Graphene Oxide‐Doped Gellan Gum–PEGDA Bilayered Hydrogel Mimicking the Mechanical and Lubrication Properties of Articular Cartilage
Open accessThe DOI matches its Crossref record; 101 of the 102 references it cites were found in a registry or an index.
Abstract
Articular cartilage (AC) is a specialized connective tissue able to provide a low‐friction gliding surface supporting shock‐absorption, reducing stresses, and guaranteeing wear‐resistance thanks to its structure and mechanical and lubrication properties. Being an avascular tissue, AC has a limited ability to heal defects. Nowadays, conventional strategies show several limitations, which results in ineffective restoration of chondral defects. Several tissue engineering approaches have been proposed to restore the AC's native properties without reproducing its mechanical and lubrication properties yet. This work reports the fabrication of a bilayered structure made of gellan gum (GG) and poly (ethylene glycol) diacrylate (PEGDA), able to mimic the mechanical and lubrication features of both AC superficial and deep zones. Through appropriate combinations of GG and PEGDA, cartilage Young's modulus is effectively mimicked for both zones. Graphene oxide is used as a dopant agent for the superficial hydrogel layer, demonstrating a lower friction than the nondoped counterpart. The bilayered hydrogel's antiwear properties are confirmed by using a knee simulator, following ISO 14243. Finally, in vitro tests with human chondrocytes confirm the absence of cytotoxicity effects. The results shown in this paper open the way to a multilayered synthetic injectable or surgically implantable filler for restoring AC defects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Mechanical characterization of GG/PEGDA10 and GG/PEGDA15 hydrogels, in terms of: Young's modulus, fracture stress, fracture strain, toughness and swelling ratio. For the Young's modulus, the blue areas represent the range of stiffness reported in O'Connell et al.[ 5b ] for the native articular cartilage. Data presented as mean ± SD, n = 5, p‐values are calculated using the one‐way ANOVA with Tukey's post‐test correction, * p < 0.05, ** p < 0.01. Analyzed samples: GG/PEGDA10_5 minUV, GG/PEGDA10_5 minUV_10 minMgCl2, GG/PEGDA10_10 minUV, GG/PEGDA10_10 minUV_10 minMgCl2, GG/PEGDA15_5 minUV, GG/PEGDA15_5 minUV_10 minMgCl2, GG/PEGDA15_10 minUV, GG/PEGDA15_10 minUV_10 minMgCl2.](https://figures.cochat.ai/paper-figures/5fa42dd32a5d489b9af0d670fcdf06c6/graphene-oxidedoped-gellan-gumpegda-bilayered-hydrogel-mimicking-the-mechanical-figure-2.jpg)
![Figure 3 Characterization of GO and its inclusion in the hydrogel: a) SEM images of layered GO flakes; b) Raman spectrum at 532 nm; c) AFM measurements of a dispersed GO demonstrated minimal thickness of 4.0 ± 0.3 nm (n = 5); d) HRTEM image, confirming the layered structure of a dispersed GO. e) Analysis of the nanocomposite GG/PEGDA10/GO_5 minUV_10 minMgCl2: Young's modulus, fracture stress, fracture strain, and toughness. For the Young's modulus, the blue areas represent the range of stiffness featuring the superficial articular cartilage, reported in ref. [ 5b ]. Data presented as mean ± SD, n = 5, p‐values are calculated using the Student's t‐tests, * p < 0.05, ** p < 0.01. Analyzed samples: GG/PEGDA10_5 minUV_10 minMgCl2, GG/PEGDA10/GO_5 minUV_10 minMgCl2.](https://figures.cochat.ai/paper-figures/017f66cbd95a48c4aaa5ba4027da733b/graphene-oxidedoped-gellan-gumpegda-bilayered-hydrogel-mimicking-the-mechanical-figure-3.jpg)
