The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Progress in Understanding Degradation Mechanisms and Improving Stability in Organic Photovoltaics
Abstract
Understanding the degradation mechanisms of organic photovoltaics is particularly important, as they tend to degrade faster than their inorganic counterparts, such as silicon and cadmium telluride. An overview is provided here of the main degradation mechanisms that researchers have identified so far that cause extrinsic degradation from oxygen and water, intrinsic degradation in the dark, and photo‐induced burn‐in. In addition, it provides methods for researchers to identify these mechanisms in new materials and device structures to screen them more quickly for promising long‐term performance. These general strategies will likely be helpful in other photovoltaic technologies that suffer from insufficient stability, such as perovskite solar cells. Finally, the most promising lifetime results are highlighted and recommendations to improve long‐term performance are made. To prevent degradation from oxygen and water for sufficiently long time periods, OPVs will likely need to be encapsulated by barrier materials with lower permeation rates of oxygen and water than typical flexible substrate materials. To improve stability at operating temperatures, materials will likely require glass transition temperatures above 100 °C. Methods to prevent photo‐induced burn‐in are least understood, but recent research indicates that using pure materials with dense and ordered film morphologies can reduce the burn‐in effect.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Liu, Y., Zhao, J., Li, Z., Mu, C., Ma, W., Hu, H., Jiang, K., Lin, H., Ade, H., & Yan, H. (2014) · Nature Communications · doi:10.1038/ncomms6293 · Cited by 3,106
Recent Advances in Bulk Heterojunction Polymer Solar Cells
Lu, L., Zheng, T., Wu, Q., Schneider, A. M., Zhao, D., & Yu, L. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00098 · Cited by 2,550
Origin of the Open Circuit Voltage of Plastic Solar Cells
Brabec, C. J., Cravino, A., Meissner, D., Sariciftci, N. S., Fromherz, T., Rispens, M. T., Sanchez, L., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200110)11:5<374::aid-adfm374>3.0.co;2-w · Cited by 1,808
25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation
Heeger, A. J. (2014) · Advanced Materials · doi:10.1002/adma.201304373 · Cited by 1,723
CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar Cells
Jeng, J., Chiang, Y., Lee, M., Peng, S., Guo, T., Chen, P., & Wen, T. (2013) · Advanced Materials · doi:10.1002/adma.201301327 · Cited by 1,572
Perovskite solar cells employing organic charge-transport layers
Malinkiewicz, O., Yella, A., Lee, Y. H., Espallargas, G. M., Graetzel, M., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.341 · Cited by 1,474
Beaujuge, P. M., & Fréchet, J. M. J. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2073643 · Cited by 1,427
Photoinduced Polymerization of Solid C 60 Films
Rao, A. M., Zhou, P., Wang, K., Hager, G. T., Holden, J. M., Wang, Y., Lee, W. T., Bi, X.-X., Eklund, P. C., Cornett, D. S., et al. (1993) · Science · doi:10.1126/science.259.5097.955 · Cited by 1,139
Consensus stability testing protocols for organic photovoltaic materials and devices
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.036 · Cited by 989
Photochemical reactions of organic crystals
Ramamurthy, V., & Venkatesan, K. (1987) · Chemical Reviews · doi:10.1021/cr00078a009 · Cited by 949
Molecular Semiconductors in Organic Photovoltaic Cells
