In Situ Anchoring Massive Isolated Pt Atoms at Cationic Vacancies of α‐NixFe1‐x(OH)2 to Regulate the Electronic Structure for Overall Water Splitting
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Rational design and preparation of single‐atom catalysts provide a promising strategy to significantly improve the electrocatalytic activity for water splitting. In particular, single atoms anchored at cationic vacancies can enhance the stability of the catalysts and improve reaction kinetics. In this work, Pt single atoms are loaded at layered α‐Ni 2/3 Fe 1/3(OH)2 by oxidizing Fe 2+ with H 2 PtCl 6, and specifically, Pt atoms are anchored at in situ generated iron cationic vacancies during the process, resulting in stabilized Pt single atoms in the surface of α‐Ni 2/3 Fe 1/3(OH)2 with the maximum loading of ≈6.15 wt%. The Pt single atoms not only act as active sites for hydrogen evolution reaction but also regulate the electronic structure of NiFe hydroxides and activate Ni atoms adjacent to Pt for oxygen evolution reaction. Therefore, the water‐splitting electrolyzer assembled with such a bifunctional catalyst shows a smaller overpotential than that with RuO 2 and 20 wt% Pt/C catalysts as the anode and cathode, respectively, and efficient solar‐to‐hydrogen conversion. The results demonstrate the practical application of single‐atom Pt catalysts with low cost, large loading, and facile preparation route.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biesinger, M. C., Payne, B. P., Grosvenor, A. P., Lau, L. W. M., Gerson, A. R., & Smart, R. S. C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2010.10.051 · Cited by 11,640
Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives
Suen, N.-T., Hung, S.-F., Quan, Q., Zhang, N., Xu, Y.-J., & Chen, H. M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00328a · Cited by 6,307
Recent Advances in Electrocatalytic Hydrogen Evolution Using Nanoparticles
Zhu, J., Hu, L., Zhao, P., Lee, L. Y. S., & Wong, K.-Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00248 · Cited by 3,133
Zhang, J., Wu, X., Cheong, W.-C., Chen, W., Lin, R., Li, J., Zheng, L., Yan, W., Gu, L., Chen, C., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03380-z · Cited by 354
Doyle, R. L., & Lyons, M. E. G. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.015303jes · Cited by 238
Cited by
Defect engineering of two-dimensional materials for advanced energy conversion and storage
Liu, F., & Fan, Z. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00931e · Cited by 417
Recent achievements in noble metal-based oxide electrocatalysts for water splitting
Wang, F., Xiao, L., Jiang, Y., Liu, X., Zhao, X., Kong, Q., Abdukayum, A., & Hu, G. (2025) · Materials Horizons · doi:10.1039/d4mh01315h · Cited by 86
Yang, K., Huang, Y., Wang, T., Li, Y., Du, Y., Ling, J., Fan, Z., Zhang, C., & Ma, C. (2024) · Advanced Materials · doi:10.1002/adma.202409832 · Cited by 86
Sun, H., Chen, H., Humayun, M., Qiu, Y., Ju, J., Zhang, Y., Bououdina, M., Xue, X., Liu, Q., Pang, Y., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202408872 · Cited by 65
Li, Q., Sun, Z., Yin, C., Chen, Y., Pan, D., Yu, B., Zhang, Y., He, T., & Chen, S. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141492 · Cited by 44
Metadata
- Authors
- Wang, L., Zhang, L., Ma, W., Wan, H., Zhang, X., Zhang, X., Jiang, S., Zheng, J. Y., & Zhou, Z.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2022-05-16
- Volume
- 32
- Issue
- 31
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4280566678
- Cited by
- 126
- References
- 5
- FWCI
- 5.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.