![Figure 4 a) Depiction of the set‐up used for testing the hydrogels (red block). b) Analysis of the composite hydrogels according to the Stribeck curve: static and dynamic regimes are marked with arrows, and the transition zone is magnified. Tests were performed evaluating both PBS and synthetic synovial fluid as lubricants. c) Values of coefficient of friction (COF) (mean ± SD) measured at the transition region varying the normal force (0.5, 5, and, 10 N). d) Analysis of the hydrogel wear upon the application of a constant normal force for 30 min at constant normal force (0.5 N) and rotational speed (0.05 mm−1). All tests were performed at 37 °C. In all graphs, the blue line represents the COF of the healthy articular cartilage.[ 5b ] Data presented as mean ± SD, n = 3, p‐values are calculated using the Student's t‐tests, * p < 0.05, ** p < 0.01. Analyzed samples: GG/PEGDA10_5 minUV_10 minMgCl2, GG/PEGDA10/GO_5 minUV_10 minMgCl2.](https://figures.cochat.ai/paper-figures/d0ff4034698540f6a2ed57cbaeea244d/graphene-oxidedoped-gellan-gumpegda-bilayered-hydrogel-mimicking-the-mechanical-figure-4.jpg)



Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Hunter, D. J., & Bierma-Zeinstra, S. (2019) · The Lancet · doi:10.1016/s0140-6736(19)30417-9 · Cited by 4,795
The Basic Science of Articular Cartilage: Structure, Composition, and Function
Sophia Fox, A. J., Bedi, A., & Rodeo, S. A. (2009) · Sports Health: A Multidisciplinary Approach · doi:10.1177/1941738109350438 · Cited by 2,774
Surgical and tissue engineering strategies for articular cartilage and meniscus repair
Kwon, H., Brown, W. E., Lee, C. A., Wang, D., Paschos, N., Hu, J. C., & Athanasiou, K. A. (2019) · Nature Reviews Rheumatology · doi:10.1038/s41584-019-0255-1 · Cited by 652
The Basic Science of Human Knee Menisci: Structure, Composition, and Function
Fox, A. J. S., Bedi, A., & Rodeo, S. A. (2012) · Sports Health: A Multidisciplinary Approach · doi:10.1177/1941738111429419 · Cited by 582
Buckwalter, J. A. (2002) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-200209000-00004 · Cited by 566
Tough and highly stretchable graphene oxide/polyacrylamide nanocomposite hydrogels
Liu, R., Liang, S., Tang, X.-Z., Yan, D., Li, X., & Yu, Z.-Z. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32541a · Cited by 500
Basic Science of Articular Cartilage and Osteoarthritis
Pearle, A. D., Warren, R. F., & Rodeo, S. A. (2005) · Clinics in Sports Medicine · doi:10.1016/j.csm.2004.08.007 · Cited by 476
The Role of Tissue Engineering in Articular Cartilage Repair and Regeneration
Zhang, L., Hu, J., & Athanasiou, K. A. (2009) · Critical Reviews™ in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v37.i1-2.10 · Cited by 475
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Modified Gellan Gum hydrogels with tunable physical and mechanical properties
Coutinho, D. F., Sant, S. V., Shin, H., Oliveira, J. T., Gomes, M. E., Neves, N. M., Khademhosseini, A., & Reis, R. L. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.06.035 · Cited by 430
Basic Science of Articular Cartilage
Carballo, C. B., Nakagawa, Y., Sekiya, I., & Rodeo, S. A. (2017) · Clinics in Sports Medicine · doi:10.1016/j.csm.2017.02.001 · Cited by 407
Shim, J.-H., Lee, J.-S., Kim, J. Y., & Cho, D.-W. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085014 · Cited by 379
Gellan gum: A new biomaterial for cartilage tissue engineering applications
Oliveira, J. T., Martins, L., Picciochi, R., Malafaya, P. B., Sousa, R. A., Neves, N. M., Mano, J. F., & Reis, R. L. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32574 · Cited by 370
A review on tough and sticky hydrogels
Peak, C. W., Wilker, J. J., & Schmidt, G. (2013) · Colloid and Polymer Science · doi:10.1007/s00396-013-3021-y · Cited by 364
Articular cartilage: from formation to tissue engineering
Camarero-Espinosa, S., Rothen-Rutishauser, B., Foster, E. J., & Weder, C. (2016) · Biomaterials Science · doi:10.1039/c6bm00068a · Cited by 328
In situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313
Tissue repair: The hidden drama
Krafts, K. P. (2010) · Organogenesis · doi:10.4161/org.6.4.12555 · Cited by 293
Gellan gum-based hydrogels for intervertebral disc tissue-engineering applications
Silva-Correia, J., Oliveira, J. M., Caridade, S. G., Oliveira, J. T., Sousa, R. A., Mano, J. F., & Reis, R. L. (2011) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.363 · Cited by 258
Cha, C., Shin, S. R., Gao, X., Annabi, N., Dokmeci, M. R., Tang, X. (., & Khademhosseini, A. (2014) · Small · doi:10.1002/smll.201302182 · Cited by 229
Cartilage-like mechanical properties of poly (ethylene glycol)-diacrylate hydrogels
Nguyen, Q. T., Hwang, Y., Chen, A. C., Varghese, S., & Sah, R. L. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.06.005 · Cited by 227
Lubrication mode analysis of articular cartilage using Stribeck surfaces
Gleghorn, J. P., & Bonassar, L. J. (2008) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2008.03.043 · Cited by 205
Mechanical anisotropy of the human knee articular cartilage in compression
Jurvelin, J. S., Buschmann, M. D., & Hunziker, E. B. (2003) · Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine · doi:10.1243/095441103765212712 · Cited by 194
Idaszek, J., Costantini, M., Karlsen, T. A., Jaroszewicz, J., Colosi, C., Testa, S., Fornetti, E., Bernardini, S., Seta, M., Kasarełło, K., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2622 · Cited by 188
Graphene Oxide Film as Solid Lubricant
Liang, H., Bu, Y., Zhang, J., Cao, Z., & Liang, A. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401495y · Cited by 183
Zhou, X., Nowicki, M., Cui, H., Zhu, W., Fang, X., Miao, S., Lee, S.-J., Keidar, M., & Zhang, L. G. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.049 · Cited by 182
Peters, A. E., Akhtar, R., Comerford, E. J., & Bates, K. T. (2018) · Scientific Reports · doi:10.1038/s41598-018-24258-6 · Cited by 180
Engineering Lubrication in Articular Cartilage
McNary, S. M., Athanasiou, K. A., & Reddi, A. H. (2011) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2011.0394 · Cited by 167
Biodegradable CSMA/PECA/Graphene Porous Hybrid Scaffold for Cartilage Tissue Engineering
Liao, J., Qu, Y., Chu, B., Zhang, X., & Qian, Z. (2015) · Scientific Reports · doi:10.1038/srep09879 · Cited by 165
Wang, B., Tang, W., Lu, H., & Huang, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01098a · Cited by 164
Wu, D., Yu, Y., Tan, J., Huang, L., Luo, B., Lu, L., & Zhou, C. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.040 · Cited by 157
(2009) · Repository of the University of Ljubljana (University of Ljubljana) · Cited by 152
Hu, J. Q., Kurokawa, T., Hiwatashi, K., Nakajima, T., Wu, Z. L., Liang, S. M., & Gong, J. P. (2012) · Macromolecules · doi:10.1021/ma3003664 · Cited by 149
Antons, J., Marascio, M., Nohava, J., Martin, R., Applegate, L. A., Bourban, P. ‐., & Pioletti, D. P. (2018) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-018-6066-0 · Cited by 145
Chen, Q., Wei, D., Chen, H., Zhu, L., Jiao, C., Liu, G., Huang, L., Yang, J., Wang, L., & Zheng, J. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01938 · Cited by 143
Biomechanical properties of human articular cartilage under compressive loads
Boschetti, F., Pennati, G., Gervaso, F., Peretti, G. M., & Dubini, G. (2004) · Biorheology · doi:10.1177/0006355x2004041003004001 · Cited by 141
A low friction, biphasic and boundary lubricating hydrogel for cartilage replacement
Milner, P. E., Parkes, M., Puetzer, J. L., Chapman, R., Stevens, M. M., Cann, P. M., & Jeffers, J. R. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.002 · Cited by 140
Bi-layered micro-fibre reinforced hydrogels for articular cartilage regeneration