Hains, A. W., Liang, Z., Woodhouse, M. A., & Gregg, B. A. (2010) · Chemical Reviews · doi:10.1021/cr9002984 · Cited by 935
High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells
Small, C. E., Chen, S., Subbiah, J., Amb, C. M., Tsang, S.-W., Lai, T.-H., Reynolds, J. R., & So, F. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.317 · Cited by 931
Hau, S. K., Yip, H.-L., Baek, N. S., Zou, J., O’Malley, K., & Jen, A. K.-Y. (2008) · Applied Physics Letters · doi:10.1063/1.2945281 · Cited by 841
Processable Low-Bandgap Polymers for Photovoltaic Applications
Boudreault, P.-L. T., Najari, A., & Leclerc, M. (2011) · Chemistry of Materials · doi:10.1021/cm1021855 · Cited by 827
Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells
Mihailetchi, V. D., Blom, P. W. M., Hummelen, J. C., & Rispens, M. T. (2003) · Journal of Applied Physics · doi:10.1063/1.1620683 · Cited by 812
Degradation of organic solar cells due to air exposure
Kawano, K., Pacios, R., Poplavskyy, D., Nelson, J., Bradley, D. D. C., & Durrant, J. R. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.06.041 · Cited by 734
Solar cell efficiency tables (version 47)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2016) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2728 · Cited by 650
Diketopyrrolopyrrole (DPP)-based materials for organic photovoltaics
Qu, S., & Tian, H. (2012) · Chemical Communications · doi:10.1039/c2cc17886a · Cited by 643
Factors Limiting Device Efficiency in Organic Photovoltaics
Janssen, R. A. J., & Nelson, J. (2013) · Advanced Materials · doi:10.1002/adma.201202873 · Cited by 617
Functional fullerenes for organic photovoltaics
Li, C.-Z., Yip, H.-L., & Jen, A. K.-Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15126j · Cited by 521
The case for organic photovoltaics
Darling, S. B., & You, F. (2013) · RSC Advances · doi:10.1039/c3ra42989j · Cited by 508
Bartelt, J. A., Beiley, Z. M., Hoke, E. T., Mateker, W. R., Douglas, J. D., Collins, B. A., Tumbleston, J. R., Graham, K. R., Amassian, A., Ade, H., et al. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200637 · Cited by 445
Self-citationGraff, G. L., Williford, R. E., & Burrows, P. E. (2004) · Journal of Applied Physics · doi:10.1063/1.1768610 · Cited by 414
Effect of traps on the performance of bulk heterojunction organic solar cells
Mandoc, M. M., Kooistra, F. B., Hummelen, J. C., de Boer, B., & Blom, P. W. M. (2007) · Applied Physics Letters · doi:10.1063/1.2821368 · Cited by 413
Blakesley, J. C., & Neher, D. (2011) · Physical Review B · doi:10.1103/physrevb.84.075210 · Cited by 412
Gas diffusion barriers on polymers using Al2O3 atomic layer deposition
Groner, M. D., George, S. M., McLean, R. S., & Carcia, P. F. (2006) · Applied Physics Letters · doi:10.1063/1.2168489 · Cited by 399
Modeling of the nominal operating cell temperature based on outdoor weathering
Koehl, M., Heck, M., Wiesmeier, S., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.020 · Cited by 365
Phase Diagram of P3HT/PCBM Blends and Its Implication for the Stability of Morphology
Zhao, J., Swinnen, A., Van Assche, G., Manca, J., Vanderzande, D., & Mele, B. V. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp804151a · Cited by 350
Schmidbauer, S., Hohenleutner, A., & König, B. (2013) · Advanced Materials · doi:10.1002/adma.201205022 · Cited by 349
Structures and properties of conjugated Donor–Acceptor copolymers for solar cell applications
Zhang, Z., & Wang, J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14951f · Cited by 348
Yang, X., van Duren, J. K. J., Janssen, R. A. J., Michels, M. A. J., & Loos, J. (2004) · Macromolecules · doi:10.1021/ma035620+ · Cited by 348
