Graphene Oxide‐Doped Gellan Gum–PEGDA Bilayered Hydrogel Mimicking the Mechanical and Lubrication Properties of Articular Cartilage
Open accessThe DOI matches its Crossref record; 101 of the 102 references it cites were found in a registry or an index.
Abstract
Articular cartilage (AC) is a specialized connective tissue able to provide a low‐friction gliding surface supporting shock‐absorption, reducing stresses, and guaranteeing wear‐resistance thanks to its structure and mechanical and lubrication properties. Being an avascular tissue, AC has a limited ability to heal defects. Nowadays, conventional strategies show several limitations, which results in ineffective restoration of chondral defects. Several tissue engineering approaches have been proposed to restore the AC's native properties without reproducing its mechanical and lubrication properties yet. This work reports the fabrication of a bilayered structure made of gellan gum (GG) and poly (ethylene glycol) diacrylate (PEGDA), able to mimic the mechanical and lubrication features of both AC superficial and deep zones. Through appropriate combinations of GG and PEGDA, cartilage Young's modulus is effectively mimicked for both zones. Graphene oxide is used as a dopant agent for the superficial hydrogel layer, demonstrating a lower friction than the nondoped counterpart. The bilayered hydrogel's antiwear properties are confirmed by using a knee simulator, following ISO 14243. Finally, in vitro tests with human chondrocytes confirm the absence of cytotoxicity effects. The results shown in this paper open the way to a multilayered synthetic injectable or surgically implantable filler for restoring AC defects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Mechanical characterization of GG/PEGDA10 and GG/PEGDA15 hydrogels, in terms of: Young's modulus, fracture stress, fracture strain, toughness and swelling ratio. For the Young's modulus, the blue areas represent the range of stiffness reported in O'Connell et al.[ 5b ] for the native articular cartilage. Data presented as mean ± SD, n = 5, p‐values are calculated using the one‐way ANOVA with Tukey's post‐test correction, * p < 0.05, ** p < 0.01. Analyzed samples: GG/PEGDA10_5 minUV, GG/PEGDA10_5 minUV_10 minMgCl2, GG/PEGDA10_10 minUV, GG/PEGDA10_10 minUV_10 minMgCl2, GG/PEGDA15_5 minUV, GG/PEGDA15_5 minUV_10 minMgCl2, GG/PEGDA15_10 minUV, GG/PEGDA15_10 minUV_10 minMgCl2.](https://figures.cochat.ai/paper-figures/5fa42dd32a5d489b9af0d670fcdf06c6/graphene-oxidedoped-gellan-gumpegda-bilayered-hydrogel-mimicking-the-mechanical-figure-2.jpg)
![Figure 3 Characterization of GO and its inclusion in the hydrogel: a) SEM images of layered GO flakes; b) Raman spectrum at 532 nm; c) AFM measurements of a dispersed GO demonstrated minimal thickness of 4.0 ± 0.3 nm (n = 5); d) HRTEM image, confirming the layered structure of a dispersed GO. e) Analysis of the nanocomposite GG/PEGDA10/GO_5 minUV_10 minMgCl2: Young's modulus, fracture stress, fracture strain, and toughness. For the Young's modulus, the blue areas represent the range of stiffness featuring the superficial articular cartilage, reported in ref. [ 5b ]. Data presented as mean ± SD, n = 5, p‐values are calculated using the Student's t‐tests, * p < 0.05, ** p < 0.01. Analyzed samples: GG/PEGDA10_5 minUV_10 minMgCl2, GG/PEGDA10/GO_5 minUV_10 minMgCl2.](https://figures.cochat.ai/paper-figures/017f66cbd95a48c4aaa5ba4027da733b/graphene-oxidedoped-gellan-gumpegda-bilayered-hydrogel-mimicking-the-mechanical-figure-3.jpg)
![Figure 4 a) Depiction of the set‐up used for testing the hydrogels (red block). b) Analysis of the composite hydrogels according to the Stribeck curve: static and dynamic regimes are marked with arrows, and the transition zone is magnified. Tests were performed evaluating both PBS and synthetic synovial fluid as lubricants. c) Values of coefficient of friction (COF) (mean ± SD) measured at the transition region varying the normal force (0.5, 5, and, 10 N). d) Analysis of the hydrogel wear upon the application of a constant normal force for 30 min at constant normal force (0.5 N) and rotational speed (0.05 mm−1). All tests were performed at 37 °C. In all graphs, the blue line represents the COF of the healthy articular cartilage.[ 5b ] Data presented as mean ± SD, n = 3, p‐values are calculated using the Student's t‐tests, * p < 0.05, ** p < 0.01. Analyzed samples: GG/PEGDA10_5 minUV_10 minMgCl2, GG/PEGDA10/GO_5 minUV_10 minMgCl2.](https://figures.cochat.ai/paper-figures/d0ff4034698540f6a2ed57cbaeea244d/graphene-oxidedoped-gellan-gumpegda-bilayered-hydrogel-mimicking-the-mechanical-figure-4.jpg)



Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Hunter, D. J., & Bierma-Zeinstra, S. (2019) · The Lancet · doi:10.1016/s0140-6736(19)30417-9 · Cited by 4,795
The Basic Science of Articular Cartilage: Structure, Composition, and Function
Sophia Fox, A. J., Bedi, A., & Rodeo, S. A. (2009) · Sports Health: A Multidisciplinary Approach · doi:10.1177/1941738109350438 · Cited by 2,774
Surgical and tissue engineering strategies for articular cartilage and meniscus repair
Kwon, H., Brown, W. E., Lee, C. A., Wang, D., Paschos, N., Hu, J. C., & Athanasiou, K. A. (2019) · Nature Reviews Rheumatology · doi:10.1038/s41584-019-0255-1 · Cited by 652
The Basic Science of Human Knee Menisci: Structure, Composition, and Function
Fox, A. J. S., Bedi, A., & Rodeo, S. A. (2012) · Sports Health: A Multidisciplinary Approach · doi:10.1177/1941738111429419 · Cited by 582
Buckwalter, J. A. (2002) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-200209000-00004 · Cited by 566
Tough and highly stretchable graphene oxide/polyacrylamide nanocomposite hydrogels
Liu, R., Liang, S., Tang, X.-Z., Yan, D., Li, X., & Yu, Z.-Z. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32541a · Cited by 500
Basic Science of Articular Cartilage and Osteoarthritis
Pearle, A. D., Warren, R. F., & Rodeo, S. A. (2005) · Clinics in Sports Medicine · doi:10.1016/j.csm.2004.08.007 · Cited by 476
The Role of Tissue Engineering in Articular Cartilage Repair and Regeneration
Zhang, L., Hu, J., & Athanasiou, K. A. (2009) · Critical Reviews™ in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v37.i1-2.10 · Cited by 475
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Research works printed but not linked: 8
- K.‐X. A. L. Hooi Yee Ng, Y. ‐F. Shen, JSM Bone Jt. Dis. 2017, 1, 1010.
- 10.1016/j.joca.2018.10.004 · DOI
- 10.1007/s00402-018-3057-z · DOI
- 10.1016/j.nano.2019.04.002 · DOI
- 10.1016/j.actbio.2019.10.025 · DOI
- Y. Zhang, J. Xu, Y. Qu, X. Xi, J. Yang, Ceram. Int. 2014, 40, 5715.
- 10.1002/smll.201401635 · DOI
- 10.1089/ten.teb.2011.0394 · DOI
Cited by
Bellier, N., Baipaywad, P., Ryu, N., Lee, J. Y., & Park, H. (2022) · Biomaterials Research · doi:10.1186/s40824-022-00313-2 · Cited by 175
“While GO and rGO nanoparticles can be incorporated into scaffolds for general tissue engineering, such as skin [188–190], cartilage [191, 192], bone [189, 193–195], and muscle tissue [196, 197] rGO is commonly incorporated into nanofibers to enhance their electroconductivity, which is a significant factor in cardiac a…”
BackgroundTolabi, H., Davari, N., Khajehmohammadi, M., Malektaj, H., Nazemi, K., Vahedi, S., Ghalandari, B., Reis, R. L., Ghorbani, F., & Oliveira, J. M. (2023) · Advanced Materials · doi:10.1002/adma.202208852 · Cited by 160
Roadmap for 2D materials in biotribological/biomedical applications – A review
Marian, M., Berman, D., Nečas, D., Emami, N., Ruggiero, A., & Rosenkranz, A. (2022) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2022.102747 · Cited by 84
Ricotti, L., Cafarelli, A., Manferdini, C., Trucco, D., Vannozzi, L., Gabusi, E., Fontana, F., Dolzani, P., Saleh, Y., Lenzi, E., et al. (2024) · ACS Nano · doi:10.1021/acsnano.3c08738 · Cited by 89
Self-citationCai, Z., Tang, Y., Wei, Y. Z., Wang, P., & Zhang, H. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.062 · Cited by 81
Trucco, D., Sharma, A., Manferdini, C., Gabusi, E., Petretta, M., Desando, G., Ricotti, L., Chakraborty, J., Ghosh, S., & Lisignoli, G. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00410 · Cited by 81
Self-citationZhang, Z., Shen, C., Zhang, P., Xu, S., Kong, L., Liang, X., Li, C., Qiu, X., Huang, J. S., & Cui, X. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103145 · Cited by 84
Zare, I., Mirshafiei, M., Kheilnezhad, B., Far, B. F., Hassanpour, M., Pishbin, E., Vaghefi, S. S. E., Yazdian, F. A., Rashedi, H., Hasan, A., et al. (2024) · Carbon · doi:10.1016/j.carbon.2024.118970 · Cited by 78
“Hydrogel-integrated GSSs offer several advantages over conventional tissue engineering approaches [79].”
