The DOI matches its Crossref record.
Reversible, Fast, and Wide‐Range Oxygen Sensor Based on Nanostructured Organometal Halide Perovskite
Open accessAbstract
Nanostructured materials characterized by high surface–volume ratio hold the promise to constitute the active materials for next‐generation sensors. Solution‐processed hybrid organohalide perovskites, which have been extensively used in the last few years for optoelectronic applications, are characterized by a self‐assembled nanostructured morphology, which makes them an ideal candidate for gas sensing. Hitherto, detailed studies of the dependence of their electrical characteristics on the environmental atmosphere have not been performed, and even the effect of a ubiquitous gas such as O 2 has been widely overlooked. Here, the electrical response of organohalide perovskites to oxygen is studied. Surprisingly, a colossal increase (3000‐fold) in the resistance of perovskite‐based lateral devices is found when measured in a full oxygen atmosphere, which is ascribed to a trap healing mechanism originating from an O 2‐mediated iodine vacancies filling. A variation as small as 70 ppm in the oxygen concentration can be detected. The effect is fast (<400 ms) and fully reversible, making organohalide perovskites ideal active materials for oxygen sensing. The effect of oxygen on the electrical characteristics of organohalide perovskites must be taken into deep consideration for the design and optimization of any other perovskite‐based (opto‐) electronic device working in ambient conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
Wu, Z., Yang, J., Sun, X., Wu, Y., Wang, L., Meng, G., Kuang, D., Guo, X., Qu, W., Du, B., et al. (2021) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2021.129772 · Cited by 142
Liang, Y., Wu, Z., Wei, Y., Ding, Q., Zilberman, M., Tao, K., Xie, X., & Wu, J. (2022) · Nano-Micro Letters · doi:10.1007/s40820-021-00787-0 · Cited by 127
Jiao, W., He, J., & Zhang, L. (2020) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.127786 · Cited by 66
Real-time and ultrasensitive humidity sensor based on lead-free Cs2SnCl6 perovskites
Pi, M., Wu, D., Wang, J., Chen, K., He, J., Yang, J., Zhang, D., Chen, S., & Tang, X. (2022) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2021.131084 · Cited by 65
Brintakis, K., Gagaoudakis, E., Kostopoulou, A., Faka, V., Argyrou, A., Binas, V., Kiriakidis, G., & Stratakis, E. (2019) · Nanoscale Advances · doi:10.1039/c9na00219g · Cited by 58
High sensitivity H2S gas sensors using lead halide perovskite nanoparticles
Ayesh, A. I., Alghamdi, S. A., Salah, B., Bennett, S. H., Crean, C., & Sellin, P. J. (2022) · Results in Physics · doi:10.1016/j.rinp.2022.105333 · Cited by 41
Lin, Y., Wu, Z., Li, C., Ding, Q., Tao, K., Zhai, K., Chen, M., Zilberman, M., Xie, X., & Wu, J. (2022) · EcoMat · doi:10.1002/eom2.12220 · Cited by 30
Zhang, H., Zhang, L., Zhao, Z., Xin, W., Niu, J., He, J., & Jiao, W. (2024) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2023.135238 · Cited by 28
Novel lead-free CsCu2I3 film gas sensor for NH3 detection at room temperature
Wang, Y., Ou, K., Ni, Y., Tang, Y., Zhang, W., Xia, Y., & Wang, H. (2024) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2024.115508 · Cited by 14
Metadata
- Authors
- Stoeckel, M., Gobbi, M., Bonacchi, S., Liscio, F., Ferlauto, L., Orgiu, E., & Samorì, P.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-07-25
- Volume
- 29
- Issue
- 38
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2737045574
- Cited by
- 161
- References
- 0
- FWCI
- 6.38
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.