Selective Interlayers and Contacts in Organic Photovoltaic Cells
Ratcliff, E. L., Zacher, B., & Armstrong, N. R. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2002259 · Cited by 334
Azzopardi, B., Emmott, C. J. M., Urbina, A., Krebs, F. C., Mutale, J., & Nelson, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01766g · Cited by 320
Wang, I. C., Tai, L. A., Lee, D. D., Kanakamma, P. P., Shen, C. K.-F., Luh, T.-Y., Cheng, C. H., & Hwang, K. C. (1999) · Journal of Medicinal Chemistry · doi:10.1021/jm990144s · Cited by 291
Photocrosslinkable Polythiophenes for Efficient, Thermally Stable, Organic Photovoltaics
Kim, B. J., Miyamoto, Y., Ma, B., & Fréchet, J. M. J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900043 · Cited by 276
Photoinduced Degradation of Polymer and Polymer–Fullerene Active Layers: Experiment and Theory
Reese, M. O., Nardes, A. M., Rupert, B. L., Larsen, R. E., Olson, D. C., Lloyd, M. T., Shaheen, S. E., Ginley, D. S., Rumbles, G., & Kopidakis, N. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001079 · Cited by 276
A Quantitative Study of PCBM Diffusion during Annealing of P3HT:PCBM Blend Films
Watts, B., Belcher, W. J., Thomsen, L., Ade, H., & Dastoor, P. C. (2009) · Macromolecules · doi:10.1021/ma901444u · Cited by 255
Savagatrup, S., Printz, A. D., O'Connor, T. F., Zaretski, A. V., Rodriquez, D., Sawyer, E. J., Rajan, K. M., Acosta, R. I., Root, S. E., & Lipomi, D. J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02657h · Cited by 255
Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb
Manceau, M., Bundgaard, E., Carlé, J. E., Hagemann, O., Helgesen, M., Søndergaard, R., Jørgensen, M., & Krebs, F. C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03105d · Cited by 253
Cowan, S. R., Leong, W. L., Banerji, N., Dennler, G., & Heeger, A. J. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100514 · Cited by 229
Materials and methods for encapsulation of OPV: A review
Ahmad, J., Bazaka, K., Anderson, L. J., White, R. D., & Jacob, M. V. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.06.027 · Cited by 222
Accurate efficiency determination and stability studies of conjugated polymer/fullerene solar cells
Kroon, J. M., Wienk, M. M., Verhees, W. J. H., & Hummelen, J. C. (2002) · Thin Solid Films · doi:10.1016/s0040-6090(01)01589-9 · Cited by 215
A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules
Krebs, F. C., Gevorgyan, S. A., Gholamkhass, B., Holdcroft, S., Schlenker, C., Thompson, M. E., Thompson, B. C., Olson, D., Ginley, D. S., Shaheen, S. E., et al. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.07.015 · Cited by 212
Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells
Dupont, S. R., Oliver, M. S., Krebs, F. C., & Dauskardt, R. H. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.10.012 · Cited by 209
Procedures and Practices for Evaluating Thin‐Film Solar Cell Stability
Roesch, R., Faber, T., von Hauff, E., Brown, T. M., Lira‐Cantu, M., & Hoppe, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501407 · Cited by 176
Chang, C., Wu, C., Chen, S., Cui, C., Cheng, Y., Hsu, C., Wang, Y., & Li, Y. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201103782 · Cited by 170
The state of organic solar cells—A meta analysis
Jørgensen, M., Carlé, J. E., Søndergaard, R. R., Lauritzen, M., Dagnæs-Hansen, N. A., Byskov, S. L., Andersen, T. R., Larsen-Olsen, T. T., Böttiger, A. P. L., Andreasen, B., et al. (2013) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.05.034 · Cited by 165
Griffini, G., Douglas, J. D., Piliego, C., Holcombe, T. W., Turri, S., Fréchet, J. M. J., & Mynar, J. L. (2011) · Advanced Materials · doi:10.1002/adma.201004743 · Cited by 164
