The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Fused Tris(thienothiophene)‐Based Electron Acceptor with Strong Near‐Infrared Absorption for High‐Performance As‐Cast Solar Cells
Abstract
A fused tris(thienothiophene) (3TT) building block is designed and synthesized with strong electron‐donating and molecular packing properties, where three thienothiophene units are condensed with two cyclopentadienyl rings. Based on 3TT, a fused octacylic electron acceptor (FOIC) is designed and synthesized, using strong electron‐withdrawing 2‐(5/6‐fluoro‐3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)‐malononitrile as end groups. FOIC exhibits absorption in 600–950 nm region peaked at 836 nm with extinction coefficient of up to 2 × 10 5m–1 cm–1, low bandgap of 1.32 eV, and high electron mobility of 1.2 × 10–3 cm 2 V–1 s–1. Compared with its counterpart ITIC3 based on indacenothienothiophene core, FOIC exhibits significantly upshifted highest occupied molecular orbital level, slightly downshifted lowest unoccupied molecular orbital level, significantly redshifted absorption, and higher mobility. The as‐cast organic solar cells (OSCs) based on blends of PTB7‐Th donor and FOIC acceptor without additional treatments exhibit power conversion efficiencies (PCEs) as high as 12.0%, which is much higher than that of PTB7‐Th: ITIC3 (8.09%). The as‐cast semitransparent OSCs based on the same blends show PCEs of up to 10.3% with an average visible transmittance of 37.4%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Lin, Y., Wang, J., Zhang, Z., Bai, H., Li, Y., Zhu, D., & Zhan, X. (2015) · Advanced Materials · doi:10.1002/adma.201404317 · Cited by 4,258
Self-citationSynthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
Zhao, W., Li, S., Yao, H., Zhang, S., Zhang, Y., Yang, B., & Hou, J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02677 · Cited by 2,790
Recent Advances in Bulk Heterojunction Polymer Solar Cells
Lu, L., Zheng, T., Wu, Q., Schneider, A. M., Zhao, D., & Yu, L. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00098 · Cited by 2,550
Efficient organic solar cells processed from hydrocarbon solvents
Zhao, J., Li, Y., Yang, G., Jiang, K., Lin, H., Ade, H., Ma, W., & Yan, H. (2016) · Nature Energy · doi:10.1038/nenergy.2015.27 · Cited by 2,367
Self-citationLiquid-crystalline semiconducting polymers with high charge-carrier mobility
McCulloch, I., Heeney, M., Bailey, C., Genevicius, K., MacDonald, I., Shkunov, M., Sparrowe, D., Tierney, S., Wagner, R., Zhang, W., et al. (2006) · Nature Materials · doi:10.1038/nmat1612 · Cited by 2,151
Li, S., Ye, L., Zhao, W., Zhang, S., Mukherjee, S., Ade, H., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201602776 · Cited by 1,380
Liao, S., Jhuo, H., Cheng, Y., & Chen, S. (2013) · Advanced Materials · doi:10.1002/adma.201301476 · Cited by 1,259
Baran, D., Ashraf, R. S., Hanifi, D. A., Abdelsamie, M., Gasparini, N., Röhr, J. A., Holliday, S., Wadsworth, A., Lockett, S., Neophytou, M., et al. (2017) · Nature Materials · doi:10.1038/nmat4797 · Cited by 1,027
Bin, H., Gao, L., Zhang, Z.-G., Yang, Y., Zhang, Y., Zhang, C., Chen, S., Xue, L., Yang, C., Xiao, M., et al. (2016) · Nature Communications · doi:10.1038/ncomms13651 · Cited by 987
High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics
Lin, Y., Zhao, F., He, Q., Huo, L., Wu, Y., Parker, T. C., Ma, W., Sun, Y., Wang, C., Zhu, D., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b02004 · Cited by 980
Self-citationA Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency
Lin, Y., He, Q., Zhao, F., Huo, L., Mai, J., Lu, X., Su, C.-J., Li, T., Wang, J., Zhu, J., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00853 · Cited by 945
Self-citationFullerene derivative acceptors for high performance polymer solar cells
He, Y., & Li, Y. (2011) · Phys. Chem. Chem. Phys. · doi:10.1039/c0cp01178a · Cited by 941
Yang, Y., Zhang, Z.-G., Bin, H., Chen, S., Gao, L., Xue, L., Yang, C., & Li, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09110 · Cited by 876
Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
Dai, S., Zhao, F., Zhang, Q., Lau, T.-K., Li, T., Liu, K., Ling, Q., Wang, C., Lu, X., You, W., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12755 · Cited by 864
Self-citationAn Efficient Triple‐Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11%
Chen, C., Chang, W., Yoshimura, K., Ohya, K., You, J., Gao, J., Hong, Z., & Yang, Y. (2014) · Advanced Materials · doi:10.1002/adma.201402072 · Cited by 785
Single‐Junction Binary‐Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency
Zhao, F., Dai, S., Wu, Y., Zhang, Q., Wang, J., Jiang, L., Ling, Q., Wei, Z., Ma, W., You, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700144 · Cited by 699
Self-citationElectrical characteristics and efficiency of single-layer organic light-emitting diodes
Malliaras, G. G., Salem, J. R., Brock, P. J., & Scott, C. (1998) · Physical Review B · doi:10.1103/physrevb.58.r13411 · Cited by 663
Donor–acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells
Wu, J.-S., Cheng, S.-W., Cheng, Y.-J., & Hsu, C.-S. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00250d · Cited by 629
High-performance fullerene-free polymer solar cells with 6.31% efficiency
Lin, Y., Zhang, Z.-G., Bai, H., Wang, J., Yao, Y., Li, Y., Zhu, D., & Zhan, X. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03424d · Cited by 624
Self-citationOligomer Molecules for Efficient Organic Photovoltaics
Lin, Y., & Zhan, X. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00363 · Cited by 601
Self-citationDeng, D., Zhang, Y., Zhang, J., Wang, Z., Zhu, L., Fang, J., Xia, B., Wang, Z., Lu, K., Ma, W., et al. (2016) · Nature Communications · doi:10.1038/ncomms13740 · Cited by 596
Self-citationA SAXS/WAXS/GISAXS Beamline with Multilayer Monochromator
Hexemer, A., Bras, W., Glossinger, J., Schaible, E., Gann, E., Kirian, R., MacDowell, A., Church, M., Rude, B., & Padmore, H. (2010) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/247/1/012007 · Cited by 540
Cui, C., Wong, W.-Y., & Li, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00446a · Cited by 508
Kan, B., Feng, H., Wan, X., Liu, F., Ke, X., Wang, Y., Wang, Y., Zhang, H., Li, C., Hou, J., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01170 · Cited by 474
Gann, E., Young, A. T., Collins, B. A., Yan, H., Nasiatka, J., Padmore, H. A., Ade, H., Hexemer, A., & Wang, C. (2012) · Review of Scientific Instruments · doi:10.1063/1.3701831 · Cited by 443
Zhang, G., Zhang, K., Yin, Q., Jiang, X.-F., Wang, Z., Xin, J., Ma, W., Yan, H., Huang, F., & Cao, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b11991 · Cited by 435
Self-citationPolymer Homo‐Tandem Solar Cells with Best Efficiency of 11.3%
Zhou, H., Zhang, Y., Mai, C., Collins, S. D., Bazan, G. C., Nguyen, T., & Heeger, A. J. (2015) · Advanced Materials · doi:10.1002/adma.201404220 · Cited by 431
Wang, W., Yan, C., Lau, T., Wang, J., Liu, K., Fan, Y., Lu, X., & Zhan, X. (2017) · Advanced Materials · doi:10.1002/adma.201701308 · Cited by 421