Smart Hydrogels Meet Carbon Nanomaterials for New Frontiers in Medicine
Adorinni, S., Rozhin, P., & Marchesan, S. (2021) · Biomedicines · doi:10.3390/biomedicines9050570 · Cited by 72
Eivazzadeh‐Keihan, R., Sadat, Z., Lalebeigi, F., Naderi, N., Panahi, L., Ganjali, F., Mahdian, S., Saadatidizaji, Z., Mahdavi, M. R., Chidar, E., et al. (2024) · Nanoscale Advances · doi:10.1039/d3na00554b · Cited by 73
Polymeric Hydrogels for Controlled Drug Delivery to Treat Arthritis
Gupta, A., Lee, J., Ghosh, T., Nguyen, V. Q., Dey, A., Yoon, B., Um, W., & Park, J. H. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14030540 · Cited by 61
“Moreover, to improve the stability and toughness properties of the hydrogel, modified GG hydrogels such as the GGMA/GelMA DN hydrogel embedded with cells [77], GG-tyr encapsulating betamethasone and anti-TNFαmonoclonal antibody therapies (anti-TNF-αmAb) [78,79] and a graphene oxide-doped bilayered hydrogel consisting…”
Interpenetrating PAA-PEDOT conductive hydrogels for flexible skin sensors
Fu, F., Wang, J., & Yu, J. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc01578h · Cited by 58
Zhou, H., Zhang, Z., Mu, Y., Yao, H., Zhang, Y., & Wang, D. (2024) · ACS Nano · doi:10.1021/acsnano.4c00780 · Cited by 53
Emerging advances in hydrogel-based therapeutic strategies for tissue regeneration
Li, W., Hu, J., Chen, C., Li, X., Zhang, H., Xin, Y., Tian, Q., & Wang, S. (2023) · Regenerative Therapy · doi:10.1016/j.reth.2023.09.007 · Cited by 52
“…in the repeat units of gellan gum (GG) have a similar structure to native articular cartilage glycosaminoglycans and hyaluronic acid has characteristics of cartilage protection and cartilage induction and lubricate cartilage, both of which play important roles in cartilage formation [35,106].”
Hydrogels for the treatment of rheumatoid arthritis
Yi, J., Liu, Y., Xie, H., An, H., Li, C., Wang, X., & Chai, W. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1014543 · Cited by 49
“, 2021), fatigue properties (Diego et al., 2021), toughness and swelling ratio and so on.”
BackgroundAdvances in tissue engineering of gellan gum-based hydrogels
Wu, S., Xiao, R., Wu, Y. Q., & Xu, L. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121484 · Cited by 50
Injectable hydrogels as promising in situ therapeutic platform for cartilage tissue engineering
Cai, R., Shan, Y., Du, F., Miao, Z., Zhu, L., Hang, L., Xiao, L., & Wang, Z. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.129537 · Cited by 48
Li, C., Li, F., Wang, K., Wang, Q., Liu, H., Sun, X., & Xie, D. H. (2022) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2023.110965 · Cited by 45
Wang, X., Li, H., Liu, Y., Ding, S., Jiang, L., & Wang, R. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.130081 · Cited by 45
Advances in Mechanical Properties of Hydrogels for Cartilage Tissue Defect Repair
Wang, W., Shi, Y., Lin, G., Tang, B., Li, X., Zhang, J., Ding, X., & Zhou, G. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202200539 · Cited by 44
Wei, Q., Liu, H., Zhao, X., Zhao, W., Xu, R., Ma, S., & Zhou, F. (2022) · Tribology International · doi:10.1016/j.triboint.2022.108000 · Cited by 47
Fu, X.-K., Cao, H., An, Y., Zhou, H., Shi, Y., Hou, G., & Ha, W. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c07869 · Cited by 43
Yang, Q., Liu, G., Chen, G., Chen, G., Chen, K., Fan, L., Tu, Y., Chen, J., Shi, Z., Chen, C., et al. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.08.018 · Cited by 42
“It has been well-established that the articular cartilage provides a low-friction gliding surface for joint movement, and the cartilage damage and degeneration will cause inadequate lubrication on the joint surface [47,49,82].”