Photochemical stability of high efficiency PTB7:PC 70 BM solar cell blends
Hollis, J. R., Wade, J., Tsoi, W. C., Soon, Y. W., Durrant, J. R., & Kim, J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05641h · Cited by 157
Characterization of polymer solar cells by TOF-SIMS depth profiling
Bulle‐Lieuwma, C. W. T., van Gennip, W. J. H., van Duren, J. K. J., Jonkheijm, P., Janssen, R. A. J., & Niemantsverdriet, J. W. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00756-0 · Cited by 153
Ashraf, R. S., Schroeder, B. C., Bronstein, H. A., Huang, Z., Thomas, S., Kline, R. J., Brabec, C. J., Rannou, P., Anthopoulos, T. D., Durrant, J. R., et al. (2013) · Advanced Materials · doi:10.1002/adma.201300027 · Cited by 140
Photo- and thermal degradation of MDMO-PPV:PCBM blends
Chambon, S., Rivaton, A., Gardette, J., et al. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.10.015 · Cited by 135
Photostability of organic materials used in polymer solar cells
Rivaton, A., Tournebize, A., Gaume, J., Bussière, P., Gardette, J., & Thérias, S. (2013) · Polymer International · doi:10.1002/pi.4656 · Cited by 117
Mateker, W. R., Heumueller, T., Cheacharoen, R., Sachs‐Quintana, I. T., McGehee, M. D., Warnan, J., Beaujuge, P. M., Liu, X., & Bazan, G. C. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02341 · Cited by 112
Self-citationStabilizing polymer‐based bulk heterojunction solar cells via crosslinking
Wantz, G., Derue, L., Dautel, O. J., Rivaton, A., Hudhomme, P., & Lartigau‐Dagron, C. (2014) · Polymer International · doi:10.1002/pi.4712 · Cited by 111
Mateker, W. R., Douglas, J. D., Cabanetos, C., Sachs‐Quintana, I. T., Bartelt, J. A., Hoke, E. T., Labban, A. E., Beaujuge, P. M., Fréchet, J. M. J., & McGehee, M. D. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41328d · Cited by 108
Self-citationRole of Molecular Weight on the Mechanical Device Properties of Organic Polymer Solar Cells
Bruner, C., & Dauskardt, R. H. (2014) · Macromolecules · doi:10.1021/ma402215j · Cited by 108
Hösel, M., Søndergaard, R. R., Jørgensen, M., & Krebs, F. C. (2013) · Advanced Engineering Materials · doi:10.1002/adem.201300172 · Cited by 107
Light-induced degradation of the P3HT-based solar cells active layer
Manceau, M., Rivaton, A., Gardette, J., Guillerez, S., & Lemaître, N. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.09.021 · Cited by 107
Cohesion and device reliability in organic bulk heterojunction photovoltaic cells
Brand, V., Bruner, C., & Dauskardt, R. H. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.11.035 · Cited by 106
Carlé, J. E., Helgesen, M., Madsen, M. V., Bundgaard, E., & Krebs, F. C. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc31859a · Cited by 100
Involvement of Singlet Oxygen in the Solid‐State Photochemistry of P3HT
Manceau, M., Rivaton, A., & Gardette, J. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200800421 · Cited by 99
Tanenbaum, D. M., Dam, H. F., Rösch, R., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.09.064 · Cited by 94
Mechanism of Water Vapor Transport through PET/AlOxNy Gas Barrier Films
Erlat, A. G., Henry, B. M., Grovenor, C. R. M., Briggs, A. G. D., Chater, R. J., & Tsukahara, Y. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp036244y · Cited by 92
Adhesion properties of inverted polymer solarcells: Processing and film structure parameters
Dupont, S. R., Vörösházi, E., Heremans, P. L., & Dauskardt, R. H. (2013) · Organic Electronics · doi:10.1016/j.orgel.2013.02.022 · Cited by 84
First principles study of photo-oxidation degradation mechanisms in P3HT for organic solar cells
