The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Open accessAbstract
All-component 3D-printed lithium-ion batteries are fabricated by printing graphene-oxide-based composite inks and solid-state gel polymer electrolyte. An entirely 3D-printed full cell features a high electrode mass loading of 18 mg cm(-2) , which is normalized to the overall area of the battery. This all-component printing can be extended to the fabrication of multidimensional/multiscale complex-structures of more energy-storage devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Wu, Z.-S., Ren, W., Xu, L., Li, F., & Cheng, H.-M. (2011) · ACS Nano · doi:10.1021/nn2006249 · Cited by 2,071
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
A review of recent developments in membrane separators for rechargeable lithium-ion batteries
Lee, H., Yanilmaz, M., Toprakci, O., Fu, K., & Zhang, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01432d · Cited by 1,467
Self-citation3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Feng, D., Wang, K., Wei, Z., Chen, Y.-P., Simon, C. M., Arvapally, R. K., Martin, R. L., Bosch, M., Liu, T.-F., Fordham, S., et al. (2015) · Nature Communications · doi:10.1038/ncomms7106 · Cited by 789
Self-citationHighly thermally conductive and mechanically strong graphene fibers
Xin, G., Yao, T., Sun, H., Scott, S. M., Shao, D., Wang, G., & Lian, J. (2015) · Science · doi:10.1126/science.aaa6502 · Cited by 740
Graphene-modified LiFePO4 cathode for lithium ion battery beyond theoretical capacity
Lung-Hao Hu, B., Wu, F.-Y., Lin, C.-T., Khlobystov, A. N., & Li, L.-J. (2013) · Nature Communications · doi:10.1038/ncomms2705 · Cited by 645
Pikul, J. H., Gang Zhang, H., Cho, J., Braun, P. V., & King, W. P. (2013) · Nature Communications · doi:10.1038/ncomms2747 · Cited by 635
High-strength cellular ceramic composites with 3D microarchitecture
Bauer, J., Hengsbach, S., Tesari, I., Schwaiger, R., & Kraft, O. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1315147111 · Cited by 563
Graphene modified LiFePO4 cathode materials for high power lithium ion batteries
Zhou, X., Wang, F., Zhu, Y., & Liu, Z. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03287e · Cited by 498
Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices
Kitson, P. J., Rosnes, M. H., Sans, V., Dragone, V., & Cronin, L. (2012) · Lab on a Chip · doi:10.1039/c2lc40761b · Cited by 484
3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T.-W., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 432
Graphene oxide dispersions: tuning rheology to enable fabrication
Naficy, S., Jalili, R., Aboutalebi, S. H., Gorkin III, R. A., Konstantinov, K., Innis, P. C., Spinks, G. M., Poulin, P., & Wallace, G. G. (2014) · Mater. Horiz. · doi:10.1039/c3mh00144j · Cited by 368
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Active mixing of complex fluids at the microscale
Ober, T. J., Foresti, D., & Lewis, J. A. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509224112 · Cited by 306
Printing in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
3D printed microfluidic devices with integrated versatile and reusable electrodes
Erkal, J. L., Selimovic, A., Gross, B. C., Lockwood, S. Y., Walton, E. L., McNamara, S., Martin, R. S., & Spence, D. M. (2014) · Lab Chip · doi:10.1039/c4lc00171k · Cited by 287
Mesoscale assembly of chemically modified graphene into complex cellular networks
Barg, S., Perez, F. M., Ni, N., do Vale Pereira, P., Maher, R. C., Garcia-Tuñon, E., Eslava, S., Agnoli, S., Mattevi, C., & Saiz, E. (2014) · Nature Communications · doi:10.1038/ncomms5328 · Cited by 285
3D Printing of Reduced Graphene Oxide Nanowires
Kim, J. H., Chang, W. S., Kim, D., Yang, J. R., Han, J. T., Lee, G., Kim, J. T., & Seol, S. K. (2015) · Advanced Materials · doi:10.1002/adma.201404380 · Cited by 258
Three dimensional (3D) printed electrodes for interdigitated supercapacitors
Zhao, C., Wang, C., Gorkin, R., Beirne, S., Shu, K., & Wallace, G. G. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.013 · Cited by 213
3D porous LiFePO4/graphene hybrid cathodes with enhanced performance for Li-ion batteries
Yang, J., Wang, J., Wang, D., Li, X., Geng, D., Liang, G., Gauthier, M., Li, R., & Sun, X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.032 · Cited by 213
Kim, S.-H., Choi, K.-H., Cho, S.-J., Choi, S., Park, S., & Lee, S.-Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01394 · Cited by 209
The effect of graphene wrapping on the performance of LiFePO4 for a lithium ion battery
Wei, W., Lv, W. Z., Wu, M., Su, F., He, Y., Li, B., Kang, F., & Yang, Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.01.070 · Cited by 132
Song, L., Khoerunnisa, F., Gao, W., Dou, W., Hayashi, T., Kaneko, K., Endo, M., & Ajayan, P. M. (2012) · Carbon · doi:10.1016/j.carbon.2012.09.060 · Cited by 123
Synchrotron radiation and quantum gravity
Ellis, J. R., Mavromatos, N. E., Nanopoulos, D. V., & Sakharov, A. (2004) · Nature · doi:10.1038/nature02481 · Cited by 68
Zhang, J., Cai, Y., Wu, J., & Yao, J. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.03.016 · Cited by 43
Synthesis and characterization of LiFePO4 cathode material dispersed with nano-structured carbon
Yang, S. T., Zhao, N. H., Dong, H., Yang, J., & Yue, H. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.04.013 · Cited by 40
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Latest advances in supercapacitors: from new electrode materials to novel device designs
Wang, F., Wu, X., Yuan, X., Liu, Z., Zhang, Y., Fu, L., Zhu, Y., Zhou, Q., Wu, Y., & Huang, W. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00205j · Cited by 2,011
Smith, A. T., LaChance, A. M., Zeng, S., Liu, B., & Sun, L. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.02.004 · Cited by 1,643
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Self-citationLi, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
Self-citation
Metadata
- Authors
- Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., Wang, Z., Xu, Y., & Hu, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2016-02-02
- Volume
- 28
- Issue
- 13
- Pages
- 2587-2594
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2322477478
- Cited by
- 758
- References
- 39
- FWCI
- 33.84
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.