3D cell printing of functional skeletal muscle constructs using skeletal muscle-derived bioink
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Engineered skeletal muscle tissues that mimic the structure and function of native muscle have been considered as an alternative strategy for the treatment of various muscular diseases and injuries. Here, it is demonstrated that 3D cell-printing of decellularized skeletal muscle extracellular matrix (mdECM)-based bioink facilitates the fabrication of functional skeletal muscle constructs. The cellular alignment and the shape of the tissue constructs are controlled by 3D cell-printing technology. mdECM bioink provides the 3D cell-printed muscle constructs with a myogenic environment that supports high viability and contractility as well as myotube formation, differentiation, and maturation. More interestingly, the preservation of agrin is confirmed in the mdECM, and significant increases in the formation of acetylcholine receptor clusters are exhibited in the 3D cell-printed muscle constructs. In conclusion, mdECM bioink and 3D cell-printing technology facilitate the mimicking of both the structural and functional properties of native muscle and hold great promise for producing clinically relevant engineered muscle for the treatment of muscular injuries.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Recent progress in 3D bioprinting holds significant promise for addressing VML by enabling the fabrication of complex muscle tissue constructs with precise control over architecture and composition [8, 9].”
From Development of silk microfiber-reinforced bioink for muscle tissue engineering and in situ printing by a handheld 3D printer (2025) · cites this paper as [8]
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
The extracellular matrix at a glance
Frantz, C., Stewart, K. M., & Weaver, V. M. (2010) · Journal of Cell Science · doi:10.1242/jcs.023820 · Cited by 4,334
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
Cellular and Molecular Regulation of Muscle Regeneration
CHARGÉ, S. B. P., & RUDNICKI, M. A. (2004) · Physiological Reviews · doi:10.1152/physrev.00019.2003 · Cited by 2,680
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Self-citationStructure and function of the skeletal muscle extracellular matrix
Gillies, A. R., & Lieber, R. L. (2011) · Muscle & Nerve · doi:10.1002/mus.22094 · Cited by 1,021
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
O'Leary, L. E. R., Fallas, J. A., Bakota, E. L., Kang, M. K., & Hartgerink, J. D. (2011) · Nature Chemistry · doi:10.1038/nchem.1123 · Cited by 667
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Self-citation
Cited by
Items 101–200 of 300
Thangadurai, M., Ajith, A., Budharaju, H., Sethuraman, S., & Sundaramurthi, D. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213135 · Cited by 61
Boso, D., Maghin, E., Carraro, E., Giagante, M., Pavan, P. G., & Piccoli, M. (2020) · Materials · doi:10.3390/ma13112483 · Cited by 63
“Moreover, high myogenic gene expression of C2C12 encapsulated into the dECM was observed at day 14 after differentiation induction, together with the preservation of ECM components and agrin, which allows the prepatterning of acetylcholine receptors [81].”
BackgroundSchätzlein, E., & Blaeser, A. (2022) · Communications Biology · doi:10.1038/s42003-022-03593-5 · Cited by 62
Developments with 3D bioprinting for novel drug discovery
Satpathy, A., Datta, P., Wu, Y. B., Ayan, B., Bayram, E., & Ozbolat, I. T. (2018) · Expert Opinion on Drug Discovery · doi:10.1080/17460441.2018.1542427 · Cited by 63
Krishtul, S., Baruch, L., & Machluf, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900386 · Cited by 59
Kim, W.-J., & Kim, G. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100588 · Cited by 61
Advanced Techniques for Skeletal Muscle Tissue Engineering and Regeneration
Kang, M. S., Lee, S. H., Park, W. J., Lee, J. E., Kim, B., & Han, D. (2020) · Bioengineering · doi:10.3390/bioengineering7030099 · Cited by 58
“introduced skeletal-muscle-tissue-derived dECM)bioinks possessing native ECM components, such as collagen, glycosaminoglycans (GAGs), and growth factors [36].”