Castilho, M. D., Mouser, V. H. M., Chen, M., Malda, J., & Ito, K. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.030 · Cited by 140
Combinatorial scaffold morphologies for zonal articular cartilage engineering
Steele, J. A. M., McCullen, S. D., Callanan, A., Autefage, H., Accardi, M. A., Dini, D., & Stevens, M. M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.030 · Cited by 138
Ren, X., Wang, F., Chen, C., Gong, X., Yin, L., & Yang, L. (2016) · BMC Musculoskeletal Disorders · doi:10.1186/s12891-016-1130-8 · Cited by 138
Kim, K., Lam, J., Lu, S., Spicer, P. P., Lueckgen, A., Tabata, Y., Wong, M. E., Jansen, J. A., Mikos, A. G., & Kasper, F. K. (2013) · Journal of Controlled Release · doi:10.1016/j.jconrel.2013.03.013 · Cited by 135
Krishnan, R., Park, S., Eckstein, F., & Ateshian, G. A. (2003) · Journal of Biomechanical Engineering · doi:10.1115/1.1610018 · Cited by 135
Graphite and Hybrid Nanomaterials as Lubricant Additives
Zhang, Z. J., Simionesie, D., & Schaschke, C. J. (2014) · Lubricants · doi:10.3390/lubricants2020044 · Cited by 132
Bi-layer collagen/microporous electrospun nanofiber scaffold improves the osteochondral regeneration
Zhang, S., Chen, L., Jiang, Y., Cai, Y., Xu, G., Tong, T., Zhang, W., Wang, L., Ji, J., Shi, P., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.04.003 · Cited by 129
Analysis of Cell Viability by the alamarBlue AssayPreprint
Kumar, P., Nagarajan, A. G., & Uchil, P. D. (2018) · Cold Spring Harbor Protocols · doi:10.1101/pdb.prot095489 · Cited by 129
Tissue and Organ 3D Bioprinting
Xia, Z., Jin, S., & Ye, K. (2018) · SLAS Technology · doi:10.1177/2472630318760515 · Cited by 128
Cell-Assembled Graphene Biocomposite for Enhanced Chondrogenic Differentiation
Lee, W. C., Lim, C. H. Y. X., Kenry, Su, C., Loh, K. P., & Lim, C. T. (2014) · Small · doi:10.1002/smll.201401635 · Cited by 123
Double Network Hydrogels that Mimic the Modulus, Strength, and Lubricity of Cartilage
Means, A. K., Shrode, C. S., Whitney, L. V., Ehrhardt, D. A., & Grunlan, M. A. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00237 · Cited by 123
Bonifacio, M. A., Gentile, P., Ferreira, A. M., Cometa, S., & Giglio, E. D. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.064 · Cited by 122
Engineering osteochondral constructs through spatial regulation of endochondral ossification
Sheehy, E. J., Vinardell, T., Buckley, C. T., & Kelly, D. J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.11.008 · Cited by 121
Chen, H., Malheiro, A., van Blitterswijk, C., Mota, C., Wieringa, P. A., & Moroni, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07151 · Cited by 118
Tang, J., Chen, S., Jia, Y., Ma, Y., Xie, H., Quan, X., & Ding, Q. (2019) · Carbon · doi:10.1016/j.carbon.2019.09.055 · Cited by 109
Wang, J., Qiao, J., Wang, J., Zhu, Y., & Jiang, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02194 · Cited by 101
Mechanical Properties of End-Linked PEG/PDMS Hydrogels
Cui, J., Lackey, M. A., Tew, G. N., & Crosby, A. J. (2012) · Macromolecules · doi:10.1021/ma300593g · Cited by 100
Three-Dimensional Printing and Injectable Conductive Hydrogels for Tissue Engineering Application
Jiang, L., Wang, Y., Liu, Z., Ma, C., Yan, H., Xu, N., Gang, F., Wang, X., Zhao, L., & Sun, X. (2019) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2019.0100 · Cited by 92
Pattappa, G., Johnstone, B., Zellner, J., Docheva, D., & Angele, P. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20030484 · Cited by 90
Intra-articular injection of magnesium chloride attenuates osteoarthritis progression in rats
Yao, H., Xu, J., Zheng, N., Wang, J. L., Mok, S.-W., Lee, W., Shi, L., Wang, J. Y., Yue, J., Yung, P. S., et al. (2019) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2019.08.007 · Cited by 85