BackgroundNiknam, Z., Hosseinzadeh, F., Shams, F., Fath‐Bayati, L., Nuoroozi, G., Amirabad, L. M., Mohebichamkhorami, F., Naeimi, S. K., Ghafouri‐Fard, S., Zali, H., et al. (2022) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37417 · Cited by 41
Graphene derivative based hydrogels in biomedical applications
Ni, F., Chen, Y., Wang, Z., Zhang, X., Gao, F., Shao, Z., & Wang, H. (2024) · Journal of Tissue Engineering · doi:10.1177/20417314241282131 · Cited by 41
Vannozzi, L., Catalano, E., Telkhozhayeva, M., Teblum, E., Yarmolenko, A., Avraham, E. S., Konar, R., Nessim, G. D., & Ricotti, L. (2021) · Nanomaterials · doi:10.3390/nano11082105 · Cited by 37
“For example, GO and rGO have been used as electrical dopant agents in conductive composite materials [5,6], for mechanical reinforcement of polymeric matrices [7], or as lubricant agents to improve the wear of scaffolds to be used as substitutes for load-bearing joints [8,9].”
BackgroundSelf-citationAlmasi, M. J., & Xiong, D. (2024) · Journal of Bionic Engineering · doi:10.1007/s42235-024-00480-z · Cited by 29
“7 Hydrogel preparation by the integration of GG, PEGDA, and GO, two distinct layers, imitating the characteristics of both deep and superficial cartilage [58] lubricate them, which reduces friction between materials.”
Arctiin-reinforced antioxidant microcarrier antagonizes osteoarthritis progression
Liu, Y., Hou, M., Pan, Z., Tian, X., Zhao, Z., Liu, T., Yang, H., Shi, Q., Chen, X., Zhang, Y., et al. (2022) · Journal of Nanobiotechnology · doi:10.1186/s12951-022-01505-7 · Cited by 28
“In relation to the presence of a backbone glucuronic acid residue, the structure of GG resembles that of the natural glycosaminoglycan (GAG) component of the articular cartilage [22].”
BackgroundZhang, J., Li, B., Zuo, J., Gu, R., Liu, B., Ma, C., Li, J., & Liu, K. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100109 · Cited by 26
Jiang, Y., Li, G., Wang, H., Li, Q., & Tang, K. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202100443 · Cited by 26
Manferdini, C., Trucco, D., Saleh, Y., Gabusi, E., Dolzani, P., Lenzi, E., Vannozzi, L., Ricotti, L., & Lisignoli, G. (2022) · Gels · doi:10.3390/gels8060382 · Cited by 27
“The elastic modulus was measured by performing uniaxial compression with an Instron Mechanical Testing System (model 2444, Instron, Norwood, MA, USA) equipped with ±10 N load cell at a compression rate of 1 mm/min until reaching the hydrogel breaking point, as previously reported [45].”
MethodSelf-citationProgress in 3D Bioprinting Technology for Osteochondral Regeneration
Lafuente‐Merchan, M., Ruíz, S., García‐Villén, F., Gallego, I., Gálvez‐Martín, P., del Burgo, L. S., & Pedraz, J. L. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14081578 · Cited by 28
“In fact, hydrogel-based cellular supports have been already studied with successful results in terms of mimicking native mechanical properties and improving cell viability [42,43].”