Background3D Printed Calcium Phosphate Cement (CPC) Scaffolds for Anti-Cancer Drug Delivery
Wu, Y., Woodbine, L. J., Carr, A. M., Pillai, A. R., Nokhodchi, A., & Maniruzzaman, M. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12111077 · Cited by 61
“, 3D aligned-muscle constructs with PCL-geometrical constraints were also created by the same technique [6].”
MethodIdaszek, J., Volpi, M., Paradiso, A., Nguyen Quoc, M., Górecka, Ż., Klak, M., Tymicki, G., Berman, A., Wierzbicki, M., Jaworski, S., et al. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00163 · Cited by 53
3D Bioprinted Patient‐Specific Extracellular Matrix Scaffolds for Soft Tissue Defects
Behre, A., Tashman, J. W., Dikyol, C., Shiwarski, D. J., Crum, R. J., Johnson, S. A., Kommeri, R., Hussey, G. S., Badylak, S. F., & Feinberg, A. W. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200866 · Cited by 58
Decellularized extracellular matrix bioinks and their application in skin tissue engineering
Khoshnood, N., & Zamanian, A. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00095 · Cited by 53
3D in vitro models of skeletal muscle: myopshere, myobundle and bioprinted muscle construct
Dessauge, F., Schleder, C., Perruchot, M., & Rouger, K. (2021) · Veterinary Research · doi:10.1186/s13567-021-00942-w · Cited by 56
Zhe, M., Wu, X., Yu, P., Xu, J., Liu, M., Yang, G., Xiang, Z., Xing, F., & Ritz, U. (2023) · Materials · doi:10.3390/ma16083197 · Cited by 58
“These features suggested that, prior to implantation, the mdECM bioink may be utilized to design and create a real architecture of injured muscle mass and the constructs could provide cells with a realistic-like microenvironment, facilitating tissue development and maturation [174].”
BackgroundMethodDecellularized extracellular matrix materials for treatment of ischemic cardiomyopathy
Liu, W., Zhang, X., Jiang, X., Dai, B., Zhang, L., & Zhu, Y. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.10.015 · Cited by 43
“Accordingly, 1 – 2% is the optimized dECM concentration balancing pros and cons [196,244].”
BackgroundDickman, C. T. D., Russo, V., Thain, K., Pan, S., Beyer, S. T., Walus, K., Getsios, S., Mohamed, T., & Wadsworth, S. J. (2020) · The FASEB Journal · doi:10.1096/fj.201901063rr · Cited by 52
3D Cell Printing of Tissue/Organ-Mimicking Constructs for Therapeutic and Drug Testing Applications
Kim, J., Kong, J. S., Han, W., Kim, B. S., & Cho, D. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21207757 · Cited by 54
“Since each material has distinct properties, the optimal printing condition can be adjusted for each material, expanding the ability to print a wide range of materials for biomimetic tissue constructs [92,93].”
BackgroundSelf-citationIn vitro strategies for mimicking dynamic cell–ECM reciprocity in 3D culture models
Urciuolo, F., Imparato, G., & Netti, P. A. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1197075 · Cited by 53
3D Bioprinting: Recent Trends and Challenges
Chameettachal, S., Yeleswarapu, S., Sasikumar, S., Shukla, P., Hibare, P., Bera, A. K., Bojedla, S. S. R., & Pati, F. (2019) · Journal of the Indian Institute of Science · doi:10.1007/s41745-019-00113-z · Cited by 57
Piezoelectric nanocomposite bioink and ultrasound stimulation modulate early skeletal myogenesis
Paci, C., Iberite, F., Arrico, L., Vannozzi, L., Parlanti, P., Gemmi, M., & Ricotti, L. (2022) · Biomaterials Science · doi:10.1039/d1bm01853a · Cited by 49
Barajaa, M. A., Ghosh, D., & Laurencin, C. T. (2023) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-023-00328-8 · Cited by 49
“Choi et al. fabricated a 3D-bioprinted construct made entirely from dsmECM-derived bioink [207].”
