3D Printed Implantable Hydrogel Bioelectronics for Electrophysiological Monitoring and Electrical Modulation
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Electronic devices based on conducting polymer hydrogels have emerged as one of the most promising implantable bioelectronics for electrophysiological monitoring and diagnosis of a wide spectrum of diseases, in light of their distinct conductivity and biocompatibility. However, most conducting polymer hydrogels‐based bioelectronics are routinely fabricated through conventional techniques, which are challenged by its intrinsic poor processability of conducting polymers, as well as the essentially fragile biointerface, thus hampering their rapid innovation and application in advanced implantable bioelectronics. Here, 3D printable hydrogels based on poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is reported, featuring superior 3D printability for direct ink writing (DIW), tissue‐like mechanical compliance (Young's modulus of 650 kPa), instant and tough bioadhesion (interfacial toughness of 200 J m−2 and shear strength of 120 kPa), highly‐tunable electrical properties, as well as long‐term in vitro and in vivo structural and electrochemical robustness. Electro‐physiological studies rat heart models with normal or arrhythmic conditions highlight the capabilities of establishing conformal biointerface with the dynamic organs, allowing for long‐term and high‐precision spatiotemporary epicardial electrophysiological monitoring, as well as electrical modulation of acute myocardial infarction (MI) model. These advances provide a promising strategy to improve the tissue‐electronics interfacing, and could serve as the basis for the next generation bioelectronics toward healthcare monitoring, diagnosis and medical therapies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The rise of plastic bioelectronics
Someya, T., Bao, Z., & Malliaras, G. G. (2016) · Nature · doi:10.1038/nature21004 · Cited by 1,884
Bariya, M., Nyein, H. Y. Y., & Javey, A. (2018) · Nature Electronics · doi:10.1038/s41928-018-0043-y · Cited by 1,486
Liu, X., Liu, J., Lin, S., & Zhao, X. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.026 · Cited by 1,023
Self-citationXu, L., Gutbrod, S. R., Bonifas, A. P., Su, Y., Sulkin, M. S., Lu, N., Chung, H.-J., Jang, K.-I., Liu, Z., Ying, M., et al. (2014) · Nature Communications · doi:10.1038/ncomms4329 · Cited by 634
Tissue–electronics interfaces: from implantable devices to engineered tissues
Feiner, R., & Dvir, T. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.76 · Cited by 595
Feig, V. R., Tran, H., Lee, M., & Bao, Z. (2018) · Nature Communications · doi:10.1038/s41467-018-05222-4 · Cited by 585
Sim, K., Rao, Z., Zou, Z., Ershad, F., Lei, J., Thukral, A., Chen, J., Huang, Q.-A., Xiao, J., & Yu, C. (2019) · Science Advances · doi:10.1126/sciadv.aav9653 · Cited by 305
Metadata
- Authors
- Wang, F., Xue, Y., Chen, X., Zhang, P., Shan, L., Duan, Q., Xing, J., Lan, Y., Lu, B., & Liu, J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2023-12-21
- Volume
- 34
- Issue
- 21
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4390062874
- Cited by
- 159
- References
- 7
- FWCI
- 11.84
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Printed Implantable Hydrogel Bioelectronics for Electrophysiological Monitoring and Electrical Modulation. https://app.cochat.ai/papers/10.1002/adfm.202314471
- The paper
- Wang, F., Xue, Y., Chen, X., Zhang, P., Shan, L., Duan, Q., Xing, J., Lan, Y., Lu, B., & Liu, J. (2024). 3D Printed Implantable Hydrogel Bioelectronics for Electrophysiological Monitoring and Electrical Modulation. Advanced Functional Materials. https://doi.org/10.1002/adfm.202314471
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.