The DOI matches its Crossref record; 272 of the 272 references it cites were found in a registry or an index.
Causes and Solutions of Recombination in Perovskite Solar Cells
Abstract
Organic–inorganic hybrid perovskite materials are receiving increasing attention and becoming star materials on account of their unique and intriguing optical and electrical properties, such as high molar extinction coefficient, wide absorption spectrum, low excitonic binding energy, ambipolar carrier transport property, long carrier diffusion length, and high defects tolerance. Although a high power conversion efficiency (PCE) of up to 22.7% is certified for perovskite solar cells (PSCs), it is still far from the theoretical Shockley–Queisser limit efficiency (30.5%). Obviously, trap‐assisted nonradiative (also called Shockley–Read–Hall, SRH) recombination in perovskite films and interface recombination should be mainly responsible for the above efficiency distance. Here, recent research advancements in suppressing bulk SRH recombination and interface recombination are systematically investigated. For reducing SRH recombination in the films, engineering perovskite composition, additives, dimensionality, grain orientation, nonstoichiometric approach, precursor solution, and post‐treatment are explored. The focus herein is on the recombination at perovskite/electron‐transporting material and perovskite/hole‐transporting material interfaces in normal or inverted PSCs. Strategies for suppressing bulk and interface recombination are described. Additionally, the effect of trap‐assisted nonradiative recombination on hysteresis and stability of PSCs is discussed. Finally, possible solutions and reasonable prospects for suppressing recombination losses are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–272 of 272
Straus, D. B., Hurtado Parra, S., Iotov, N., Gebhardt, J., Rappe, A. M., Subotnik, J. E., Kikkawa, J. M., & Kagan, C. R. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08175 · Cited by 261
Sarritzu, V., Sestu, N., Marongiu, D., Chang, X., Masi, S., Rizzo, A., Colella, S., Quochi, F., Saba, M., Mura, A., et al. (2017) · Scientific Reports · doi:10.1038/srep44629 · Cited by 261
Shen, H., Duong, T., Peng, J., Jacobs, D., Wu, N., Gong, J., Wu, Y., Karuturi, S. K., Fu, X., Weber, K., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02627g · Cited by 257
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Self-citationReduced Interface‐Mediated Recombination for High Open‐Circuit Voltages in CH3NH3PbI3 Solar Cells
Wolff, C. M., Zu, F., Paulke, A., Toro, L. P., Koch, N., & Neher, D. (2017) · Advanced Materials · doi:10.1002/adma.201700159 · Cited by 253
Yu, Y., Wang, C., Grice, C. R., Shrestha, N., Zhao, D., Liao, W., Guan, L., Awni, R. A., Meng, W., Cimaroli, A. J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00278 · Cited by 245
Geng, W., Zhang, L., Zhang, Y.-N., Lau, W.-M., & Liu, L.-M. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp504951h · Cited by 244
The merit of perovskite's dimensionality; can this replace the 3D halide perovskite?
Etgar, L. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03397d · Cited by 244
Identification of Trap States in Perovskite Solar Cells
Baumann, A., Väth, S., Rieder, P., Heiber, M. C., Tvingstedt, K., & Dyakonov, V. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00953 · Cited by 238
Chemical Modification of Semiconductor Surfaces for Molecular Electronics
Vilan, A., & Cahen, D. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00746 · Cited by 238
Are Mobilities in Hybrid Organic–Inorganic Halide Perovskites Actually “High”?