3D Graphene Scaffolds for Skeletal Muscle Regeneration: Future Perspectives
Palmieri, V., Sciandra, F., Bozzi, M., Spirito, M. D., & Papi, M. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00383 · Cited by 50
“PU bioink with muscle cells can be co-printed with fibroblastcontaining PCL to obtain differentiated stiffness and also stimulate tissue development and differentiation (Merceron et al., 2015; Choi et al., 2016).”
Controllable assembly of skeletal muscle-like bundles through 3D bioprinting
Fan, T., Wang, S., Jiang, Z., Ji, S., Cao, W., Liu, W., Ji, Y., Li, Y., Shyh‐Chang, N., & Gu, Q. (2021) · Biofabrication · doi:10.1088/1758-5090/ac3aca · Cited by 54
“The higher orientation of cells could be observed in finer 3D printed bundles [55].”
BackgroundDecellularization Strategies for Regenerating Cardiac and Skeletal Muscle Tissues
Tan, Y. H., Helms, H. R., & Nakayama, K. H. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.831300 · Cited by 50
“To mimic the native structure of muscle, Choi et al. 3D printed muscle scaffolds using dECM bioinks (Choi et al., 2016).”
BackgroundMethodResultInfluentialShimojo, A. A. M., Rodrigues, I. C. P., Perez, A. G. M., Souto, E. B., Gabriel, L. P., & Webster, T. J. (2020) · Springer eBooks · doi:10.1007/978-3-030-34471-9_23 · Cited by 56
Bolívar‐Monsalve, E. J., Ceballos‐González, C. F., Chávez-Madero, C., de la Cruz‐Rivas, B. G., Velásquez‐Marín, S., Mora‐Godínez, S., Reyes‐Cortés, L. M., Khademhosseini, A., Weiss, P. S., Samandari, M., et al. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200448 · Cited by 48
3D Miniaturization of Human Organs for Drug Discovery
Park, J., Wetzel, I., Dréau, D., & Cho, H. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700551 · Cited by 48
Self-citationBioinspired Three-Dimensional Human Neuromuscular Junction Development in Suspended Hydrogel Arrays
Dixon, T. A., Cohen, E., Cairns, D. M., Gómez-Rodríguez, M. J., Mathews, J., Jose, R. R., & Kaplan, D. L. (2018) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2018.0062 · Cited by 49
“Over recent years, human and animal aneural 3D muscle cultures have developed significantly, using diverse techniques, including hydrogel casting around flotation bars(21) and cantilevers,(22) stacking tissue sheets,(23) coculturing with endothelial cells,(24) and printing cell-laden extracellular inks.(25,26) To prov…”
BackgroundPrasopthum, A., Deng, Z., Khan, I. M., Yin, Z., Guo, B., & Yang, J. (2020) · Biomaterials Science · doi:10.1039/d0bm00621a · Cited by 44
Baiguera, S., Gaudio, C. D., Nardo, P. D., Manzari, V., Carotenuto, F., & Teodori, L. (2020) · BioMed Research International · doi:10.1155/2020/2689701 · Cited by 45
“prepared a bioink including porcine SM dECM and C2C12 myoblasts to be processed by means of in-house developed 3D cellprinting system [71].”
BackgroundMethodPien, N., Krzyslak, H., Kallaje, S. S., Meerssche, J. V., Mantovani, D., Schauwer, C. D., Dubruel, P., Vlierberghe, S. V., & Pennisi, C. P. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101737 · Cited by 47
Chae, S., Choi, Y., & Cho, D. (2022) · Biofabrication · doi:10.1088/1758-5090/ac4fb6 · Cited by 41
Self-citationBiofabrication's Contribution to the Evolution of Cultured Meat
Albrecht, F. B., Ahlfeld, T., Klatt, A., Heine, S., Gelinsky, M., & Kluger, P. J. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202304058 · Cited by 41
Li, D., Li, S., He, S., He, H., Yuan, G., Ma, B., Zhang, Y., Yuan, C., Liu, Z., Deng, Z., et al. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.01.016 · Cited by 40
“The Young ’ s modulus of the bioprinted skeletal muscle dECM scaffold was markedly superior to that of the collagen I control [49].”