BackgroundWei, P., Ma, Y., Qin, K., & Fan, Z. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109328 · Cited by 25
Recent research progress of hydrogel on cartilage
Ma, Q., Lin, D., Liu, Y., Liu, X., Zhao, H., Zhou, G., Liu, S., & Sun, K. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113115 · Cited by 24
Atomistic modelling and experimental study of tensile strength of nanocomposite hydrogel
Kumar, R., Chaurasia, A., Tewari, A., & Parashar, A. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2024.109397 · Cited by 23
Wear Behavior Characterization of Hydrogels Constructs for Cartilage Tissue Replacement
Affatato, S., Trucco, D., Taddei, P., Vannozzi, L., Ricotti, L., Nessim, G. D., & Lisignoli, G. (2021) · Materials · doi:10.3390/ma14020428 · Cited by 23
Self-citationChen, M., Yu, P., Xing, J., Wang, Y., Ren, K., Zhou, G., Luo, J., Xie, J., & Li, J. (2022) · Journal of Materials Chemistry B · doi:10.1039/d2tb00421f · Cited by 22
Durable hydrogel-based lubricated composite coating with remarkable underwater performances
Zhang, J., Guan, Y., Zhang, Q., Wang, T., Wang, M., Zhang, Z., Gao, Y., & Gao, G. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.09.193 · Cited by 22
Short review on the use of graphene as a biomaterial –prospects, and challenges in Brazil
Souza, I. E. P. E., Cambraia, L. V., Gomide, V. S., & Nunes, E. H. M. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.05.170 · Cited by 23
Chen, Q., Chen, K., Zhang, X., Feng, H., Feng, C., Li, X., & Zhang, D. (2024) · Friction · doi:10.26599/frict.2025.9440984 · Cited by 23
Yu, H., Feng, M., Mao, G., Li, Q., Zhang, Z., Bian, W., & Qiu, Y. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00445 · Cited by 21
Manferdini, C., Gabusi, E., Saleh, Y., Lenzi, E., D’Atri, G., Ricotti, L., & Lisignoli, G. (2022) · Cells · doi:10.3390/cells11243969 · Cited by 22
“The AC protects bone surfaces within joints by providing a low-friction gliding surface for the articulation, supporting shock-absorption, distributing loads, reducing stresses on the subchondral bone and guaranteeing wear resistance [5].”
BackgroundSelf-citation3D-printed constructs deliver bioactive cargos to expedite cartilage regeneration
Jiao, R., Lin, X., Wang, J., Zhu, C., Hu, J., Gao, H., & Zhang, K. (2023) · Journal of Pharmaceutical Analysis · doi:10.1016/j.jpha.2023.12.015 · Cited by 19
Zhong, W., Dong, J., Chen, S., & Tong, Z. (2023) · Materials · doi:10.3390/ma16144979 · Cited by 17
Ma, J., Li, J., Wei, S., Ge, Q., Wu, J., Xue, L., Qi, Y., Xu, S., Jin, H., Gao, C., et al. (2024) · Journal of Tissue Engineering · doi:10.1177/20417314241260436 · Cited by 17
“40 The study conducted by Bai et al. 41 recently highlights the potential of mitochondria-targeting nanozyme injection administered via caudal vein to effectively alleviate TMJOA pain in mice through inhibition of ROS production.”
BackgroundStrategies to engineer articular cartilage with biomimetic zonal features: a review
Semitela, Â., Marques, P. A. A. P., & Completo, A. (2024) · Biomaterials Science · doi:10.1039/d4bm00579a · Cited by 17
Ajam, A., Huang, Y., Islam, M. S., Kilian, K. A., & Kruzic, J. J. (2024) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2024.106642 · Cited by 16
Ji, Y., Li, T., Abo‐Dief, H. M., Abualnaja, K. M., Wei, M., Zhang, J., Wang, X., Zhang, J., Guo, Z., El-Bahy, Z. M., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.136333 · Cited by 17
Wang, Z., Yao, S., Zhang, Y., Li, S., Zhou, T., Wang, S., Guo, D., & Gao, C. (2024) · Nano Today · doi:10.1016/j.nantod.2024.102373 · Cited by 14
Kumar, M., & Sharma, V. (2023) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2023.105904 · Cited by 15
Probing the intriguing frictional behavior of hydrogels during alternative sliding velocity cycles
Zhao, Y., Yi, G., Cui, J., Zhao, Z., Yan, Y., Wei, L., Shao, J., Zeng, H., & Huang, J. S. (2023) · Friction · doi:10.1007/s40544-023-0741-2 · Cited by 14
“The gel can greatly imitate the mechanical and lubricating properties of articular cartilage and can be used as a filler for surgical implantation [17].”