Brenner, T. M., Egger, D. A., Rappe, A. M., Kronik, L., Hodes, G., & Cahen, D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02390 · Cited by 237
Zhao, X., Tao, L., Li, H., Huang, W., Sun, P., Liu, J., Liu, S., Sun, Q., Cui, Z., Sun, L., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00025 · Cited by 235
High Efficiency Pb–In Binary Metal Perovskite Solar Cells
Wang, Z., Li, M., Yang, Y., Hu, Y., Ma, H., Gao, X., & Liao, L. (2016) · Advanced Materials · doi:10.1002/adma.201600626 · Cited by 233
Xie, L.-Q., Chen, L., Nan, Z.-A., Lin, H.-X., Wang, T., Zhan, D.-P., Yan, J.-W., Mao, B.-W., & Tian, Z.-Q. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12432 · Cited by 232
Huang, Z., Hu, X., Liu, C., Tan, L., & Chen, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703061 · Cited by 232
Pham, N. D., Tiong, V. T., Yao, D., Martens, W., Guerrero, A., Bisquert, J., & Wang, H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.10.006 · Cited by 229
Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics
Koh, T. M., Shanmugam, V., Guo, X., Lim, S. S., Filonik, O., Herzig, E. M., Müller-Buschbaum, P., Swamy, V., Chien, S. T., Mhaisalkar, S. G., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09657g · Cited by 226
Interfacial Electron Transfer Barrier at Compact TiO2/CH3NH3PbI3Heterojunction
Xing, G., Wu, B., Chen, S., Chua, J., Yantara, N., Mhaisalkar, S., Mathews, N., & Sum, T. C. (2015) · Small · doi:10.1002/smll.201403719 · Cited by 221
Phonon–Electron Scattering Limits Free Charge Mobility in Methylammonium Lead Iodide Perovskites
Karakus, M., Jensen, S. A., D’Angelo, F., Turchinovich, D., Bonn, M., & Cánovas, E. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02485 · Cited by 220
Li, W., Dong, H., Guo, X., Li, N., Li, J., Niu, G., & Wang, L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta05196c · Cited by 216
Chen, W., Xu, L., Feng, X., Jie, J., & He, Z. (2017) · Advanced Materials · doi:10.1002/adma.201603923 · Cited by 215
Zhang, T., Chen, H., Bai, Y., Xiao, S., Zhu, L., Hu, C., Xue, Q., & Yang, S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.052 · Cited by 209
Thermodynamically Self‐Healing 1D–3D Hybrid Perovskite Solar Cells
Fan, J., Ma, Y., Zhang, C., Liu, C., Li, W., Schropp, R. E. I., & Mai, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703421 · Cited by 208
Boopathi, K. M., Mohan, R., Huang, T.-Y., Budiawan, W., Lin, M.-Y., Lee, C.-H., Ho, K.-C., & Chu, C.-W. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10288j · Cited by 207
Yang, Z., Chueh, C.-C., Liang, P.-W., Crump, M., Lin, F., Zhu, Z., & Jen, A. K.-Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.033 · Cited by 201
Dar, M. I., Arora, N., Gao, P., Ahmad, S., Grätzel, M., & Nazeeruddin, M. K. (2014) · Nano Letters · doi:10.1021/nl503279x · Cited by 193
Wang, F., Shimazaki, A., Yang, F., Kanahashi, K., Matsuki, K., Miyauchi, Y., Takenobu, T., Wakamiya, A., Murata, Y., & Matsuda, K. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12137 · Cited by 192
Zhao, L., Luo, D., Wu, J., Hu, Q., Zhang, W., Chen, K., Liu, T., Liu, Y., Zhang, Y., Liu, F., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601175 · Cited by 191
Han, Q., Bai, Y., Liu, J., Du, K.-Z., Li, T., Ji, D., Zhou, Y., Cao, C., Shin, D., Ding, J., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02272g · Cited by 190
Wu, Z., Raga, S. R., Juarez‐Perez, E. J., Yao, X., Jiang, Y., Ono, L. K., Ning, Z., Tian, H., & Qi, Y. (2018) · Advanced Materials · doi:10.1002/adma.201703670 · Cited by 188
Chen, J., Rong, Y., Mei, A., Xiong, Y., Liu, T., Sheng, Y., Jiang, P., Hong, L., Guan, Y., Zhu, X., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502009 · Cited by 185
Self-citationInterface engineering for high-performance perovskite hybrid solar cells
Zhou, Z., Pang, S., Liu, Z., Xu, H., & Cui, G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04340a · Cited by 178
Efficacious engineering on charge extraction for realizing highly efficient perovskite solar cells
Yue, S., Liu, K., Xu, R., Li, M., Azam, M., Ren, K., Liu, J., Sun, Y., Wang, Z., Cao, D., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02685d · Cited by 177
