The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Anisotropic, Transparent Films with Aligned Cellulose Nanofibers
Abstract
Transparent films or substrates are ubiquitously used in photonics and optoelectronics, with glass and plastics as traditional choice of materials. Transparent films made of cellulose nanofibers are reported recently. However, all these films are isotropic in nature. This work, for the first time, reports a remarkably facile and effective approach to fabricating anisotropic transparent films directly from wood. The resulting films exhibit an array of exceptional optical and mechanical properties. The well‐aligned cellulose nanofibers in natural wood are maintained during delignification, leading to an anisotropic film with high transparency (≈90% transmittance) and huge intensity ratio of transmitted light up to 350%. The anisotropic film with well‐aligned cellulose nanofibers has a mechanical tensile strength of up to 350 MPa, nearly three times of that of a film with randomly distributed cellulose nanofibers. Atomistic mechanics modeling further reveals the dependence of the film mechanical properties on the alignment of cellulose nanofibers through the film thickness direction. This study also demonstrates guided liquid transport in a mesoporous, anisotropic wood film and its possible application in enabling new nanoelectronic devices. These unique and highly desirable properties of the anisotropic transparent film can potentially open up a range of green electronics and nanofluidics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Diagnostics for the Developing World: Microfluidic Paper-Based Analytical Devices
Martinez, A. W., Phillips, S. T., Whitesides, G. M., & Carrilho, E. (2010) · Analytical Chemistry · doi:10.1021/ac9013989 · Cited by 2,674
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Paper-based microfluidic point-of-care diagnostic devices
Yetisen, A. K., Akram, M. S., & Lowe, C. R. (2013) · Lab on a Chip · doi:10.1039/c3lc50169h · Cited by 1,943
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Three-dimensional microfluidic devices fabricated in layered paper and tape
Martinez, A. W., Phillips, S. T., & Whitesides, G. M. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0810903105 · Cited by 1,246
Optically Transparent Nanofiber Paper
Nogi, M., Iwamoto, S., Nakagaito, A. N., & Yano, H. (2009) · Advanced Materials · doi:10.1002/adma.200803174 · Cited by 1,074
Toward Flexible Polymer and Paper‐Based Energy Storage Devices
Nyholm, L., Nyström, G., Mihranyan, A., & Strømme, M. (2011) · Advanced Materials · doi:10.1002/adma.201004134 · Cited by 1,066
Chen, W., Yu, H., Liu, Y., Chen, P., Zhang, M., & Hai, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.10.040 · Cited by 971
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
High-performance green flexible electronics based on biodegradable cellulose nanofibril paper
Jung, Y. H., Chang, T.-H., Zhang, H., Yao, C., Zheng, Q., Yang, V. W., Mi, H., Kim, M., Cho, S. J., Park, D.-W., et al. (2015) · Nature Communications · doi:10.1038/ncomms8170 · Cited by 891
The virial theorem and stress calculation in molecular dynamics
Tsai, D. H. (1979) · The Journal of Chemical Physics · doi:10.1063/1.437577 · Cited by 685
Transparent paper: fabrications, properties, and device applications
Zhu, H., Fang, Z., Preston, C., Li, Y., & Hu, L. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43024c · Cited by 550
Self-citationHydrodynamic alignment and assembly of nanofibrils resulting in strong cellulose filaments
Håkansson, K. M. O., Fall, A. B., Lundell, F., Yu, S., Krywka, C., Roth, S. V., Santoro, G., Kvick, M., Prahl Wittberg, L., Wågberg, L., et al. (2014) · Nature Communications · doi:10.1038/ncomms5018 · Cited by 523
Strong and Tough Cellulose Nanopaper with High Specific Surface Area and Porosity
Sehaqui, H., Zhou, Q., Ikkala, O., & Berglund, L. A. (2011) · Biomacromolecules · doi:10.1021/bm2008907 · Cited by 510