Meng, Y., Ye, L., Coates, P. D., & Twigg, P. C. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b12465 · Cited by 79
Biomechanics and Mechanobiology in Osteochondral Tissues
McMahon, L., O’Brien, F. J., & Prendergast, P. J. (2008) · Regenerative Medicine · doi:10.2217/17460751.3.5.743 · Cited by 77
He, B., Wu, J., Kirk, T. B., Carrino, J. A., Xiang, C., & Xu, J. (2014) · Arthritis Research & Therapy · doi:10.1186/ar4506 · Cited by 76
Stress-relaxing double-network hydrogel for chondrogenic differentiation of stem cells
Li, W., Wu, D., Hu, D., Zhu, S., Pan, C., Jiao, Y., Li, L., Luo, B., Zhou, C., & Lu, L. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110333 · Cited by 76
Kim, T., Kim, M.-S., Goh, T. S., Lee, J. S., Kim, Y. H., Yoon, S.-Y., & Lee, C. (2019) · Applied Sciences · doi:10.3390/app9091965 · Cited by 75
Tough Photocrosslinked Silk Fibroin/Graphene Oxide Nanocomposite Hydrogels
Balu, R., Reeder, S., Knott, R., Mata, J., de Campo, L., Dutta, N. K., & Choudhury, N. R. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b01141 · Cited by 74
3D Bioprinting: New Directions in Articular Cartilage Tissue Engineering
O’Connell, G. D., Garcia, J., & Amir, J. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00587 · Cited by 72
Structuring Hydrogel Surfaces for Tribology
Gombert, Y., Simič, R., Roncoroni, F., Dübner, M., Geue, T. M., & Spencer, N. D. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201901320 · Cited by 72
Li, L., Zhang, K., Wang, T., Wang, P., Xue, B., Cao, Y., Zhu, L., & Jiang, Q. Y. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108492 · Cited by 72
Osteochondral Autologous Transplantation
Sherman, S. L., Thyssen, E., & Nuelle, C. W. (2017) · Clinics in Sports Medicine · doi:10.1016/j.csm.2017.02.006 · Cited by 71
Self‐Folded Hydrogel Tubes for Implantable Muscular Tissue Scaffolds
Vannozzi, L., Yasa, I. C., Ceylan, H., Menciassi, A., Ricotti, L., & Sitti, M. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201700377 · Cited by 71
Self-citationZwitterionic Hydrogel Incorporated Graphene Oxide Nanosheets with Improved Strength and Lubricity
Wang, Z., Li, J., Jiang, L., Xiao, S., Liu, Y., & Luo, J. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b01640 · Cited by 69
3D Printed scaffolds with hierarchical biomimetic structure for osteochondral regeneration
Zhou, X., Esworthy, T. J., Lee, S.-J., Miao, S., Cui, H., Plesiniak, M., Fenniri, H., Webster, T. J., Rao, R. D., & Zhang, L. G. (2019) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2019.04.002 · Cited by 68
Sood, K., Kaur, J., Singh, H., Arya, S. K., & Khatri, M. (2019) · Toxicology Reports · doi:10.1016/j.toxrep.2019.07.009 · Cited by 65
Hurley, E. T., Murawski, C. D., Paul, J., Marangon, A., Prado, M. P., Xu, X., Hangody, L. R., Kennedy, J. G., Ackermann, J., Adams, S. B., et al. (2018) · Foot & Ankle International · doi:10.1177/1071100718781098 · Cited by 63
Dempsey, D. K., Carranza, C., Chawla, C. P., Gray, P., Eoh, J. H., Cereceres, S., & Cosgriff‐Hernandez, E. M. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35037 · Cited by 62
Articular cartilage regeneration and tissue engineering models: a systematic review
Walter, S. G., Ossendorff, R., & Schildberg, F. A. (2018) · Archives of Orthopaedic and Trauma Surgery · doi:10.1007/s00402-018-3057-z · Cited by 62
Advanced gellan gum-based glycol chitosan hydrogel for cartilage tissue engineering biomaterial
Lee, S., Choi, J. H., Park, A., Rim, M. A., Youn, J., Lee, W., Song, J. E., & Khang, G. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.04.135 · Cited by 62
Wang, Z.-N., Li, J., Liu, Y., & Luo, J. (2019) · Tribology International · doi:10.1016/j.triboint.2019.106026 · Cited by 59