Chen, J., Lee, D., & Park, N.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07595 · Cited by 173
Self-citationTang, Z., Uchida, S., Bessho, T., Kinoshita, T., Wang, H., Awai, F., Jono, R., Maitani, M. M., Nakazaki, J., Kubo, T., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.047 · Cited by 171
Solvent effect on the hole-conductor-free fully printable perovskite solar cells
Chen, J., Xiong, Y., Rong, Y., Mei, A., Sheng, Y., Jiang, P., Hu, Y., Li, X., & Han, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.047 · Cited by 167
Self-citationEfficient and reproducible CH3NH3PbI3−x(SCN)x perovskite based planar solar cells
Chen, Y., Li, B., Huang, W., Gao, D., & Liang, Z. (2015) · Chemical Communications · doi:10.1039/c5cc03615a · Cited by 166
The Progress of Interface Design in Perovskite‐Based Solar Cells
Fan, R., Huang, Y., Wang, L., Li, L., Zheng, G., & Zhou, H. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600460 · Cited by 164
Li, F., Yuan, J., Ling, X., Zhang, Y., Yang, Y., Cheung, S. H., Ho, C. H. Y., Gao, X., & Ma, W. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706377 · Cited by 162
Luo, D., Zhao, L., Wu, J., Hu, Q., Zhang, Y., Xu, Z., Liu, Y., Liu, T., Chen, K., Yang, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604758 · Cited by 161
Xi, J., Wu, Z., Jiao, B., Dong, H., Ran, C., Piao, C., Lei, T., Song, T., Ke, W., Yokoyama, T., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606964 · Cited by 159
Mante, P., Stoumpos, C. C., Kanatzidis, M. G., & Yartsev, A. P. (2017) · Nature Communications · doi:10.1038/ncomms14398 · Cited by 157
Zhang, Y., Fei, Z., Gao, P., Lee, Y., Fadaei‐Tirani, F., Scopelliti, R., Feng, Y., Dyson, P. J., & Nazeeruddin, M. K. (2017) · Advanced Materials · doi:10.1002/adma.201702157 · Cited by 157
Multifunctional Benzoquinone Additive for Efficient and Stable Planar Perovskite Solar Cells
Qin, C., Matsushima, T., Fujihara, T., & Adachi, C. (2016) · Advanced Materials · doi:10.1002/adma.201603808 · Cited by 156
Almora, O., Cho, K. T., Aghazada, S., Zimmermann, I., Matt, G. J., Brabec, C. J., Nazeeruddin, M. K., & García-Belmonte, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.042 · Cited by 156
Guo, Y., Ma, J., Lei, H., Yao, F., Li, B., Xiong, L., & Fang, G. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00583d · Cited by 152
Yi, C., Li, X., Luo, J., Zakeeruddin, S. M., & Grätzel, M. (2016) · Advanced Materials · doi:10.1002/adma.201506049 · Cited by 151
Dong, H., Wu, Z., Xi, J., Xu, X., Zuo, L., Lei, T., Zhao, X., Zhang, L., Hou, X., & Jen, A. K. ‐. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704836 · Cited by 147
Cai, F., Yang, L., Yu, Y., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02317k · Cited by 137
Tavakoli, M. M., Bi, D., Pan, L., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800275 · Cited by 132
Zhu, W., Bao, C., Li, F., Yu, T., Gao, H., Yi, Y., Yang, J., Fu, G., Zhou, X., & Zou, Z. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.11.024 · Cited by 129
Park, C., Ko, H., Sin, D. H., Song, K. C., & Cho, K. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703546 · Cited by 127
Pseudohalide (SCN – )-Doped MAPbI 3 Perovskites: A Few Surprises
Halder, A., Chulliyil, R., Subbiah, A. S., Khan, T., Chattoraj, S., Chowdhury, A., & Sarkar, S. K. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01327 · Cited by 125
Advancements in all-solid-state hybrid solar cells based on organometal halide perovskites
Shi, S., Li, Y., Li, X., & Wang, H. (2015) · Materials Horizons · doi:10.1039/c4mh00236a · Cited by 124
How Methylammonium Cations and Chlorine Dopants Heal Defects in Lead Iodide Perovskites
Nan, G., Zhang, X., Abdi‐Jalebi, M., Andaji‐Garmaroudi, Z., Stranks, S. D., Lü, G., & Beljonne, D. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702754 · Cited by 117
Rong, Y., Venkatesan, S., Guo, R., Wang, Y., Bao, J., Li, W., Fan, Z., & Yao, Y. L. (2016) · Nanoscale · doi:10.1039/c6nr00488a · Cited by 115
Jiang, J., Jin, Z., Lei, J., Wang, Q., Zhang, X., Zhang, J., Gao, F., & Liu, S. F. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01636k · Cited by 114