Choi, Y.-J., Park, S. J., Yi, H.-G., Lee, H., Kim, D. S., & Cho, D.-W. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01475b · Cited by 39
Self-citationJiwlawat, N., Lynch, E. M., Napiwocki, B. N., Stempien, A., Ashton, R. S., Kamp, T. J., Crone, W. C., & Suzuki, M. (2019) · Biotechnology and Bioengineering · doi:10.1002/bit.27075 · Cited by 43
Bandyopadhyay, A., Dewangan, V. K., Vajanthri, K. Y., Poddar, S., & Mahto, S. K. (2017) · Journal of Applied Biomedicine · doi:10.1016/j.bbe.2017.12.001 · Cited by 36
Neuromuscular disease modeling on a chip
Santoso, J. W., & McCain, M. L. (2020) · Disease Models & Mechanisms · doi:10.1242/dmm.044867 · Cited by 36
“Newer technologies, such as 3D bioprinting, which is a form of additive manufacturing that uses cells and other biomaterials as ‘inks’ to print living structures (Choi et al., 2016; Costantini et al., 2017b; Kang et al., 2016; Kim et al., 2020), will probably further advance these models.”
BackgroundBarthold, J. E., McCreery, K. P., Martinez, J., Bellerjeau, C., Ding, Y., Bryant, S. J., Whiting, G. L., & Neu, C. P. (2022) · Biofabrication · doi:10.1088/1758-5090/ac584c · Cited by 36
“…to co-print hydrogel solutions (either synthetic or natural) embedded with cells sourced from unique layers of cartilage/bone [48–50], print a scaffold with growth factor gradients to enable layer specific cell development [51, 52], and even printed digested ECM inks laden with cells [18, 53, 54].”
Novel ultrashort self-assembling peptide bioinks for 3D culture of muscle myoblast cells
Arab, W. T., Rauf, S., Alharbi, O. M., & Hauser, C. A. E. (2018) · International Journal of Bioprinting · doi:10.18063/ijb.v4i1.129 · Cited by 35
Serna, J. A., Rueda-Gensini, L., Céspedes-Valenzuela, D. N., Cifuentes, J., Cruz, J. C., & Muñoz-Camargo, C. (2021) · Polymers · doi:10.3390/polym13193263 · Cited by 36
“This generated a longitudinal constant strain by opposing hydrogel compaction during the maturation process [94].”
BackgroundReview in edible materials for sustainable cultured meat: scaffolds and microcarriers production
Moslemy, N., Sharifi, E., Asadi‐Eydivand, M., & Abolfathi, N. (2023) · International Journal of Food Science & Technology · doi:10.1111/ijfs.16703 · Cited by 35
Liu, T., Huang, R., Zhong, J., Yang, Y., Tan, Z., & Tan, W. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00377c · Cited by 36
Decellularized matrix as a building block in bioprinting and electrospinning
Santschi, M., Vernengo, A., Eglin, D., D'Este, M., & Wuertz-Kozak, K. (2019) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2019.05.003 · Cited by 34
Bioprinting stem cells: building physiological tissues one cell at a time
Scognamiglio, C., Soloperto, A., Ruocco, G., & Cidonio, G. (2020) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00124.2020 · Cited by 35
“Skeletal muscle C2C12 Porcine muscle dECM bioink and PCL support Formation of AChR, Myogenic differentiation and contractility (23)”
BackgroundReview on novel biomaterials and innovative 3D printing techniques in biomedical applications
Pradeep, P. V., & Paul, L. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.01.072 · Cited by 38
Cheng, Y.-J., Wu, T.-H., Tseng, Y., & Chen, W. (2024) · Biofabrication · doi:10.1088/1758-5090/ad1b20 · Cited by 34
Qi, L., Zhang, F., Wang, K., Chen, B., Li, X., Xu, J. R., Sun, J., Liu, B., Gao, Z., Ji, Y., et al. (2025) · Regenerative Biomaterials · doi:10.1093/rb/rbaf050 · Cited by 36
“The muscle decellularized ECM (mdECM) bio-ink and 3D cell printing technology will provide appropriate muscle tissue structure [198].”
