The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
A Bioinspired Interface Design for Improving the Strength and Electrical Conductivity of Graphene‐Based Fibers
Abstract
Graphene‐based fibers (GBFs) are attractive for next‐generation wearable electronics due to their potentially high mechanical strength, superior flexibility, and excellent electrical and thermal conductivity. Many efforts have been devoted to improving these properties of GBFs in the past few years. However, fabricating GBFs with high strength and electrical conductivity simultaneously remains as a great challenge. Herein, inspired by nacre‐like multilevel structural design, an interface‐reinforced method is developed to improve both the mechanical property and electrical conductivity of the GBFs by introducing polydopamine‐derived N‐doped carbon species as resistance enhancers, binding agents, and conductive connection “bridges.” Remarkably, both the tensile strength and electrical conductivity of the obtained GBFs are significantly improved to ≈724 MPa and ≈6.6 × 10 4 S m−1, respectively, demonstrating great superiority compared to previously reported similar GBFs. These outstanding integrated performances of the GBFs provide it with great application potential in the fields of flexible and wearable microdevices such as sensors, actuators, supercapacitors, and batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liu, Y., Ai, K., & Lu, L. (2014) · Chemical Reviews · doi:10.1021/cr400407a · Cited by 4,794
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Yang, S., Feng, X., Wang, X., & Müllen, K. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100170 · Cited by 1,109
He, W., Jiang, C., Wang, J., & Lu, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201404333 · Cited by 386
Cited by
Choi, S., Han, S. I., Kim, D., Hyeon, T., & Kim, D.-H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00706c · Cited by 591
Material‐Based Approaches for the Fabrication of Stretchable Electronics
Kim, D. C., Shim, H. J., Lee, W., Koo, J. H., & Kim, D. (2020) · Advanced Materials · doi:10.1002/adma.201902743 · Cited by 438
Zhang, S., Liu, H., Yang, S., Shi, X., Zhang, D., Shan, C., Mi, L., Liu, C., Shen, C., & Guo, Z. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00900 · Cited by 412
Stretchable fabric generates electric power from woven thermoelectric fibers
Sun, T., Zhou, B., Zheng, Q., Wang, L., Jiang, W., & Snyder, G. J. (2020) · Nature Communications · doi:10.1038/s41467-020-14399-6 · Cited by 390
Highly Electroconductive and Mechanically Strong Ti3C2TxMXene Fibers Using a Deformable MXene Gel
Shin, H., Eom, W., Lee, K. H., Jeong, W., Kang, D. J., & Han, T. H. (2021) · ACS Nano · doi:10.1021/acsnano.0c10255 · Cited by 343
Metadata
- Authors
- Ma, T., Gao, H., Cong, H., Yao, H., Wu, L., Yu, Z., Chen, S., & Yu, S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-02-27
- Volume
- 30
- Issue
- 15
- Pages
- e1706435-e1706435
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2790983071
- Cited by
- 173
- References
- 4
- FWCI
- 9.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.