Alginate-based tissue-specific bioinks for multi-material 3D-bioprinting of pancreatic islets and blood vessels: A step towards vascularized pancreas grafts
Open accessThe DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
Although allogeneic islet transplantation has been proposed as a therapy for type 1 diabetes, its success rate remains low. Disruption of both extracellular matrix (ECM) and dense vascular network during islets isolation are referred to as some of the main causes of their poor engraftment. Therefore, the recapitulation of the native pancreatic microenvironment and its prompt revascularization should be beneficial for long-term islet survival. In this study, we developed novel bioinks suitable for the microfluidic-assisted multi-material biofabrication of 3D porous pancreatic and vascular structures. The tissue-specific bioactivity was introduced by blending alginate either with pancreatic decellularized extracellular matrix powder (A_ECM) or fibrinogen (A_FBR). The formulated bioinks, although they exhibited different rheological properties, were 3D-printed with high shape fidelity using a multichannel microfluidic platform coupled with a co-axial needle system. The A_FBR scaffolds were subjected to secondary crosslinking using thrombin, which significantly decreased their swelling and increased mechanical properties. To investigate the bioactivity, the A_ECM and A_FBR bioinks were laden with, respectively, porcine pancreatic islets and a mixture of vessel-forming cells (HUVEC and HMSC) and 3D-bioprinted with high viability. Insulin secretion upon glucose stimulation and developed vessel-like structures composed of CD31-positive cells validated the biomimetic potential of the two formulated bioinks. Moreover, we demonstrated the feasibility of the secondary crosslinking to modulate cell behaviour and angiogenic potential both in vitro and in vivo using a chick chorioallantoic membrane model. Finally, the successful 3D-printing of heterogeneous 3D scaffolds with three different configurations demonstrated that our approach could be considered as a potential step towards the biofabrication of a vascularized pancreas construct.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Cox, T. R., & Erler, J. T. (2011) · Disease Models & Mechanisms · doi:10.1242/dmm.004077 · Cited by 1,569
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Self-citationBioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Scharp, D. W., & Marchetti, P. (2014) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2013.07.018 · Cited by 314
3D cell printing of functional skeletal muscle constructs using skeletal muscle-derived bioink
Choi, Y., Kim, T. G., Jeong, J., Yi, H., Park, J. W., Hwang, W., & Cho, D. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600483 · Cited by 298
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Self-citationCell Loss in Isolated Human Islets Occurs by Apoptosis
Paraskevas, S., Maysinger, D., Wang, R., Duguid, W. P., & Rosenberg, L. (2000) · Pancreas · doi:10.1097/00006676-200004000-00008 · Cited by 229
Efficient myotube formation in 3D bioprinted tissue construct by biochemical and topographical cues
Kim, W., Lee, H., Lee, J., Atala, A., Yoo, J. J., Lee, S. J., & Kim, G. H. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119632 · Cited by 185
Cited by
Brown, M., Li, J., Moraes, C., Tabrizian, M., & Li-Jessen, N. Y. K. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121786 · Cited by 282
In vitro functional models for human liver diseases and drug screening: beyond animal testing
Paradiso, A., Volpi, M., Rinoldi, C., Celikkin, N., Contessi Negrini, N., Bilgen, M., Dallera, G., Pierini, F., Costantini, M., Święszkowski, W., et al. (2023) · Biomaterials Science · doi:10.1039/d1bm01872h · Cited by 40
Self-citationWang, X., Jin, L., Liu, W., Stingelin, L., Zhang, P., & Tan, Z. (2023) · Biomaterials Science · doi:10.1039/d3bm00346a · Cited by 15
Metadata
- Authors
- Idaszek, J., Volpi, M., Paradiso, A., Nguyen Quoc, M., Górecka, Ż., Klak, M., Tymicki, G., Berman, A., Wierzbicki, M., Jaworski, S., Costantini, M., Kępczyńska, A., Chwalibóg, E. S., Wszoła, M., & Święszkowski, W.
- Venue
- Bioprinting
- Publisher
- Elsevier BV
- Published
- 2021-12
- Volume
- 24
- Pages
- e00163
- ISSN
- 2405-8866 (ISSN-L)
- OpenAlex
- W3191481564
- Cited by
- 53
- References
- 11
- FWCI
- 2.45
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Alginate-based tissue-specific bioinks for multi-material 3D-bioprinting of pancreatic islets and blood vessels: A step towards vascularized pancreas grafts. https://app.cochat.ai/papers/10.1016/j.bprint.2021.e00163
- The paper
- Idaszek, J., Volpi, M., Paradiso, A., Nguyen Quoc, M., Górecka, Ż., Klak, M., Tymicki, G., Berman, A., Wierzbicki, M., Jaworski, S., Costantini, M., Kępczyńska, A., Chwalibóg, E. S., Wszoła, M., & Święszkowski, W. (2021). Alginate-based tissue-specific bioinks for multi-material 3D-bioprinting of pancreatic islets and blood vessels: A step towards vascularized pancreas grafts. Bioprinting. https://doi.org/10.1016/j.bprint.2021.e00163
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.