The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Design Rules for Phase‐Change Materials in Data Storage Applications
Abstract
Phase‐change materials can rapidly and reversibly be switched between an amorphous and a crystalline phase. Since both phases are characterized by very different optical and electrical properties, these materials can be employed for rewritable optical and electrical data storage. Hence, there are considerable efforts to identify suitable materials, and to optimize them with respect to specific applications. Design rules that can explain why the materials identified so far enable phase‐change based devices would hence be very beneficial. This article describes materials that have been successfully employed and dicusses common features regarding both typical structures and bonding mechanisms. It is shown that typical structural motifs and electronic properties can be found in the crystalline state that are indicative for resonant bonding, from which the employed contrast originates. The occurence of resonance is linked to the composition, thus providing a design rule for phase‐change materials. This understanding helps to unravel characteristic properties such as electrical and thermal conductivity which are discussed in the subsequent section. Then, turning to the transition kinetics between the phases, the current understanding and modeling of the processes of amorphization and crystallization are discussed. Finally, present approaches for improved high‐capacity optical discs and fast non‐volatile electrical memories, that hold the potential to succeed present‐day’s Flash memory, are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phase-change materials for rewriteable data storage
Wuttig, M., & Yamada, N. (2007) · Nature Materials · doi:10.1038/nmat2009 · Cited by 3,655
Self-citationReversible Electrical Switching Phenomena in Disordered Structures
Ovshinsky, S. R. (1968) · Physical Review Letters · doi:10.1103/physrevlett.21.1450 · Cited by 3,144
Relaxation in glassforming liquids and amorphous solids
Angell, C. A., Ngai, K. L., McKenna, G. B., McMillan, P. F., & Martin, S. W. (2000) · Journal of Applied Physics · doi:10.1063/1.1286035 · Cited by 2,238
Topology of covalent non-crystalline solids I: Short-range order in chalcogenide alloys
Phillips, J. C. (1979) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(79)90033-4 · Cited by 1,876
Near-Field Optics: Microscopy, Spectroscopy, and Surface Modification Beyond the Diffraction Limit
Betzig, E., & Trautman, J. K. (1992) · Science · doi:10.1126/science.257.5067.189 · Cited by 1,808
Rapid-phase transitions of GeTe-Sb2Te3 pseudobinary amorphous thin films for an optical disk memory
Yamada, N., Ohno, E., Nishiuchi, K., Akahira, N., & Takao, M. (1991) · Journal of Applied Physics · doi:10.1063/1.348620 · Cited by 1,469
Understanding the phase-change mechanism of rewritable optical media
Kolobov, A. V., Fons, P., Frenkel, A. I., Ankudinov, A. L., Tominaga, J., & Uruga, T. (2004) · Nature Materials · doi:10.1038/nmat1215 · Cited by 1,313
Resonant bonding in crystalline phase-change materials
Shportko, K., Kremers, S., Woda, M., Lencer, D., Robertson, J., & Wuttig, M. (2008) · Nature Materials · doi:10.1038/nmat2226 · Cited by 1,152
Self-citationLow-cost and nanoscale non-volatile memory concept for future silicon chips
Lankhorst, M. H. R., Ketelaars, B. W. S. M. M., & Wolters, R. A. M. (2005) · Nature Materials · doi:10.1038/nmat1350 · Cited by 1,101
Phase change memory technology
Burr, G. W., Breitwisch, M. J., Franceschini, M., Garetto, D., Gopalakrishnan, K., Jackson, B., Kurdi, B., Lam, C., Lastras, L. A., Padilla, A., et al. (2010) · Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena · doi:10.1116/1.3301579 · Cited by 916
Cited by
Sosso, G. C., Chen, J., Cox, S. J., Fitzner, M., Pedevilla, P., Zen, A., & Michaelides, A. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00744 · Cited by 959
Zhang, W., Mazzarello, R., Wuttig, M., & Ma, E. (2019) · Nature Reviews Materials · doi:10.1038/s41578-018-0076-x · Cited by 885
Self-citationA comprehensive review on emerging artificial neuromorphic devices
Zhu, J., Zhang, T., Yang, Y., & Huang, R. (2020) · Applied Physics Reviews · doi:10.1063/1.5118217 · Cited by 758
Metal–organic frameworks (MOFs) beyond crystallinity: amorphous MOFs, MOF liquids and MOF glasses
Fonseca, J., Gong, T., Jiao, L., & Jiang, H.-L. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta01043c · Cited by 543
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Metadata
- Authors
- Lencer, D., Salinga, M., & Wuttig, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2011-04-05
- Volume
- 23
- Issue
- 18
- Pages
- 2030-2058
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2171570486
- Cited by
- 524
- References
- 67
- FWCI
- 15.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design Rules for Phase‐Change Materials in Data Storage Applications. https://app.cochat.ai/papers/10.1002/adma.201004255
- The paper
- Lencer, D., Salinga, M., & Wuttig, M. (2011). Design Rules for Phase‐Change Materials in Data Storage Applications. Advanced Materials. https://doi.org/10.1002/adma.201004255
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.