Efficient Perovskite Solar Cells Fabricated by Co Partially Substituted Hybrid Perovskite
Xu, W., Zheng, L., Zhang, X., Cao, Y., Meng, T., Wu, D., Liu, L., Hu, W., & Gong, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703178 · Cited by 112
Wen, T. Y., Yang, S., Liu, P. F., Tang, L. J., Qiao, H. W., Chen, X., Yang, H. G., Hou, Y., & Yang, H. G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703143 · Cited by 111
Yao, K., Wang, X., Xu, Y., & Li, F. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.10.010 · Cited by 105
Starr, D. E., Sadoughi, G., Handick, E., Wilks, R. G., Alsmeier, J. H., Köhler, L., Gorgoi, M., Snaith, H. J., & Bär, M. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00403a · Cited by 105
High Speed Epitaxial Perovskite Memory on Flexible Substrates
Bakaul, S. R., Serrao, C. R., Lee, O., Lu, Z., Yadav, A. K., Carraro, C., Maboudian, R., Ramesh, R., & Salahuddin, S. (2017) · Advanced Materials · doi:10.1002/adma.201605699 · Cited by 99
Impacts of Ion Segregation on Local Optical Properties in Mixed Halide Perovskite Films
Hentz, O. D., Zhao, Z., & Gradečak, S. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b05181 · Cited by 90
Carbon Nanoparticles in High‐Performance Perovskite Solar Cells
Yavari, M., Mazloum‐Ardakani, M., Gholipour, S., Marinova, N., de la Cruz, J. L. D., Turren‐Cruz, S., Domanski, K., Taghavinia, N., Saliba, M., Grätzel, M., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702719 · Cited by 90
Decreasing Charge Losses in Perovskite Solar Cells Through mp-TiO2/MAPI Interface Engineering
Marín‐Beloqui, J. M., Lanzetta, L., & Palomares, E. J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03902 · Cited by 84
Nonlinear Carrier Interactions in Lead Halide Perovskites and the Role of Defects
Kandada, A. R. S., Neutzner, S., D’Innocenzo, V., Tassone, F., Gandini, M., Akkerman, Q. A., Prato, M., Manna, L., Petrozza, A., & Lanzani, G. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06463 · Cited by 83
Forgács, D., Sessolo, M., & Bolink, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03169a · Cited by 82
Yadav, P., Alotaibi, M. H., Arora, N., Dar, M. I., Zakeeruddin, S. M., & Grätzel, M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201706073 · Cited by 71
Rosenberg, J. W., Legodi, M. J., Rakita, Y., Cahen, D., & Diale, M. M. (2017) · Journal of Applied Physics · doi:10.1063/1.4995970 · Cited by 63
Брус, В. В., Kyaw, A. K. K., Maryanchuk, P. D., & Zhang, J. (2015) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2586 · Cited by 49
Zardetto, V., Giacomo, F. D., Lifka, H., Verheijen, M. A., Weijtens, C. H. L., Black, L. E., Veenstra, S. C., Kessels, W. M. M., Andriessen, R., & Creatore, M. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701456 · Cited by 37
Jiang, Y., Li, J., Xiong, S., Jiang, F., Liu, T., Qin, F., Hu, L., & Zhou, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04851c · Cited by 29
Cited by
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Self-citationImperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Minimizing non-radiative recombination losses in perovskite solar cells
Luo, D., Su, R., Zhang, W., Gong, Q., & Zhu, R. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0151-y · Cited by 1,273
Scalable fabrication and coating methods for perovskite solar cells and solar modules
Park, N.-G., & Zhu, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0176-2 · Cited by 908
Self-citationSingle-Crystal MAPbI3 Perovskite Solar Cells Exceeding 21% Power Conversion Efficiency
Chen, Z., Turedi, B., Alsalloum, A. Y., Yang, C., Zheng, X., Gereige, I., AlSaggaf, A., Mohammed, O. F., & Bakr, O. M. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00847 · Cited by 575
Metadata
- Authors
- Chen, J., & Park, N.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-09-17
- Volume
- 31
- Issue
- 47
- Pages
- e1803019-e1803019
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2891740555
- Cited by
- 733
- References
- 272
- FWCI
- 21.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.