Transparent and conductive paper from nanocellulose fibers
Hu, L., Zheng, G., Yao, J., Liu, N., Weil, B., Eskilsson, M., Karabulut, E., Ruan, Z., Fan, S., Bloking, J. T., et al. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23635d · Cited by 510
Self-citationCellulose microfibril angle in the cell wall of wood fibres
Barnett, J. R., & Bonham, V. A. (2004) · Biological Reviews · doi:10.1017/s1464793103006377 · Cited by 494
Energy and environmental nanotechnology in conductive paper and textiles
Hu, L., & Cui, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02414d · Cited by 413
Self-citationChen, L., Wang, Q., Hirth, K., Baez, C., Agarwal, U. P., & Zhu, J. Y. (2015) · Cellulose · doi:10.1007/s10570-015-0615-1 · Cited by 408
First-principles and classical molecular dynamics simulation of shocked polymers
Mattsson, T. R., Lane, J. M. D., Cochrane, K. R., Desjarlais, M. P., Thompson, A. P., Pierce, F., & Grest, G. S. (2010) · Physical Review B · doi:10.1103/physrevb.81.054103 · Cited by 333
Bacterial Cellulose Production and its Industrial Applications
Keshk, S. M. (2014) · Journal of Bioprocessing & Biotechniques · doi:10.4172/2155-9821.1000150 · Cited by 332
Tang, H., Butchosa, N., & Zhou, Q. (2015) · Advanced Materials · doi:10.1002/adma.201404565 · Cited by 225
Toivonen, M. S., Kaskela, A., Rojas, O. J., Kauppinen, E. I., & Ikkala, O. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502566 · Cited by 211
Ultra-slim flexible glass for roll-to-roll electronic device fabrication
Garner, S., Glaesemann, S., & Li, X. (2014) · Applied Physics A · doi:10.1007/s00339-014-8468-2 · Cited by 126
Formation and Structure of Wood
Parham, R. A., & Gray, R. L. (1984) · Advances in chemistry series · doi:10.1021/ba-1984-0207.ch001 · Cited by 108
Wang, Q., Zhu, J. Y., & Considine, J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302967m · Cited by 105
Rafsanjani, A., Stiefel, M., Jefimovs, K., Mokso, R., Derome, D., & Carmeliet, J. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0126 · Cited by 102
Ansari, F., Sjöstedt, A., Larsson, P. T., Berglund, L. A., & Wågberg, L. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.03.024 · Cited by 76
Brush, S. B., Bellon, M. R., Hijmans, R. J., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/iti0115112 · Cited by 57
IPS-LCD Using a Glass Substrate and an Anisotropic Polymer Film
Lin, Y.-H., Ren, H., Gauza, S., Wu, Y., Zhao, Y., Fang, J., & Wu, S.-T. T. (2006) · Journal of Display Technology · doi:10.1109/jdt.2005.863777 · Cited by 37
Cited by
Structure–property–function relationships of natural and engineered wood
Chen, C., Kuang, Y., Zhu, S., Burgert, I., Keplinger, T., Gong, A., Li, T., Berglund, L., Eichhorn, S. J., & Hu, L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0195-z · Cited by 1,295
Self-citationAdvanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Wood-based nanotechnologies toward sustainability
Jiang, F., Li, T., Li, Y., Zhang, Y., Gong, A., Dai, J., Hitz, E., Luo, W., & Hu, L. (2018) · Advanced Materials · doi:10.1002/adma.201703453 · Cited by 599
Self-citationRich Mesostructures Derived from Natural Woods for Solar Steam Generation
Jia, C., Li, Y., Yang, Z., Chen, G., Yao, Y., Jiang, F., Kuang, Y., Pastel, G., Xie, H., Yang, B., et al. (2017) · Joule · doi:10.1016/j.joule.2017.09.011 · Cited by 472
Self-citationLiang, C., Ruan, K., Zhang, Y., & Gu, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04482 · Cited by 347
Metadata
- Authors
- Zhu, M., Wang, Y., Zhu, S., Xu, L., Jia, C., Dai, J., Song, J., Yao, Y., Wang, Y., Li, Y., Henderson, D., Luo, W., Li, H., Minus, M. L., Li, T., & Hu, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-03-29
- Volume
- 29
- Issue
- 21
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2602348800
- Cited by
- 279
- References
- 33
- FWCI
- 7.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.