The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Lithiophilic Cu‐CuO‐Ni Hybrid Structure: Advanced Current Collectors Toward Stable Lithium Metal Anodes
Abstract
Metallic lithium (Li) is a promising anode material for next‐generation rechargeable batteries. However, the dendrite growth of Li and repeated formation of solid electrolyte interface during Li plating and stripping result in low Coulombic efficiency, internal short circuits, and capacity decay, hampering its practical application. In the development of stable Li metal anode, the current collector is recognized as a critical component to regulate Li plating. In this work, a lithiophilic Cu‐CuO‐Ni hybrid structure is synthesized as a current collector for Li metal anodes. The low overpotential of CuO for Li nucleation and the uniform Li+ ion flux induced by the formation of Cu nanowire arrays enable effective suppression of the growth of Li dendrites. Moreover, the surface Cu layer can act as a protective layer to enhance structural durability of the hybrid structure in long‐term running. As a result, the Cu‐CuO‐Ni hybrid structure achieves a Coulombic efficiency above 95% for more than 250 cycles at a current density of 1 mA cm−2 and 580 h (290 cycles) stable repeated Li plating and stripping in a symmetric cell.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Raman spectra of CuO nanocrystals
Xu, J. F., Ji, W., Shen, Z. X., Li, W. S., Tang, S. H., Ye, X. R., Jia, D. Z., & Xin, X. Q. (1999) · Journal of Raman Spectroscopy · doi:10.1002/(sici)1097-4555(199905)30:5<413::aid-jrs387>3.0.co;2-n · Cited by 713
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Cover Picture: A Metallaanthracene and Derived Metallaanthraquinone (Angew. Chem. Int. Ed. 1/2017)
Frogley, B. J., & Wright, L. J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201610955 · Cited by 529
3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries
Jin, C., Sheng, O., Luo, J., Yuan, H., Fang, C., Zhang, W., Huang, H., Gan, Y., Xia, Y., Liang, C., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.015 · Cited by 501
Self-citationArtificial Protection Film on Lithium Metal Anode toward Long‐Cycle‐Life Lithium–Oxygen Batteries
Liu, Q., Xu, J., Yuan, S., Chang, Z., Xu, D., Yin, Y., Li, L., Zhong, H., Jiang, Y., Yan, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501490 · Cited by 482
High-capacity, low-tortuosity, and channel-guided lithium metal anode
Zhang, Y., Luo, W., Wang, C., Li, Y., Chen, C., Song, J., Dai, J., Hitz, E. M., Xu, S., Yang, C., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1618871114 · Cited by 472
Ryou, M., Lee, Y. M., Lee, Y., Winter, M., & Bieker, P. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402953 · Cited by 412
Cohen, Y. S., Cohen, Y., & Aurbach, D. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp002526b · Cited by 360
A Novel Method for Preparing Copper Nanorods and Nanowires
Liu, Z., & Bando, Y. (2003) · Advanced Materials · doi:10.1002/adma.200390073 · Cited by 325
Guo, J., Wen, Z., Wu, M., Jin, J., & Liu, Y. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.12.008 · Cited by 273
Wang, J., Zhang, Q., Li, X., Xu, D., Wang, Z., Guo, H., & Zhang, K. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.02.012 · Cited by 246
Self-citationJin, S., Xin, S., Wang, L., Du, Z., Cao, L., Chen, J., Kong, X., Gong, M., Lu, J., Zhu, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602704 · Cited by 216
Self-citationLithium Batteries with Nearly Maximum Metal Storage
Raji, A.-R. O., Villegas Salvatierra, R., Kim, N. D., Fan, X., Li, Y., Silva, G. A. L., Sha, J., & Tour, J. M. (2017) · ACS Nano · doi:10.1021/acsnano.7b02731 · Cited by 196
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Future prospects of the lithium metal anode
Takehara, Z. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02546-3 · Cited by 135
Zhang, Q., Wang, J., Xu, D., Wang, Z., Li, X., & Zhang, K. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14767c · Cited by 116
Self-citation
Cited by
Yang, Q., Liang, G., Guo, Y., Liu, Z., Yan, B., Wang, D., Huang, Z., Li, X., Fan, J., & Zhi, C. (2019) · Advanced Materials · doi:10.1002/adma.201903778 · Cited by 689
Liu, D.-H., Bai, Z., Li, M., Yu, A., Luo, D., Liu, W., Yang, L., Lu, J., Amine, K., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00636b · Cited by 483
Nanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439
Wang, T., Wang, P., Pan, L., He, Z., Dai, L., Wang, L., Liu, S., Jun, S. C., Lu, B., Liang, S., et al. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203523 · Cited by 402
Solid–Solution-Based Metal Alloy Phase for Highly Reversible Lithium Metal Anode
Jin, S., Ye, Y., Niu, Y., Xu, Y., Jin, H., Wang, J., Sun, Z., Cao, A., Wu, X., Luo, Y., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c01811 · Cited by 391
Metadata
- Authors
- Wu, S., Zhang, Z., Lan, M., Yang, S., Cheng, J., Cai, J., Shen, J., Zhu, Y., Zhang, K., & Zhang, W.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-01-12
- Volume
- 30
- Issue
- 9
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2783440691
- Cited by
- 288
- References
- 29
- FWCI
- 17.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.