Engineered Tissue Development in Biofabricated 3D Geometrical Confinement–A Review
Chen, Z., & Zhao, R. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01195 · Cited by 34
Laude, M., Kolliopoulos, V., Mikos, A. G., White, L. J., & Cosgriff‐Hernandez, E. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202502107 · Cited by 37
3D Bioprinting for Musculoskeletal Applications
Popov, A., Malferrari, S., & Kalaskar, D. M. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0004 · Cited by 33
Moyle, L. A., Jacques, E., & Gilbert, P. M. (2020) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2020.05.006 · Cited by 32
Biomimetic bioinks of nanofibrillar polymeric hydrogels for 3D bioprinting
Wang, Y., Li, J., Li, Y., & Yang, B. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101180 · Cited by 35
Pham‐Nguyen, O., Son, Y. J., Kwon, T., Kim, J., Jung, Y. C., Park, J. B., Kang, B., & Yoo, H. S. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202002228 · Cited by 32
Self-citationMa, H., Xing, F., Yu, P., Xu, J., Wu, X., Luo, R., Xiang, Z., Rommens, P. M., Duan, X., & Ritz, U. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111591 · Cited by 29
The Prospect of Hepatic Decellularized Extracellular Matrix as a Bioink for Liver 3D Bioprinting
Shi, W. T., Zhang, Z., & Wang, X. (2024) · Biomolecules · doi:10.3390/biom14081019 · Cited by 29
“Currently, dECM bioinks have been used to produce a variety of organs, such as the heart, liver [42], adipose tissue, cartilage, skeletal muscle [82], skin, and vascular tissue.”
BackgroundKim, J. H., Choi, Y., Yi, H., Wang, J. H., Cho, D., & Jeong, Y. H. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa7b51 · Cited by 29
Self-citationSelf-healing, 3D printed bioinks from self-assembled peptide and alginate hybrid hydrogels
Field, E. H., Ratcliffe, J., Johnson, C. J., Binger, K. J., & Reynolds, N. P. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.214145 · Cited by 29
Emerging advancements in 3D food printing
Prithviraj, V., Puente-Diaz, L., Lemus-Mondaca, R. A., Ullah, A., & Roopesh, M. S. (2025) · Frontiers in Food Science and Technology · doi:10.3389/frfst.2025.1607449 · Cited by 34
Zhao, K.-Y., Du, Y., Cao, H., Su, L., Su, X., & Li, X. (2024) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2024.114435 · Cited by 31
Decellularized Extracellular Matrix as a Potent Natural Biomaterial for Regenerative Medicine
Sadrabadi, A. E., Baei, P., Hosseini, S., & Eslaminejad, M. B. (2020) · Advances in experimental medicine and biology · doi:10.1007/5584_2020_504 · Cited by 28
New Insights into the Application of 3D-Printing Technology in Hernia Repair
Kohler, B., Martínez, S. B., Gómez‐Gil, V., Rodríguez, M., Pascual, G., & Bellón, J. M. (2021) · Materials · doi:10.3390/ma14227092 · Cited by 30
Chae, S., & Cho, D. (2022) · MRS Bulletin · doi:10.1557/s43577-021-00260-8 · Cited by 28
Self-citationBakırcı, E., Guenat, O. T., Ahmad, S. S., & Gantenbein, B. (2022) · European Cells and Materials · doi:10.22203/ecm.v044a02 · Cited by 28
“The beneficial effects of PRP are demonstrated on ACL-derived LC in vitro (Cheng et al., 2012; Fufa et al., 2008; Krismer et al., 2017; Mastrangelo et al., 2011; Murray et al., 2009; Yoshida et al., 2014).”