BackgroundFabrication of AFM-Compatible Hydrogel Probe to Achieve Hydration Superlubrication in Salt Solutions
Wu, Z., Zhang, R., & Li, J. (2025) · Small · doi:10.1002/smll.202411253 · Cited by 13
Wong, L. Y., Ganguly, S., & Tang, X. S. (2024) · Polymer · doi:10.1016/j.polymer.2024.127305 · Cited by 12
Microbial biopolymers in articular cartilage tissue engineering
Bingül, N. D., Öz, Y. E., Şendemir, A., & Hameş, E. E. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03178-0 · Cited by 12
Delbaldo, C., Tschon, M., Martini, L., Fini, M., & Codispoti, G. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23158236 · Cited by 11
“The presence of NPs might improve the mechanical and lubrication properties of hydrogels [27].”
BackgroundMeng, H., Ye, W., Wang, C., Gao, Z., Hu, B., & Wang, C. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120145 · Cited by 11
Measuring the depth-dependent fracture toughness of articular cartilage based on CTOD method
Gao, L., Tian, X., Tan, Y., Tian, H., Gao, Q., Liu, Z., Kong, D., & Zhang, C. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.09.268 · Cited by 10
Hu, D., Wang, Y., Yan, Y., Bai, C., Lu, Y., Wu, T., Guo, Y., Liu, D., & Wang, X. (2026) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-025-01605-6 · Cited by 10
“Current design strategies primarily uti - lize a simple layered structure, combining a mechanically robust bottom layer with a highly lubricious top layer, to achieve synergistic load-bearing and lubrication through zonal cooperation [20 –22 ].”
Wei, Q., Zhang, C., Quan, Y., Shi, H., Zhang, Y., Xu, R., Ma, S., & Zhou, F. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.202524676 · Cited by 18
da Silva, T. S., Soares, M. M., Carreira, A. C. O., Matias, G. D. S. S., Tegon, C. C., Massi, M., Oliveira, A. D. A., da Silva-Júnior, L. N., de Carvalho, H. J. C., Almeida, G. H. D. R., et al. (2021) · Polymers · doi:10.3390/polym13193382 · Cited by 10
“[3] demonstrated that GO associated with gellan gum (GG) and hydrogel of poly diacrylate (PEGDA) in order to mimic the mechanical and lubricating characteristics of superficial and deep articular cartilage.”
BackgroundHussain, A., Batool, I., Shahzad, K., Naqvi, S. K. H., Akhter, S., Zafar, U., Chawraba, K., & Park, S. H. (2026) · Macromolecular Bioscience · doi:10.1002/mabi.202500553 · Cited by 9
“In tissue engineering, graphene-integrated hydrogels offer distinct advantages over other materials [ 138 ].”
Kumar, R., Tewari, A., & Parashar, A. (2024) · Mechanics of Materials · doi:10.1016/j.mechmat.2024.105161 · Cited by 9
Chen, X., Cao, H., Lei, H., Li, N., Song, P., Cao, Y. L., Tian, W., Cui, X., Yuan, T., Liang, J., et al. (2025) · Advanced Materials · doi:10.1002/adma.202514327 · Cited by 10
Glycosaminoglycan-Mediated Interactions in Articular, Auricular, Meniscal, and Nasal Cartilage
Rathnayake, M. S. B., Boos, M. A., Farrugia, B. L., van Osch, G. J. V. M., & Stok, K. S. (2024) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2023.0346 · Cited by 7
Tribomechanical Properties of PVA/Nomex® Composite Hydrogels for Articular Cartilage Repair
dos Santos, F. A. V., Marto-Costa, C., Branco, A. C., Oliveira, A. S., dos Santos, R. G., Salema‐Oom, M., Diaz, R. L., Williams, S., Colaço, R., Figueiredo-Pina, C. G., et al. (2024) · Gels · doi:10.3390/gels10080514 · Cited by 7
“The incorporation of fillers like graphene oxide [26], hydroxyapatite [27], nanocellulose [28], and aramid [29] have been explored in the last years.”
BackgroundTrucco, D., Gibney, R., Vannozzi, L., Lisignoli, G., Kelly, D. J., & Ricotti, L. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.03.133 · Cited by 7
Self-citationKanca, Y., & Özkahraman, B. (2022) · Journal of Biomaterials Applications · doi:10.1177/08853282221144235 · Cited by 7
“Trucco et al.(47) fabricated bilayered GG and poly (ethylene glycol) diacrylate structures to mimic the frictional and mechanical performance of superficial and deep zones of the articular cartilage.”