Osteoarthritis year in review 2018: genetics and epigenetics
Jeffries, M. A. (2018) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2018.10.004 · Cited by 56
Gegg, C. A., & Yang, F. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.10.025 · Cited by 55
Shelmerdine, S. C., Simcock, I. C., Hutchinson, J. C., Aughwane, R., Melbourne, A., Nikitichev, D. I., Ong, J., Borghi, A., Cole, G., Kingham, E., et al. (2018) · British Journal of Radiology · doi:10.1259/bjr.20180306 · Cited by 54
Kang, D., Cai, Z., Jin, Q., & Zhang, H. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.021 · Cited by 53
Cartilage-on-cartilage cyclic loading induces mechanical and structural damage
Vazquez, K. J., Andreae, J., & Henak, C. R. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.06.023 · Cited by 51
Sharma, A., Desando, G., Petretta, M., Chawla, S., Bartolotti, I., Manferdini, C., Paolella, F., Gabusi, E., Trucco, D., Ghosh, S., et al. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01631 · Cited by 50
Self-citationJia, Z., Zhu, F., Li, X., Liang, Q., Zhuo, Z., Huang, J., Duan, L., Xiong, J., & Wang, D. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.115 · Cited by 48
Recent advances in three‐dimensional bioprinting of stem cells
Eswaramoorthy, S. D., Ramakrishna, S., & Rath, S. N. (2019) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2839 · Cited by 48
Modrogan, C., Pandele, A. M., Bobirică, C., Dobrotă, D., Dăncilă, A. M., Gârleanu, G., Orbuleţ, O. D., Borda, C., Gârleanu, D., & Orbeci, C. (2020) · Polymers · doi:10.3390/polym12051182 · Cited by 44
Cipollaro, L., Ciardulli, M. C., Porta, G. D., Peretti, G. M., & Maffulli, N. (2019) · British Medical Bulletin · doi:10.1093/bmb/ldz034 · Cited by 43
Ma, F., Ge, Y., Liu, N., Pang, X., Shen, X., & Tang, B. H. (2019) · Journal of Materials Chemistry B · doi:10.1039/c8tb01331d · Cited by 42
Wear simulation of total knee prostheses using load and kinematics waveforms from stair climbing
Jaber, S. A., Belvedere, C., Leardini, A., & Affatato, S. (2015) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2015.09.007 · Cited by 40
Self-citationXin, Y., Li, T., Gong, D., Xu, F., & Wang, M. (2017) · RSC Advances · doi:10.1039/c6ra27108a · Cited by 39
Bounds on the complex bulk and shear moduli of a two-dimensional two-phase viscoelastic composite
Gibiansky, L. V., & Lakes, R. S. (1997) · Mechanics of Materials · doi:10.1016/s0167-6636(96)00046-4 · Cited by 38
Zargar, S. M., Mehdikhani, M., & Rafienia, M. (2019) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911519876080 · Cited by 38
Gellan Gum-Based Hydrogels for Osteochondral Repair
Costa, L., Silva‐Correia, J., Oliveira, J. M., & Reis, R. L. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-76711-6_13 · Cited by 38
Marciano, O., Gonen, S., Levy, N., Teblum, E., Yemini, R., Nessim, G. D., Ruthstein, S., & Elbaz, L. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b02987 · Cited by 36
Self-citationCafarelli, A., Losi, P., Salgarella, A. R., Barsotti, M., Cioccio, I. B. D., Foffa, I., Vannozzi, L., Pingue, P., Soldani, G., & Ricotti, L. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.05.017 · Cited by 34
Self-citationZhao, W., Li, X., Gao, S., Feng, Y. C., & Huang, J. T. (2017) · Cellulose · doi:10.1007/s10570-017-1244-7 · Cited by 33
Gelcasting of alumina suspension using gellan gum as gelling agent
Zhang, Y., Xu, J., Qu, Y., Xi, X., & Yang, J. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.11.010 · Cited by 31
Effects of antigen removal on a porcine osteochondral xenograft for articular cartilage repair
Elder, S. H., Chenault, H., Gloth, P., Webb, K., Recinos, R., Wright, E., Moran, D., Butler, J. R., Borazjani, A., & Cooley, A. J. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36411 · Cited by 25