BackgroundMuscle fibrosis in the soft palate: Delivery of cells, growth factors and anti-fibrotics
den Hoff, J. W. V., Monroy, P. L. C., Ongkosuwito, E. M., Kuppevelt, T. H. V., & Daamen, W. F. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.08.002 · Cited by 28
Zhang, B., Gao, L., Gu, L., Yang, H., Luo, Y., & Ma, L. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.04.017 · Cited by 30
3D in vitro Models of Pathological Skeletal Muscle: Which Cells and Scaffolds to Elect?
Carraro, E., Rossi, L., Maghin, E., Canton, M., & Piccoli, M. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.941623 · Cited by 25
“In this research field, the new trend is the use of tissue specific ECM-derived hydrogels based on SkM decellularized ECM as reported by several authors (Choi et al., 2016; Lee et al., 2020).”
MethodMin, K., Kong, J. S., Kim, J., Kim, J., Gao, G., Cho, D., & Han, H. H. (2022) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c01142 · Cited by 24
Self-citationPérez-Cortez, J. E., Sánchez-Rodríguez, V. H., Gallegos-Martínez, S., Chuck‐Hernández, C., Rodriguez, C. A., Álvarez, M. M., Santiago, G. T., Vázquez, E., & Martínez-López, J. I. (2022) · Micromachines · doi:10.3390/mi14010055 · Cited by 24
“Cell alignment is an essential parameter in the tissue engineering field, for ex‐ ample, in creating muscular cell patterns to mimic natural muscle fibers [43,44].”
BackgroundFu, Q., le Zhang, K., Fang, Z. W., Yang, M., Liu, M., Yang, R., Wang, Y., Yang, X. R., & Wang, Y. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15061700 · Cited by 25
Control of cell growth on 3D‐printed cell culture platforms for tissue engineering
Tan, Z., Liu, T., Zhong, J., Yang, Y., & Tan, W. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36188 · Cited by 25
Shapiro, L., Elsangeedy, E., Lee, H., Atala, A., Yoo, J. J., Lee, S. J., & Ju, Y. M. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab229d · Cited by 24
Nano‐ and Microfabrication for Engineering Native‐Like Muscle Tissues
Gao, L., Ma, L., Yin, X., Luo, Y., Yang, H., & Zhang, B. (2020) · Small Methods · doi:10.1002/smtd.201900669 · Cited by 24
Potential Synergistic Effects of Stem Cells and Extracellular Matrix Scaffolds
Gaffney, L. S., Wrona, E. A., & Freytes, D. O. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00083 · Cited by 23
Emerging tissue engineering strategies for the corneal regeneration
Tafti, M. F., Aghamollaei, H., Moghaddam, M. M., Jadidi, K., ALIO, J. L., & Faghihi, S. (2022) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.3309 · Cited by 24
Three-Dimensional Bioprinting in Soft Tissue Engineering for Plastic and Reconstructive Surgery
Bülow, A., Schäfer, B., & Beier, J. P. (2023) · Bioengineering · doi:10.3390/bioengineering10101232 · Cited by 24
“Choi et al. [48] used a hydrogel as a bioink derived from porcine skeletal muscle tissue.”