BackgroundPreparation and properties of a photocrosslinked MCl n -doped PDMA- g -PSMA hydrogel
Chen, Z., Wu, H., Fei, J., Li, Q., Ni, R., Qiu, Y., Yang, D., & Yu, L. (2023) · RSC Advances · doi:10.1039/d2ra07079k · Cited by 7
Deletion of DYRK1A Accelerates Osteoarthritis Progression Through Suppression of EGFR-ERK Signaling
Liu, Z., Hu, S., Wu, J., Quan, X., Shen, C., Li, Z., Yuan, X., Li, X., Yu, C., Wang, T., et al. (2023) · Inflammation · doi:10.1007/s10753-023-01813-6 · Cited by 7
“rapid wear of articular cartilage and subsequent cartilage rupture [32, 33].”
BackgroundLiu, Y., Zhang, J., Li, S., & Xia, H. (2021) · Biomedical Optics Express · doi:10.1364/boe.432441 · Cited by 6
Visible light-mediated cross-linking of injectable gellan gum hydrogels embedding human chondrocytes
Trucco, D., Vannozzi, L., Gabusi, E., Lenzi, E., Manferdini, C., Bacci, A., Agresti, L., Pascale, M. R., Cristino, S., Lisignoli, G., et al. (2023) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2023.100382 · Cited by 9
Self-citationA Novel Approach for Multiple Material Extrusion in Arthroscopic Knee Surgery
Mazzocchi, T., Guarnera, D., Trucco, D., Restaino, F. R., Vannozzi, L., Siliberto, A., Lisignoli, G., Zaffagnini, S., Russo, A., & Ricotti, L. (2022) · Annals of Biomedical Engineering · doi:10.1007/s10439-022-03061-5 · Cited by 4
Self-citationChen, X., Hu, H., Yang, J., Wang, Y., Yue, W., Xing, P., Zhang, Y., Chen, J., Xu, T., & Li, Y. (2026) · Materials Today Bio · doi:10.1016/j.mtbio.2026.102826 · Cited by 3
“Hydrogels, despite their excellent printability, exhibit poor extracellular matrix (ECM) deposition and insufficient mechanical strength compared to native auricular cartilage [3,4].”
Graphene Oxide–based Biomaterials in Sports Medicine
Xi, M., Wan, R., Luo, W., He, Y., Feng, X., Wang, T., Qiu, J., Chen, S., & Luo, Z. (2026) · BIO Integration · doi:10.15212/bioi-2025-0172 · Cited by 3
Sharma, D., & Satapathy, B. K. (2024) · Macromolecular Bioscience · doi:10.1002/mabi.202400125 · Cited by 3
Recent Advancements in Hydrogel Biomedical Research in Italy
Zanrè, E., Valle, E. D., D’Angelo, E., Sensi, F., Agostini, M., & Cimetta, E. (2024) · Gels · doi:10.3390/gels10040248 · Cited by 3
“The composite hydrogel had excellent resistance to wear, as validated through knee simulator tests and good biocompatibility following in vitro experiments with human chondrocytes [52].”
BackgroundRayes, A., Georgas, E., Liu, H., Sun, X. S., Zhou, Q., & Qin, Y. (2025) · Med-X · doi:10.1007/s44258-025-00054-6 · Cited by 2
“The superficial zone typically demonstrates lower tensile strength and stiffness than deeper zones, with compression Young's modulus ranging from approximately 280 ± 160 to 730 ± 260 kPa for the superficial and deep regions, respectively [31].”