Sai, N., Leung, K., Zádor, J., & Henkelman, G. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00146j · Cited by 84
Enhanced Organic Solar Cell Stability by Polymer (PCPDTBT) Side Chain Functionalization
Kesters, J., Verstappen, P., Raymakers, J., Vanormelingen, W., Drijkoningen, J., D’Haen, J., Manca, J. V., Lutsen, L., Vanderzande, D. J. M., & Maes, W. (2015) · Chemistry of Materials · doi:10.1021/cm504391k · Cited by 78
PCDTBT based solar cells: one year of operation under real-world conditions
Zhang, Y., Bovill, E., Kingsley, J. W., Buckley, A., Yi, H., Iraqi, A., Wang, T., & Lidzey, D. G. (2016) · Scientific Reports · doi:10.1038/srep21632 · Cited by 76
Molecular-Scale Understanding of Cohesion and Fracture in P3HT:Fullerene Blends
Tummala, N. R., Bruner, C., Risko, C. M., Brédas, J., & Dauskardt, R. H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02202 · Cited by 74
Saito, M., Osaka, I., Suzuki, Y., Takimiya, K., Okabe, T., Ikeda, S., & Asano, T. (2015) · Scientific Reports · doi:10.1038/srep14202 · Cited by 63
Angmo, D., Sommeling, P. M., Gupta, R., Hösel, M., Gevorgyan, S. A., Kroon, J. M., Kulkarni, G. U., & Krebs, F. C. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400002 · Cited by 59
Villevieille, C., Ebner, M., Gómez‐Cámer, J. L., Marone, F., Novák, P., & Wood, V. C. (2015) · Advanced Materials · doi:10.1002/adma.201403792 · Cited by 50
Palermo, E. F., Darling, S. B., & McNeil, A. J. (2014) · Journal of Materials Chemistry C · doi:10.1039/c3tc32512a · Cited by 49
Savagatrup, S., Rodriquez, D., Printz, A. D., Sieval, A. B., Hummelen, J. C., & Lipomi, D. J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00638 · Cited by 49
Kesters, J., Kudret, S., Bertho, S., Brande, N. P. V. D., Defour, M., Mele, B. V., Penxten, H., Lutsen, L., Manca, J. V., Vanderzande, D. J. M., et al. (2013) · Organic Electronics · doi:10.1016/j.orgel.2013.12.006 · Cited by 41
Induced photodegradation of quinoxaline based copolymers for photovoltaic applications
Gedefaw, D., Tessarolo, M., Prosa, M., Bolognesi, M., Henriksson, P., Zhuang, W., Seri, M., Muccini, M., & Andersson, M. R. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.08.015 · Cited by 29
Highly Stable Polymer Solar Cells Based on Poly(dithienobenzodithiophene-co-thienothiophene)
Shin, N., Yun, H., Yoon, Y., Son, H. J., Ju, S., Kwon, S., Kim, B., & Kim, Y. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00514 · Cited by 29
Heliatek sets new organic photovoltaic world record efficiency of 13.2%
(2016) · Renewable energy focus · doi:10.1016/j.ref.2016.04.002 · Cited by 20
Lee, P.-H., Torng, C., & Lin, Y. (2011) · Applied Mathematical Modelling · doi:10.1016/j.apm.2011.02.022 · Cited by 16
Cited by
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
Self-citationZhang, J., Tan, H. S., Guo, X., Facchetti, A., & Yan, H. (2018) · Nature Energy · doi:10.1038/s41560-018-0181-5 · Cited by 1,008
Zhao, J., Deng, Y., Wei, H., Zheng, X., Yu, Z., Shao, Y., Shield, J. E., & Huang, J. (2017) · Science Advances · doi:10.1126/sciadv.aao5616 · Cited by 974
Organic Photodetectors for Next‐Generation Wearable Electronics
Chow, P. C. Y., & Someya, T. (2020) · Advanced Materials · doi:10.1002/adma.201902045 · Cited by 779
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Metadata
- Authors
- Mateker, W. R., & McGehee, M. D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2016-12-22
- Volume
- 29
- Issue
- 10
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2566847878
- Cited by
- 460
- References
- 81
- FWCI
- 19.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.