”
Liu, Y., Liu, D., Xue, Y., Sun, H., Zhan, X., Sun, L., & Kang, K. (2025) · International Journal of Nanomedicine · doi:10.2147/ijn.s503445 · Cited by 17
Hyperplastic Human Macromass Cartilage for Joint Regeneration
Wen, Y., Chen, Y., Wu, W., Zhang, H., Peng, Z., Yao, X., Zhang, X., Jiang, W. M., Liao, Y., Xie, Y., et al. (2023) · Advanced Science · doi:10.1002/advs.202301833 · Cited by 18
Saha, T., Mehrotra, S., Gupta, P., & Kumar, A. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123140 · Cited by 17
Aqueous liquid–liquid phase separation (AqLLPS) droplet microreactors for biocatalysis
Du, F., Xin, H., Zheng, H., Wang, W., Yuan, H., Liu, C., Meng, T., & Ma, Q. (2025) · Green Chemistry · doi:10.1039/d5gc02073e · Cited by 15
Hydrogels as carriers deliver stem cells/exosomes for liver injury
Zheng, Q., Yao, J., Sun, Z., Mao, Y., Wei, J., Xie, Y., Hu, X., & Li, X. (2024) · Materials Advances · doi:10.1039/d3ma01046e · Cited by 16
An In Vitro Whole-Organ Liver Engineering for Testing of Genetic Therapies
Lorvellec, M., Pellegata, A. F., Maestri, A., Turchetta, C., Mediavilla, E. A., Shibuya, S., Jones, B. C., Scottoni, F., Perocheau, D. P. B., Cozmescu, A. C., et al. (2020) · iScience · doi:10.1016/j.isci.2020.101808 · Cited by 15
Wang, J., Qin, X., Kong, B., & Ren, H. (2022) · Smart Medicine · doi:10.1002/smmd.20220002 · Cited by 13
Constructing biomimetic microenvironments for liver regeneration
(2025) · doi:10.1186/s12951-025-03729-9 · Cited by 11
“This reactor consists of a series of hollow fibers with micropores, where cells are typically cultured on both the inner and outer surfaces of the fibers [188, 189].”
Wang, A. J.-S., Allen, A., Sofman, M., Sphabmixay, P., Yıldız, E., & Griffith, L. G. (2021) · Advanced NanoBiomed Research · doi:10.1002/anbr.202100049 · Cited by 12
Jiang, F., Deng, X., Gao, Y., Wu, W., Li, Y., Guo, X., Meng, H., He, F., & Wang, M. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00678 · Cited by 11
Liu, J., Hanson, A., Yin, W., Wu, Q., Wauthier, E., Diao, J., Dinh, T., Macdonald, J., Li, R., Terajima, M., et al. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.09.029 · Cited by 9
“The establishment of an ex vivo human liver model has been a pivotal goal of academic, clinical, and industrial research for decades [1,2].”
BackgroundZhu, L., Liu, S., Yang, Z., Yang, L., Yang, Y., Han, P., Yu, M., Lin, L., Xu, L., Li, Y., et al. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.04.030 · Cited by 22
“Therefore, the development of transplantable functional liver microtissues through hepatocyte engineering is a promising strategy in the field of liver regenerative medicine [6,7].”
3D bioprinting of tumor models and potential applications
Li, H., Qiao, Y., Dai, X., Tian, H., Han, Z., Cheng, S., Gao, P., & Cheng, H. (2024) · Bio-Design and Manufacturing · doi:10.1007/s42242-024-00317-y · Cited by 11
“Currently, droplet bioprinting has been successfully applied to many different types of tumors, including breast, colorectal, and liver cancers [38–40].”
3D bioprinting for bile duct tissue engineering: current status and prospects
Gao, B. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1554226 · Cited by 11
Bringing bioactive peptides into drug discovery: Challenges and opportunities for medicinal plants
Thakur, S., Punia, A., Satyakam, Acharya, V., Kumar, B., Prasad, A., Yadav, S. K., & Kumar, R. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.119855 · Cited by 8
Mir, T. A., Nakamura, M. M., Sakai, S., Iwanaga, S., Wani, S. I., Alzhrani, A., Arai, K., Mir, B. A., Kazmi, S., Assiri, A. M., et al. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.714 · Cited by 8
“Ultimately, generating multiscale functional tissue and organ replacements with sufficient maturity remains a major obstacle in translational regenerative medicine[10,17-20].”
BackgroundKobayashi, J., Arisaka, Y., Yui, N., Yamato, M., & Okano, T. (2021) · RSC Advances · doi:10.1039/d1ra07317f · Cited by 6
Weber, M., Linti, C., Lörch, C., Weber, M., Andt, M., Schlensak, C., Wendel, H. P., Doser, M., & Avci‐Adali, M. (2023) · Scientific Reports · doi:10.1038/s41598-023-49117-x · Cited by 7
Panday, R., Rogy, K. M., Han, Y. D., & Khetani, S. R. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.03.020 · Cited by 5
“…generation of monodisperse 3D hydrogels that can be precisely tuned for size, biomaterial composition, and homotypic and heterotypic cell-cell interactions while providing the ability to mitigate the effects of diffusion limitations of oxygen and nutrients as often observed in bulk gels [23,24].”