Codispoti, G., Trucco, D., Carniato, M., Vannozzi, L., Martini, L., Manferdini, C., Lisignoli, G., Tschon, M., Fini, M., & Ricotti, L. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.116244 · Cited by 2
Self-citationWang, C., Wang, R., Li, Y., Hou, X., Han, S., & Zhao, X. Y. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.11.185 · Cited by 2
Wang, T. T., Zhou, H., He, J., Zheng, Y., Wen, J., Huang, Y., Liu, K., Zhang, Y., & Wang, K. (2025) · MedComm – Biomaterials and Applications · doi:10.1002/mba2.70021 · Cited by 3
Tang, L., Shen, Y., Huang, R., Chen, Y., Zhou, H., Liu, S., Chu, H., & Zhou, G. (2026) · Biomacromolecules · doi:10.1021/acs.biomac.5c02455 · Cited by 1
Wei, Q., Zhang, C., Quan, Y., Shi, H., Zhang, Y., Xu, R., Ma, S., & Zhou, F. (2026) · Angewandte Chemie · doi:10.1002/ange.202524676 · Cited by 1
Engineering scaffolds for tissue engineering and regenerative medicine
Cengiz, I. F., Reis, R. L., & Oliveira, J. M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-88524-9.00030-9 · Cited by 2
Kashkooli, T. P., Hatami, M., Hashemi, S., & Shahhossein, Z. (2025) · WORLD JOURNAL OF PLASTIC SURGERY · doi:10.61882/wjps.14.2.21
Gao, L., Wang, Y., Liu, B., Tan, Y., Liu, J., Lin, X., & Zhang, C. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-12157-5
3D printed self-lubricating bionic cartilage
Zeng, X., Nie, Y., Wei, P., Liao, X., Cao, C., Zhang, J., Wang, X., Che, Y., Fan, Z., & He, D. (2026) · Tribology International · doi:10.1016/j.triboint.2026.111844
Zhao, X., Kou, X., Zhao, W., Chen, Y., Kong, Y., Zhang, J., Ma, Z., Zhang, Y., Yu, B., & Ma, S. (2026) · Materials Horizons · doi:10.1039/d6mh00765a
Application of hydrogel technologies in the treatment of musculoskeletal disorders
Li, J., Su, X., Dong, Y., Wan, W., Tian, J., & Zhao, Y. (2026) · Chinese Medical Journal · doi:10.1097/cm9.0000000000004158
Ajam, A. (2026) · UNSWorks (University of New South Wales, Sydney, Australia) · doi:10.26190/unsworks/32466
Toward living lubrication: Designing hydrogels that learn, adapt, and respond
Cai, Y., Kang, J., & Lin, W. (2026) · Friction · doi:10.26599/frict.2026.9441290 · Cited by 1
Mechanically Robust Lubricating Hydrogels Employing Surface Host‐Guest Regenerating Polymer Brushes
Liu, Y., Liu, H., Liu, H., Li, Z., Ma, Y., Wu, Y. J., & Zhou, F. (2026) · Advanced Functional Materials · doi:10.1002/adfm.78001
“The joints maintain outstanding lubricating performance throughout the organism’s lifespan, accommo-dating demanding and complex mechanical activities such as running and jumping [ 3, 4 ].”
Liu, Y., Xu, L., Huang, C., Wu, X., Zhou, Y., Wang, Y., Zhao, X., & Ma, S. (2026) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2026.104031
Sawyer, M. (2025) · Scholar Works (Boise State University)
Sawyer, M. (2025) · ScholarWorks (Boise State University) · doi:10.18122/td.2472.boisestate
Recent advances and emerging mechanisms in graphene-based materials for cartilage tissue engineering
Sawyer, M., & Estrada, D. (2026) · npj Biomedical Innovations. · doi:10.1038/s44385-026-00120-7
“…routes, graphene derivatives have been incorporated into a variety of scaffold formats https://doi.org/10.1038/s44385-026-00120-7 Review npj Biomedical Innovations| (2026) 3:61 using fabrication strategies such as 3D bioprinting, freeze-drying, electro-spinning, and mold-based casting 103 – 107 .”
InfluentialChoi, Y. J., Kim, S., Shim, Y., Bail, R., & Lee, D. H. (2026) · Ionics · doi:10.1007/s11581-026-07620-x
Metadata
- Authors
- Trucco, D., Vannozzi, L., Teblum, E., Telkhozhayeva, M., Nessim, G. D., Affatato, S., Al‐Haddad, H., Lisignoli, G., & Ricotti, L.
- Affiliations
- Scuola Superiore Sant'Anna (IT)
- Bar-Ilan University (IL)
- Istituto Ortopedico Rizzoli (IT)
- Corresponding author
- Trucco, Diego
- Lisignoli, Gina
- Ricotti, Leonardo
- ORCID
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2021-02-15
- Volume
- 10
- Issue
- 7
- Pages
- e2001434-e2001434
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- PMC
- PMC11468639
- OpenAlex
- W3131237248
- Cited by
- 94
- References
- 102
- Citations by year
- 2026: 15 · 2025: 6 · 2024: 26 · 2023: 16 · 2022: 22 · 2021: 9
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Update notices
- correction (2021-06-23)
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Advanced Healthcare Materials (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- Funders
- European Commission (HORIZON2020, 814413)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Rheumatology › Osteoarthritis Treatment and Mechanisms
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- articular cartilage, gellan gum, poly(ethylene glycol) diacrylate, graphene oxide doping, cartilage biomechanics, cartilage lubrication, Young's modulus, friction, anti-wear, knee simulator, chondrocytes, cartilage defect repair
- MeSH terms
- Cartilage, Articular, Graphite, Humans, Lubrication, Polysaccharides, Bacterial, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.