BackgroundEngineering Heterogeneous Tumor Models for Biomedical Applications
Wu, Z., Huang, D., Wang, J., Zhao, Y., Sun, W., & Shen, X. (2023) · Advanced Science · doi:10.1002/advs.202304160 · Cited by 25
Fischer, E. O., Tsukerman, A., Machour, M., Shuhmaher, M., Silverstein, A., Yaakov, M., Bar‐Am, O., Debbi, L., & Levenberg, S. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202404542 · Cited by 21
Bioprinting and Biofabrication with Peptide and Protein Biomaterials
Boyd‐Moss, M., Fox, K. E., Brandt, M., Nisbet, D. R., & Williams, R. J. (2017) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-66095-0_5 · Cited by 23
“2010), muscular (Choi et al. 2016), and neural tissue constructs (England et al.”
BackgroundMethodInfluentialYong, U., Lee, S., Jung, S., & Jang, J. (2020) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/abb211 · Cited by 21
Bioprinting: A promising approach for tissue regeneration
França, F. S., dos Santos, M. G., Prestes, J. P., Alcantara, B. J., Borges, M. F., & Pranke, P. H. L. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00130 · Cited by 21
Zschüntzsch, J., Meyer, S., Shahriyari, M., Kummer, K., Schmidt, M., Kummer, S., & Tiburcy, M. (2022) · Cells · doi:10.3390/cells11071233 · Cited by 24
“[174] were able to demonstrate, using decellularized skeletal muscle extracellular matrix (mdECM)-based bioink, that bioprinting allows the development of constructs possessing functional as well as structural features of skeletal muscle.”
BackgroundCellulose Bio–ink on 3D Printing Applications
Ganpisetti, R., & Lalatsa, A. (2021) · Journal of Young Pharmacists · doi:10.5530/jyp.2021.13.1 · Cited by 20
Merotto, E., Pavan, P. G., & Piccoli, M. (2023) · Biomedicines · doi:10.3390/biomedicines11061742 · Cited by 21
“In particular, dECM is one of the few natural biomaterials that is commonly used as a bioink on its own (Figure 1) and has been used to produce a variety of tissues, including the heart [103], skin [104], liver [105], intestine [106], bone [107], and skeletal muscle [108].”
BackgroundTissue/Organ-Derived Bioink Formulation for 3D Bioprinting
Chameettachal, S., Sasikumar, S., Sethi, S., Yeleswarapu, S., & Pati, F. (2019) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2018-0024 · Cited by 20
Replace and repair: Biomimetic bioprinting for effective muscle engineering
Blake, C., Massey, O., Boyd‐Moss, M., Firipis, K., Rifai, A., Franks, S. J., Quigley, A. F., Kapsa, R. M. I., Nisbet, D. R., & Williams, R. J. (2021) · APL Bioengineering · doi:10.1063/5.0040764 · Cited by 20
Recent Trends in Biofabrication Technologies for Studying Skeletal Muscle Tissue-Related Diseases
Cho, S., & Jang, J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.782333 · Cited by 20
“Choi et al. (2016) induced uniaxial muscle cell alignment by depositing polycaprolactone (PCL) anchors as a geometric constraint at both ends of the muscle construct (Figure 1B).”
BackgroundMethodInfluentialCakal, S. D., Radeke, C., Alcala, J. F., Ellman, D. G., Butdayev, S., Andersen, D. C., Calløe, K., & Lind, J. U. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac6b71 · Cited by 19
Fabricating Muscle–Neuron Constructs with Improved Contractile Force Generation
Arifuzzaman, M., Itô, A., Ikeda, K., Kawabe, Y., & Kamihira, M. (2018) · Tissue Engineering Part A · doi:10.1089/ten.tea.2018.0165 · Cited by 18
“11 One promising approach for the fabrication of functional muscle tissue constructs is magnetic force-based tissue engineering (Mag-TE), whereby cells labeled with functionalized magnetic nanoparticles have been used to fabricate tissue constructs by applying a magnetic force.”
