The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Balancing MXene Surface Termination and Interlayer Spacing Enables Superior Microwave Absorption
Abstract
Surface chemistry and interlayer engineering determines the electrical properties of 2D MXene. However, it remains challenging to regulate the surface and interfacial chemistry of MXene simultaneously. Herein, simultaneous modulation of Ti 3 C 2 T x MXene surface termination and layer spacing by alkali treatment are achieved. The electrical and electromagnetic properties of Ti 3 C 2 T x are investigated in detail with respect to KOH and ammonia concentration dependence. A high concentration of KOH caused the Ti 3 C 2 T x layer spacing to expand to 13.7 Å and the surface O/F ratio to increase to 33.84. Because of its weaker ionization effect, ammonia provides finer tuning compared to the drastic intercalation of KOH with a thorough sweeping of the F‐containing groups. Ti 3 C 2 T x is enriched with conductive ‐OH termination after ammonia treatment, which achieves an effective balance with the increased interlayer resistance. Therefore, NH 3 H 2 O‐Ti 3 C 2 T x achieves broad‐band impedance matching and exhibits an efficient microwave loss of −49.1 dB at a low thickness of 1.7 mm, with an effective frequency bandwidth of 3.9 GHz. The results herein optimize the electrical properties of Ti 3 C 2 T x using surface and interfacial chemistry to achieve broad microwave absorption, providing a framework for enhancing the electromagnetic wave loss of intrinsic MXene.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
CoNi@SiO2@TiO2 and CoNi@Air@TiO2 Microspheres with Strong Wideband Microwave Absorption
Liu, Q., Cao, Q., Bi, H., Liang, C., Yuan, K., She, W., Yang, Y., & Che, R. (2016) · Advanced Materials · doi:10.1002/adma.201503149 · Cited by 1,947
Self-citationLiu, J., Zhang, H., Sun, R., Liu, Y., Liu, Z., Zhou, A., & Yu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201702367 · Cited by 1,819
Anomalous absorption of electromagnetic waves by 2D transition metal carbonitride Ti 3 CNT x (MXene)
Iqbal, A., Shahzad, F., Hantanasirisakul, K., Kim, M.-K., Kwon, J., Hong, J., Kim, H., Kim, D., Gogotsi, Y., & Koo, C. M. (2020) · Science · doi:10.1126/science.aba7977 · Cited by 1,511
Raman Spectroscopy Analysis of the Structure and Surface Chemistry of Ti3C2T x MXene
Sarycheva, A., & Gogotsi, Y. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00359 · Cited by 1,467
Control of MXenes’ electronic properties through termination and intercalation
Hart, J. L., Hantanasirisakul, K., Lang, A. C., Anasori, B., Pinto, D., Pivak, Y., van Omme, J. T., May, S. J., Gogotsi, Y., & Taheri, M. L. (2019) · Nature Communications · doi:10.1038/s41467-018-08169-8 · Cited by 1,342
Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)
Hantanasirisakul, K., & Gogotsi, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804779 · Cited by 1,325
Dimensional Design and Core–Shell Engineering of Nanomaterials for Electromagnetic Wave Absorption
Wu, Z., Cheng, H., Jin, C., Yang, B., Xu, C., Pei, K., Zhang, H., Yang, Z., & Che, R. (2022) · Advanced Materials · doi:10.1002/adma.202107538 · Cited by 1,059
Self-citationModified MAX Phase Synthesis for Environmentally Stable and Highly Conductive Ti 3 C 2 MXene
Mathis, T. S., Maleski, K., Goad, A., Sarycheva, A., Anayee, M., Foucher, A. C., Hantanasirisakul, K., Shuck, C. E., Stach, E. A., & Gogotsi, Y. (2021) · ACS Nano · doi:10.1021/acsnano.0c08357 · Cited by 1,001
Han, M., Yin, X., Wu, H., Hou, Z., Song, C., Li, X., Zhang, L., & Cheng, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06455 · Cited by 996
Ma, Z., Kang, S., Ma, J., Shao, L., Zhang, Y., Liu, C., Wei, A., Xiang, X., Wei, L., & Gu, J. (2020) · ACS Nano · doi:10.1021/acsnano.0c02401 · Cited by 884
Electromagnetic absorption materials: Current progress and new frontiers
Lv, H., Yang, Z., Pan, H., & Wu, R. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100946 · Cited by 837
Lian, P., Dong, Y., Wu, Z.-S., Zheng, S., Wang, X., Wang, S., Sun, C., Qin, J., Shi, X., & Bao, X. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.002 · Cited by 712
Surface Termination Dependent Work Function and Electronic Properties of Ti3C2Tx MXene
Schultz, T., Frey, N. C., Hantanasirisakul, K., Park, S., May, S. J., Shenoy, V. B., Gogotsi, Y., & Koch, N. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00414 · Cited by 712
A Review on MXene Synthesis, Stability, and Photocatalytic Applications
Murali, G., Reddy Modigunta, J. K., Park, Y. H., Lee, J.-H., Rawal, J., Lee, S.-Y., In, I., & Park, S.-J. (2022) · ACS Nano · doi:10.1021/acsnano.2c04750 · Cited by 668
Hu, T., Wang, J., Zhang, H., Li, Z., Hu, M., & Wang, X. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05666c · Cited by 652
Schottky-Barrier-Free Contacts with Two-Dimensional Semiconductors by Surface-Engineered MXenes
Liu, Y., Xiao, H., & Goddard, W. A. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10834 · Cited by 652
Fast Gelation of Ti3C2Tx MXene Initiated by Metal Ions