Engineered microtissues for the bystander therapy against cancer
Blanco‐Fernandez, B., Cano, I., Garrido, C., Rubí-Sans, G., Sánchez‐Cid, L., Guerra‐Rebollo, M., Rubio, N., Blanco, J., Pérez‐Amodio, S., Mateos‐Timoneda, M. A., et al. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111854 · Cited by 5
3D printing of graphene-based composites and their applications in medicine and health care
Eshkalak, S. K., Kowsari, E., & Ramakrishna, S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823789-2.00011-x · Cited by 8
Chatterjee, P., & Chakraborty, C. (2022) · Springer eBooks · doi:10.1007/978-981-16-8150-9_18 · Cited by 4
Wei, H., Xue, T., Li, F., Ju, E., Wang, H., Li, M., & Tao, Y. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.08.022 · Cited by 8
In vitro electrical stimulation of stem cells: a scoping review
Alsenaide, M., Lošić, D., Doig, R. O., & Al-Sarawi, S. F. (2025) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ae1828 · Cited by 2
xue, S., Su, Y., Xu, C., Xu, M., & Yao, R. (2023) · Research Square · doi:10.21203/rs.3.rs-2727920/v1 · Cited by 2
Self-citationZeng, C., Lin, H., Liu, Y., & Chen, S. (2024) · Asia-Pacific Journal of Oncology · doi:10.32948/ajo.2024.08.06 · Cited by 1
Varshney, P., Naunyal, G. R., Kumar, S. Y., & Laroze, D. (2026) · Chaos Solitons & Fractals · doi:10.1016/j.chaos.2026.118644 · Cited by 1
Au, A. Y., Hasenwinkel, J. M., & Frondoza, C. G. (2021) · Applied In Vitro Toxicology · doi:10.1089/aivt.2020.0015
Peptide Hydrogels for 3d Hepatocyte Encapsulation and FunctionPreprint
Xin, Y., Ligorio, C., O’Brien, M., Dong, S., Miller, A. F., Saiani, A., & Gough, J. E. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4603487
Evaluation of active substances and drugs in vitro - cell models and selected assays
Płonka-Czerw, J. M., Latocha, M. T., & Kozłowska, W. (2024) · Farmacja Polska · doi:10.32383/farmpol/181131 · Cited by 1
Introduction to Natural Product-Based Tissue Engineering
Sinha, D., Nath, R., & Borkataky, M. (2024) · Springer eBooks · doi:10.1007/978-981-97-3111-4_1 · Cited by 1
Biomimetic injectable hydrogels of gelatin and hyaluronic acid for hepatic cell culture
Rodríguez-Fernández, J. (2024) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/207128
xue, S., Su, Y., Xu, C., Xu, M., & Yao, R. (2025) · Research Square · doi:10.21203/rs.3.rs-2727920/v2
Self-citationBioprinted Perfusable Multi‐Cellular Liver Model Using Matrix Metalloproteinase ‐Degradable Hydrogel
Lu, T., Lyu, C., Shen, E. N., Berman, E. L., Sun, Y., Roy, R., Zhu, W. Z., Tang, C., & Chen, S. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202600040 · Cited by 2
3D triply periodic minimal surface gyroid hydrogel scaffolds for soft tissue engineering
Han, X., He, N., Yuan, D., Li, N., Zhu, W., Zhu, X., Li, J., Yuan, X., Wang, W., Gu, X., et al. (2026) · Nature Communications · doi:10.1038/s41467-026-73452-y · Cited by 3
“The immortalised HepG2 cell line was employed as the tumour cell component because of its high oxygen consumption and proliferative rate 50 , making it a suitable model for testing the performance limits of the gyroid scaffold.”
Du, Y., Li, J., Liu, H., Arroyo, J. P., Bo, L., Cai, B., Li, T., Wang, Z., Qiu, C., Davalos, R. V., et al. (2026) · Small · doi:10.1002/smll.74599
3D Liver Fibrosis Models in Lab: A Novel Modality for Drug Screening
Alikhani, H. K., Majidi, F., Ghasemzad, M., Shpichka, A. I., Nestorova, A., Hendi, Z., Rismani, E., Kuznetsova, D. S., Timashev, P., Vosough, M., et al. (2026) · Pharmacology Research & Perspectives · doi:10.1002/prp2.70306
“3D liver microtissues with complex cell–cell contacts are formed by multiple cell types including hepatocytes, HSCs, LSECs, and KCs [64].”
InfluentialMa, X., Cai, Z., Liu, F., Dai, Y., Jiang, R., He, J., Li, X., Lu, A., Chang, R., & Wu, J. (2026) · Pharmaceutics · doi:10.3390/pharmaceutics18111348
Metadata
- Authors
- Huang, D. (., Gibeley, S. B., Xu, C., Xiao, Y., Celik, O., Ginsberg, H. N., & Leong, K. W.
- Affiliations
- Columbia University (US)
- Columbia University Irving Medical Center (US)
- Corresponding author
- Leong, Kam W.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-02-19
- Volume
- 30
- Issue
- 44
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- PMC
- PMC7774671
- OpenAlex
- W3006725304
- Cited by
- 65
- References
- 270
- Citations by year
- 2026: 6 · 2025: 12 · 2024: 13 · 2023: 12 · 2022: 10 · 2021: 10 · 2020: 2
- FWCI
- 2.67
- Type
- journal article
- Language
- en
- Open access
- green
- europepmc.org
- Locations
- Advanced Functional Materials (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- Funders
- National Institutes of Health (TL1TR001875, UG3TR002151)
- National Heart, Lung, and Blood Institute (1R35HL135833)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Health Sciences › Medicine › Hepatology › Liver physiology and pathology
- Keywords
- liver tissue engineering, hepatocyte culture, macroencapsulation, droplet microfluidics, bioprinting, hepatic microenvironment, bioreactors, microfluidics, liver disease modeling, regenerative medicine
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.