Kamaraj, M., Rezayof, O., Barer, A., Kim, H., Moghimi, N., Joshi, A., Dokmeci, M. R., Khademhosseini, A., Alambeigi, F., & John, J. V. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.214057 · Cited by 17
Spider-Inspired Multicomponent 3D Printing Technique for Next-Generation Complex Biofabrication
Zhou, Y. H., Liao, S., Tao, X., Xu, X., Hong, Q., Wu, D., & Wang, Y. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00230 · Cited by 17
Advanced Biomanufacturing Technologies for Micro-physiological Systems
Kim, M. K., Yoon, J., Kim, D., Kim, J., Kim, J.-S., Go, G., Song, J., Son, S., Park, K., Lee, J., et al. (2025) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-025-01330-6 · Cited by 16
Self-citationEngineered Regenerative Isolated Peripheral Nerve Interface for Targeted Reinnervation
Kwon, J., Eom, S., Kong, J. S., Cho, D., Kim, D. S., & Kim, J. (2024) · Advanced Materials · doi:10.1002/adma.202406652 · Cited by 17
Self-citationSicherer, S. T., Haque, N., Parikh, Y., & Grasman, J. M. (2024) · Advances in Wound Care · doi:10.1089/wound.2024.0111 · Cited by 16
Xia, W., Jin, M., Feng, Z., Zhang, J., Rong, Y., Zhang, Y., Zhang, S., Yu, Y., Yang, H., & Wang, T. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111877 · Cited by 15
3D Bioprinting Technologies and Bioinks for Therapeutic and Tissue Engineering Applications
Choi, Y., Park, J., Jang, J., & Cho, D. (2018) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2018-0014 · Cited by 16
Self-citationKim, H., Kim, Y., Fendereski, M., Hwang, N. S.-Y., & Hwang, Y. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0947-2_9 · Cited by 16
In Situ Bioprinting Enhances Bone Regeneration in a Live Animal Model with Craniofacial Defect
Hindy, O. A., Pinarbasi, B., Bakıcı, M., Demirtaş, O. B., Gökyer, Ş., Büyüksungur, A., Orhan, K., Oto, Ç., & Yilgor, P. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c00780 · Cited by 14
Advances in 3D Bioprinting of Biomimetic and Engineered Meniscal Grafts
Lv, H., Deng, G., Lai, J., Yu, Y., Chen, F., & Yao, J. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300199 · Cited by 14
de Barros, N. R., Darabi, M. A., Ma, X., Diltemiz, S. E., Ermis, M., Najafabadi, A. H., Nadine, S., Banton, E. A., Mandal, K., Abbasgholizadeh, R., et al. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300276 · Cited by 16
Tavares, D. F., Mano, J. F., & Oliveira, M. B. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101735 · Cited by 16
Metadata
- Authors
- Choi, Y., Kim, T. G., Jeong, J., Yi, H., Park, J. W., Hwang, W., & Cho, D.
- Affiliations
- Pohang University of Science and Technology (KR)
- Corresponding author
- Cho, Dong‐Woo
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2016-08-16
- Volume
- 5
- Issue
- 20
- Pages
- 2636-2645
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- OpenAlex
- W2508326269
- Cited by
- 298
- References
- 36
- Citations by year
- 2026: 15 · 2025: 29 · 2024: 24 · 2023: 31 · 2022: 42 · 2021: 30 · 2020: 45 · 2019: 34 · 2018: 22 · 2017: 24 · 2016: 2
- FWCI
- 13.18
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Healthcare Materials (publishedVersion)
- PubMed (publishedVersion)
- Open Access System for Information Sharing (Pohang University of Science and Technology) (submittedVersion)
- Funders
- Ministry of Science ICT and Future Planning (2010‐0018294, 2014M3C1B2048632)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Muscle Physiology and Disorders
- Keywords
- 3D cell printing, decellularized extracellular matrix, myotube formation, agrin, acetylcholine receptor clusters, muscle contractility, muscular injuries
- MeSH terms
- Animals, Cell Differentiation, Cell Survival, Extracellular Matrix, Swine, Muscle, Skeletal, Tissue Engineering, Biomimetics, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.