The DOI matches its Crossref record; 98 of the 98 references it cites were found in a registry or an index.
Anionic Redox in Rechargeable Lithium Batteries
Abstract
The extraordinarily high capacities delivered by lithium‐rich oxide cathodes, compared with conventional layered oxide electrodes, are a result of contributions from both cationic and anionic redox processes. This phenomenon has invoked a lot of research exploring new kinds of lithium‐rich oxides with multiple‐electron redox processes. Though proposed many years ago, anionic redox is now regarded to be crucial in further developing high‐capacity electrodes. A basic overview of the previous work on anionic redox is given, and issues related to electronic and geometric structures are discussed, including the principles of activation, reversibility, and the energy barrier of anionic redox. Anionic redox also leads to capacity loss and structural degradation, as well as voltage hysteresis, which shows the importance of controlling anionic redox reactions. Finally, the techniques used for characterizing anionic redox processes are reviewed to aid the rational choice of techniques in future studies. Important perspectives are highlighted, which should instruct future work concerning anionic redox processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Band gaps and electronic structure of transition-metal compounds
Zaanen, J., Sawatzky, G. A., & Allen, J. W. (1985) · Physical Review Letters · doi:10.1103/physrevlett.55.418 · Cited by 3,064
Mechanisms for Lithium Insertion in Carbonaceous Materials
Dahn, J. R., Zheng, T., Liu, Y., & Xue, J. S. (1995) · Science · doi:10.1126/science.270.5236.590 · Cited by 2,123
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
Cited by
Achieving high energy density and high power density with pseudocapacitive materials
Choi, C., Ashby, D. S., Butts, D. M., DeBlock, R. H., Wei, Q., Lau, J., & Dunn, B. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0142-z · Cited by 1,964
Temperature effect and thermal impact in lithium-ion batteries: A review
Ma, S., Jiang, M., Tao, P., Song, C., Wu, J., Wang, J., Deng, T., & Shang, W. (2018) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2018.11.002 · Cited by 1,674
Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries
Assat, G., & Tarascon, J.-M. (2018) · Nature Energy · doi:10.1038/s41560-018-0097-0 · Cited by 1,588
An Overview on the Advances of LiCoO2 Cathodes for Lithium‐Ion Batteries
Lyu, Y., Wu, X., Wang, K., Feng, Z., Cheng, T., Liu, Y., Wang, M., Chen, R., Xu, L., Zhou, J., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000982 · Cited by 890
Lattice oxygen redox chemistry in solid-state electrocatalysts for water oxidation
Zhang, N., & Chai, Y. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01277k · Cited by 706
Assat, G., Foix, D., Delacourt, C., Iadecola, A., Dedryvère, R., & Tarascon, J.-M. (2017) · Nature Communications · doi:10.1038/s41467-017-02291-9 · Cited by 671
He, W., Guo, W., Wu, H., Lin, L., Liu, Q., Han, X., Xie, Q., Liu, P., Zheng, H., Wang, L., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005937 · Cited by 626
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Clément, R. J., Lun, Z., & Ceder, G. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02803j · Cited by 560
Unified picture of anionic redox in Li/Na-ion batteries
Ben Yahia, M., Vergnet, J., Saubanère, M., & Doublet, M.-L. (2019) · Nature Materials · doi:10.1038/s41563-019-0318-3 · Cited by 510
Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries?
Liu, Q., Hu, Z., Li, W., Zou, C., Jin, H., Wang, S., Chou, S., & Dou, S.-X. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02997a · Cited by 468
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
Toward Green Battery Cells: Perspective on Materials and Technologies
Dühnen, S., Betz, J., Kolek, M., Schmuch, R., Winter, M., & Placke, T. (2020) · Small Methods · doi:10.1002/smtd.202000039 · Cited by 395
Liu, J., Wang, J., Ni, Y., Zhang, K., Cheng, F., & Chen, J. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.028 · Cited by 349
Paving the Path toward Reliable Cathode Materials for Aluminum‐Ion Batteries
Wu, F., Yang, H., Bai, Y., & Wu, C. (2019) · Advanced Materials · doi:10.1002/adma.201806510 · Cited by 332
Unraveling Anionic Redox for Sodium Layered Oxide Cathodes: Breakthroughs and Perspectives
Ren, H., Li, Y., Ni, Q., Bai, Y., Zhao, H., & Wu, C. (2022) · Advanced Materials · doi:10.1002/adma.202106171 · Cited by 297
Anionic Redox Activity in a Newly Zn‐Doped Sodium Layered Oxide P2‐Na2/3Mn1−yZnyO2 (0 < y < 0.23)
Bai, X., Sathiya, M., Mendoza‐Sánchez, B., Iadecola, A., Vergnet, J., Dedryvère, R., Saubanère, M., Abakumov, A. M., Rozier, P., & Tarascon, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802379 · Cited by 287
Zhang, M., Kitchaev, D. A., Lebens-Higgins, Z., Vinckeviciute, J., Zuba, M., Reeves, P. J., Grey, C. P., Whittingham, M. S., Piper, L. F. J., Van der Ven, A., et al. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00416-1 · Cited by 264
Nanoscale Phenomena in Lithium-Ion Batteries
Jung, S.-K., Hwang, I., Chang, D., Park, K.-Y., Kim, S. J., Seong, W. M., Eum, D., Park, J., Kim, B., Kim, J., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00405 · Cited by 253
Metadata
- Authors
- Li, B., & Xia, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-06-29
- Volume
- 29
- Issue
- 48
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2727395732
- Cited by
- 338
- References
- 98
- FWCI
- 14.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.