Osteochondral Autograft and Allograft Transplantation in the Talus
Ng, A. W. K., & Bernhard, K. (2017) · Clinics in Podiatric Medicine and Surgery · doi:10.1016/j.cpm.2017.05.004 · Cited by 24
Mun, S., Kim, H. C., Yadave, M., & Kim, J. (2015) · Composite Interfaces · doi:10.1080/09276440.2015.1018716 · Cited by 21
Osteochondral Tissue Engineering: Nanotechnology, Scaffolding-Related Developments and Translation
(2018) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-76711-6 · Cited by 20
Macro-Tribological Behaviors of Four Common Graphenes
Gao, X., Ju, P., Liu, X., Chen, L., Ji, L., Li, H., Zhou, H., & Chen, J. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b06013 · Cited by 17
Research works printed but not linked: 3
- Hooi Yee Ng K.‐X. A. L., 2017, JSM Bone Jt. Dis., 1, 1010
- Boschetti F., 2004, Biorheology, 41, 159
- Kumar P., 2018, Cold Spring Harbor Protoc., 6
Cited by
Bellier, N., Baipaywad, P., Ryu, N., Lee, J. Y., & Park, H. (2022) · Biomaterials Research · doi:10.1186/s40824-022-00313-2 · Cited by 175
“While GO and rGO nanoparticles can be incorporated into scaffolds for general tissue engineering, such as skin [188–190], cartilage [191, 192], bone [189, 193–195], and muscle tissue [196, 197] rGO is commonly incorporated into nanofibers to enhance their electroconductivity, which is a significant factor in cardiac a…”
BackgroundTolabi, H., Davari, N., Khajehmohammadi, M., Malektaj, H., Nazemi, K., Vahedi, S., Ghalandari, B., Reis, R. L., Ghorbani, F., & Oliveira, J. M. (2023) · Advanced Materials · doi:10.1002/adma.202208852 · Cited by 160
Roadmap for 2D materials in biotribological/biomedical applications – A review
Marian, M., Berman, D., Nečas, D., Emami, N., Ruggiero, A., & Rosenkranz, A. (2022) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2022.102747 · Cited by 84
Ricotti, L., Cafarelli, A., Manferdini, C., Trucco, D., Vannozzi, L., Gabusi, E., Fontana, F., Dolzani, P., Saleh, Y., Lenzi, E., et al. (2024) · ACS Nano · doi:10.1021/acsnano.3c08738 · Cited by 89
Self-citationCai, Z., Tang, Y., Wei, Y. Z., Wang, P., & Zhang, H. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.062 · Cited by 81
Metadata
- Authors
- Trucco, D., Vannozzi, L., Teblum, E., Telkhozhayeva, M., Nessim, G. D., Affatato, S., Al‐Haddad, H., Lisignoli, G., & Ricotti, L.
- Affiliations
- Scuola Superiore Sant'Anna (IT)
- Bar-Ilan University (IL)
- Istituto Ortopedico Rizzoli (IT)
- Corresponding author
- Trucco, Diego
- Lisignoli, Gina
- Ricotti, Leonardo
- ORCID
- Venue
- Advanced Healthcare Materials
- Publisher
- Wiley
- Published
- 2021-02-15
- Volume
- 10
- Issue
- 7
- Pages
- e2001434-e2001434
- ISSN
- 2192-2640 (ISSN-L)
- 2192-2659
- PMC
- PMC11468639
- OpenAlex
- W3131237248
- Cited by
- 94
- References
- 102
- Citations by year
- 2026: 15 · 2025: 6 · 2024: 26 · 2023: 16 · 2022: 22 · 2021: 9
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Update notices
- correction (2021-06-23)
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Advanced Healthcare Materials (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- Funders
- European Commission (HORIZON2020, 814413)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Rheumatology › Osteoarthritis Treatment and Mechanisms
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- articular cartilage, gellan gum, poly(ethylene glycol) diacrylate, graphene oxide doping, cartilage biomechanics, cartilage lubrication, Young's modulus, friction, anti-wear, knee simulator, chondrocytes, cartilage defect repair
- MeSH terms
- Cartilage, Articular, Graphite, Humans, Lubrication, Polysaccharides, Bacterial, Hydrogels, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.