The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Ultrasoft Liquid Metal Elastomer Foams with Positive and Negative Piezopermittivity for Tactile Sensing
Open accessAbstract
Soft, capacitive tactile (pressure) sensors are important for applications including human–machine interfaces, soft robots, and electronic skins. Such capacitors consist of two electrodes separated by a soft dielectric. Pressing the capacitor brings the electrodes closer together and thereby increases capacitance. Thus, sensitivity to a given force is maximized by using dielectric materials that are soft and have a high dielectric constant, yet such properties are often in conflict with each other. Here, a liquid metal elastomer foam (LMEF) is introduced that is extremely soft (elastic modulus 7.8 kPa), highly compressible (70% strain), and has a high permittivity. Compressing the LMEF displaces the air in the foam structure, increasing the permittivity over a large range (5.6–11.7). This is called “positive piezopermittivity.” Interestingly, it is discovered that the permittivity of such materials decreases (“negative piezopermittivity”) when compressed to large strain due to the geometric deformation of the liquid metal droplets. This mechanism is theoretically confirmed via electromagnetic theory, and finite element simulation. Using these materials, a soft tactile sensor with high sensitivity, high initial capacitance, and large capacitance change is demonstrated. In addition, a tactile sensor powered wirelessly (from 3 m away) with high power conversion efficiency (84%) is demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Yang, J. C., Mun, J., Kwon, S. Y., Park, S., Bao, Z., & Park, S. (2019) · Advanced Materials · doi:10.1002/adma.201904765 · Cited by 1,641
Self-citationPoint-of-use robotic sensors for simultaneous pressure detection and chemical analysis
Amit, M., Mishra, R. K., Hoang, Q., Galan, A. M., Wang, J., & Ng, T. N. (2019) · Materials Horizons · doi:10.1039/c8mh01412d · Cited by 57
Cited by
Ha, K., Zhang, W., Jang, H., Kang, S., Wang, L., Tan, P., Hwang, H., & Lu, N. (2021) · Advanced Materials · doi:10.1002/adma.202103320 · Cited by 354
Bai, N., Wang, L., Xue, Y., Wang, Y., Hou, X., Li, G., Zhang, Y., Cai, M., Zhao, L., Guan, F., et al. (2022) · ACS Nano · doi:10.1021/acsnano.1c10535 · Cited by 350
Shaping a Soft Future: Patterning Liquid Metals
Ma, J., Krisnadi, F., Vong, M. H., Kong, M., Awartani, O. M., & Dickey, M. D. (2023) · Advanced Materials · doi:10.1002/adma.202205196 · Cited by 311
Self-citationGallium Liquid Metal: The Devil's Elixir
Tang, S.-Y., Tabor, C., Kalantar-Zadeh, K., & Dickey, M. D. (2021) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080819-125403 · Cited by 305
Self-citationSmart Eutectic Gallium–Indium: From Properties to Applications
Zhao, Z., Soni, S., Lee, T., Nijhuis, C. A., & Xiang, D. (2023) · Advanced Materials · doi:10.1002/adma.202203391 · Cited by 300
Metadata
- Authors
- Yang, J., Tang, D., Ao, J., Ghosh, T., Neumann, T. V., Zhang, D., Piskarev, Y., Yu, T., Truong, V. K., Xie, K., Lai, Y., Li, Y., & Dickey, M. D.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2020-07-06
- Volume
- 30
- Issue
- 36
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W3039402186
- Cited by
- 233
- References
- 4
- FWCI
- 10.76
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.