Self-citationMapping Polymer Donors toward High‐Efficiency Fullerene Free Organic Solar Cells
Lin, Y., Zhao, F., Wu, Y., Chen, K., Xia, Y., Li, G., Prasad, S. K. K., Zhu, J., Huo, L., Bin, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604155 · Cited by 403
Self-citationChen, S., Liu, Y., Zhang, L., Chow, P. C. Y., Wang, Z., Zhang, G., Ma, W., & Yan, H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01606 · Cited by 348
Self-citationA planar electron acceptor for efficient polymer solar cells
Wu, Y., Bai, H., Wang, Z., Cheng, P., Zhu, S., Wang, Y., Ma, W., & Zhan, X. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02477c · Cited by 314
Self-citationQiu, N., Zhang, H., Wan, X., Li, C., Ke, X., Feng, H., Kan, B., Zhang, H., Zhang, Q., Lu, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604964 · Cited by 301
Liu, F., Zhou, Z., Zhang, C., Zhang, J., Hu, Q., Vergote, T., Liu, F., Russell, T. P., & Zhu, X. (2017) · Advanced Materials · doi:10.1002/adma.201606574 · Cited by 288
Enhancing Performance of Nonfullerene Acceptors via Side‐Chain Conjugation Strategy
Wang, J., Wang, W., Wang, X., Wu, Y., Zhang, Q., Yan, C., Ma, W., You, W., & Zhan, X. (2017) · Advanced Materials · doi:10.1002/adma.201702125 · Cited by 274
Self-citationMobility-Controlled Performance of Thick Solar Cells Based on Fluorinated Copolymers
Li, W., Albrecht, S., Yang, L., Roland, S., Tumbleston, J. R., McAfee, T., Yan, L., Kelly, M. A., Ade, H., Neher, D., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5067724 · Cited by 267
Self-citationCredgington, D., Jamieson, F. C., Walker, B., Nguyen, T., & Durrant, J. R. (2012) · Advanced Materials · doi:10.1002/adma.201104738 · Cited by 229
Li, S., Ye, L., Zhao, W., Zhang, S., Ade, H., & Hou, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700183 · Cited by 203
High‐Mobility Conjugated Polymers Based on Fused‐Thiophene Building Blocks
Liu, Y., Liu, Y., & Zhan, X. (2011) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201000677 · Cited by 107
Self-citationScherrer grain-size analysis adapted to grazing-incidence scattering with area detectors. Erratum
Smilgies, D. (2013) · Journal of Applied Crystallography · doi:10.1107/s0021889812050054 · Cited by 62
Cited by
Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics
Yuan, J., Huang, T., Cheng, P., Zou, Y., Zhang, H., Yang, J. L., Chang, S.-Y., Zhang, Z., Huang, W., Wang, R., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08386-9 · Cited by 481
The principles, design and applications of fused-ring electron acceptors
Wang, J., Xue, P., Jiang, Y., Huo, Y., & Zhan, X. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00409-2 · Cited by 454
Self-citationPolymer Donors for High‐Performance Non‐Fullerene Organic Solar Cells
Fu, H., Wang, Z., & Sun, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201806291 · Cited by 436
Effect of Isomerization on High-Performance Nonfullerene Electron Acceptors
Wang, J., Zhang, J., Xiao, Y., Xiao, T., Zhu, R., Yan, C., Fu, Y., Lu, G., Lu, X., Marder, S. R., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04027 · Cited by 400
Self-citationZheng, Z., Yao, H., Ye, L., Xu, Y., Zhang, S., & Hou, J. (2020) · Materials Today · doi:10.1016/j.mattod.2019.10.023 · Cited by 377
Metadata
- Authors
- Li, T., Dai, S., Ke, Z., Yang, L., Wang, J., Yan, C., Ma, W., & Zhan, X.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-01-15
- Volume
- 30
- Issue
- 10
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2783793463
- Cited by
- 384
- References
- 41
- FWCI
- 28.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.