Deng, Y., Shang, T., Wu, Z., Tao, Y., Luo, C., Liang, J., Han, D., Lyu, R., Qi, C., Lv, W., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902432 · Cited by 602
Khazaei, M., Arai, M., Sasaki, T., Ranjbar, A., Liang, Y., & Yunoki, S. (2015) · Physical Review B · doi:10.1103/physrevb.92.075411 · Cited by 516
Zhao, B., Du, Y., Yan, Z., Rao, L., Chen, G., Yuan, M., Yang, L., Zhang, J., & Che, R. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202209924 · Cited by 493
Self-citationWen, C., Li, X., Zhang, R., Xu, C., You, W., Liu, Z., Zhao, B., & Che, R. (2022) · ACS Nano · doi:10.1021/acsnano.1c08957 · Cited by 456
Self-citationTitanium carbide (MXene) nanosheets as promising microwave absorbers
Qing, Y., Zhou, W., Luo, F., & Zhu, D. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.07.150 · Cited by 415
Li, M., Li, X., Qin, G., Luo, K., Lu, J., Li, Y., Liang, G., Huang, Z., Zhou, J., Hultman, L., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c07972 · Cited by 414
Self-citationZhu, X., Liu, B., Hou, H., Huang, Z., Zeinu, K. M., Huang, L., Yuan, X., Guo, D., Hu, J., & Yang, J. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.07.084 · Cited by 388
MXetronics: Electronic and photonic applications of MXenes
Kim, H., Wang, Z., & Alshareef, H. N. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.03.020 · Cited by 372
Zhao, S., Li, Z., & Yang, J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5065125 · Cited by 353
Liang, L., Yang, R., Han, G., Feng, Y., Zhao, B., Zhang, R., Wang, Y., & Liu, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b18504 · Cited by 309
Self-citationAlkali treated Ti3C2Tx MXenes and their dye adsorption performance
Wei, Z., Peigen, Z., Wubian, T., Xia, Q., Yamei, Z., & ZhengMing, S. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.12.034 · Cited by 262
Deng, B., Liu, Z., Pan, F., Xiang, Z., Zhang, X., & Lü, W. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta10551a · Cited by 247
Zhao, G., Lv, H., Zhou, Y., Zheng, X., Wu, C., & Xu, C. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b16727 · Cited by 236
He, P., Cao, M.-S., Shu, J.-C., Cai, Y.-Z., Wang, X.-X., Zhao, Q.-L., & Yuan, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00593 · Cited by 229
Jing, H., Yeo, H., Lyu, B., Ryou, J., Choi, S., Park, J.-H., Lee, B. H., Kim, Y.-H., & Lee, S. (2021) · ACS Nano · doi:10.1021/acsnano.0c08664 · Cited by 220
A controllable heterogeneous structure and electromagnetic wave absorption properties of Ti2CTxMXene
Li, X., Yin, X., Han, M., Song, C., Sun, X., Xu, H., Cheng, L., & Zhang, L. (2017) · J. Mater. Chem. C · doi:10.1039/c7tc01991b · Cited by 214
Electrochemically modulated interaction of MXenes with microwaves
Han, M., Zhang, D., Shuck, C. E., McBride, B., Zhang, T., Wang, R., Shevchuk, K., & Gogotsi, Y. (2023) · Nature Nanotechnology · doi:10.1038/s41565-022-01308-9 · Cited by 207
Simultaneously tuning interlayer spacing and termination of MXenes by Lewis-basic halides
Zhang, T., Chang, L., Zhang, X., Wan, H., Liu, N., Zhou, L., & Xiao, X. (2022) · Nature Communications · doi:10.1038/s41467-022-34569-y · Cited by 205
Liu, P., Zhang, G., Xu, H., Cheng, S., Huang, Y., Ouyang, B., Qian, Y., Zhang, R., & Che, R. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202211298 · Cited by 196
Self-citationDeng, Z., Tang, P., Wu, X., Zhang, H.-B., & Yu, Z.-Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02059 · Cited by 188
Xu, C., Liu, P., Wu, Z., Zhang, H., Zhang, R., Zhang, C., Wang, L., Wang, L., Yang, B., Yang, Z., et al. (2022) · Advanced Science · doi:10.1002/advs.202200804 · Cited by 175
Self-citationZhang, Q., Fan, R., Cheng, W., Ji, P., Sheng, J., Liao, Q., Lai, H., Fu, X., Zhang, C., & Li, H. (2022) · Advanced Science · doi:10.1002/advs.202202748 · Cited by 163
Du, Y., Xu, J. F., Fang, J., Zhang, Y., Liu, X., Zuo, P., & Zhuang, Q. (2022) · Journal of Materials Chemistry A · doi:10.1039/d1ta11025j · Cited by 140
Self-citationMa, W., He, P., Wang, T., Xu, J. F., Liu, X., Zhuang, Q., Cui, Z., & Lin, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129875 · Cited by 123
Remove the –F Terminal Groups on Ti3C2Tx by Reaction with Sodium Metal to Enhance Pseudocapacitance
Hu, X., Zhang, Q., Gong, N., Chen, X., Wang, L., Peng, W., Li, Y., Zhang, F., & Fan, X. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.06.028 · Cited by 39
Xu, J. F., Ma, W., He, P., Zhou, Y., Liu, X., Chen, Y., Zuo, P., & Zhuang, Q. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta07718c · Cited by 33
Makaryan, T., Okada, Y., Kondo, H., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202209538 · Cited by 7
Metadata
- Authors
- Du, Y., Yan, Z., You, W., Men, Q., Chen, G., Lv, X., Wu, Y., Luo, K., Zhao, B., Zhang, J., & Che, R.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2023-05-22
- Volume
- 33
- Issue
- 34
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4377823278
- Cited by
- 282
- References
- 47
- FWCI
- 16.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.