The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
A Hierarchical Silver‐Nanowire–Graphene Host Enabling Ultrahigh Rates and Superior Long‐Term Cycling of Lithium‐Metal Composite Anodes
Abstract
Metallic lithium (Li) is a promising anode for next‐generation high‐energy‐density batteries, but its applications are still hampered due to the limited charging/discharging rate and poor cycling performance. Here, a hierarchical 3D porous architecture is designed with a binary network of continuous silver nanowires assembled on an interconnected 3D graphene skeleton as the host for Li‐metal composite anodes, which offers a significant boost in both charging/discharging rates and long‐term cycling performance for Li‐metal batteries. This unique hierarchical binary network structure in conjunction with optimized material combination provides ultrafast, continuous, and smooth electron transportation channel and non‐nucleation barrier sites to direct and confine Li deposition. It also offers outstanding mechanical strength and toughness to support massive Li deposition and buffer the internal stress fluctuations during long‐term repeated Li stripping/plating thereby minimizing fundamental issues of dendrite formation and volume change even under ultrafast charging/discharging rates. As a result, the composite anode using this hierarchical host can work smoothly at an unprecedented high current density of 40 mA cm‐2 over 1000 plating/stripping cycles with low overpotential (<120 mV) in symmetric cells. The as‐constructed full cell, paired with LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode, also exhibits excellent rate capability and high‐rate cycling stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
The path towards sustainable energy
Chu, S., Cui, Y., & Liu, N. (2017) · Nature Materials · doi:10.1038/nmat4834 · Cited by 4,791
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Liang, J., Huang, Y., Zhang, L., Wang, Y., Ma, Y., Guo, T., & Chen, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801776 · Cited by 1,605
Self-citationZhang, P., Li, J., Lv, L., Zhao, Y., & Qu, L. (2017) · ACS Nano · doi:10.1021/acsnano.7b01965 · Cited by 1,081
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Elastomeric polymer light-emitting devices and displays
Liang, J., Li, L., Niu, X., Yu, Z., & Pei, Q. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.242 · Cited by 973
Self-citationLithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Self-citationCoralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries
Zhang, R., Chen, X., Shen, X., Zhang, X.-Q., Chen, X.-R., Cheng, X.-B., Yan, C., Zhao, C.-Z., & Zhang, Q. (2018) · Joule · doi:10.1016/j.joule.2018.02.001 · Cited by 728
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance
Lu, L.-L., Ge, J., Yang, J.-N., Chen, S.-M., Yao, H.-B., Zhou, F., & Yu, S.-H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01581 · Cited by 678
Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702714 · Cited by 661
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Liang, Z., Zheng, G., Liu, C., Liu, N., Li, W., Yan, K., Yao, H., Hsu, P.-C., Chu, S., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5046318 · Cited by 540
Developing High‐Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress
Li, S., Jiang, M., Xie, Y., Xu, H., Jia, J., & Li, J. (2018) · Advanced Materials · doi:10.1002/adma.201706375 · Cited by 535
Krause, L. J., Lamanna, W. M., Summerfield, J. H., Engle, M., Korba, G. A., Loch, R., & Atanasoski, R. T. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02517-2 · Cited by 404
Synthesis and Purification of Silver Nanowires To Make Conducting Films with a Transmittance of 99%
Li, B., Ye, S., Stewart, I. E., Alvarez, S., & Wiley, B. J. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02582 · Cited by 384
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Zou, P., Wang, Y., Chiang, S.-W., Wang, X., Kang, F., & Yang, C. (2018) · Nature Communications · doi:10.1038/s41467-018-02888-8 · Cited by 319
Stitching h-BN by atomic layer deposition of LiF as a stable interface for lithium metal anode
Xie, J., Liao, L., Gong, Y., Li, Y., Shi, F., Pei, A., Sun, J., Zhang, R., Kong, B., Subbaraman, R., et al. (2017) · Science Advances · doi:10.1126/sciadv.aao3170 · Cited by 308
Lin, D., Zhao, J., Sun, J., Yao, H., Liu, Y., Yan, K., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1619489114 · Cited by 299
3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode
Liu, S., Xia, X., Zhong, Y., Deng, S., Yao, Z., Zhang, L., Cheng, X., Wang, X., Zhang, Q., & Tu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702322 · Cited by 292
Self-citationWu, S., Zhang, Z., Lan, M., Yang, S., Cheng, J., Cai, J., Shen, J., Zhu, Y., Zhang, K., & Zhang, W. (2018) · Advanced Materials · doi:10.1002/adma.201705830 · Cited by 288
Advanced Porous Carbon Materials for High‐Efficient Lithium Metal Anodes
Ye, H., Xin, S., Yin, Y., & Guo, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700530 · Cited by 261
Wang, H., Lin, D., Liu, Y., Li, Y., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1701301 · Cited by 244
Shi, X., Liu, S., Sun, Y., Liang, J., & Chen, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800850 · Cited by 236
Self-citationFan, L., Zhuang, H. L., Zhang, W., Fu, Y., Liao, Z., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703360 · Cited by 232
Three-Dimensional Printed Graphene Foams
Sha, J., Li, Y., Villegas Salvatierra, R., Wang, T., Dong, P., Ji, Y., Lee, S.-K., Zhang, C., Zhang, J., Smith, R. H., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b01987 · Cited by 214
Gao, H., Xu, L., Long, F., Pan, Z., Du, Y., Lu, Y., Ge, J., & Yu, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201400457 · Cited by 213
Fabrication of Hybrid Silicate Coatings by a Simple Vapor Deposition Method for Lithium Metal Anodes
Liu, F., Xiao, Q., Wu, H. B., Shen, L., Xu, D., Cai, M., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701744 · Cited by 206
Suppressing Dendritic Lithium Formation Using Porous Media in Lithium Metal-Based Batteries
Li, N., Wei, W., Xie, K., Tan, J., Zhang, L., Luo, X., Yuan, K., Song, Q., Li, H., Shen, C., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00183 · Cited by 186
Jin, S., Sun, Z., Guo, Y., Qi, Z., Guo, C., Kong, X., Zhu, Y., & Ji, H. (2017) · Advanced Materials · doi:10.1002/adma.201700783 · Cited by 172
Deng, W., Zhou, X., Fang, Q., & Liu, Z. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703152 · Cited by 159
Yan, P., Brown, E., Su, Q., Li, J., Wang, J., Xu, C., Zhou, C., & Lin, D. L. (2017) · Small · doi:10.1002/smll.201701756 · Cited by 105
Rollerball‐Pen‐Drawing Technology for Extremely Foldable Paper‐Based Electronics
Liu, S., Li, J., Shi, X., Gao, E., Xu, Z., Tang, H., Tong, K., Pei, Q., Liang, J., & Chen, Y. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700098 · Cited by 41
Self-citation
Cited by
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Liu, D.-H., Bai, Z., Li, M., Yu, A., Luo, D., Liu, W., Yang, L., Lu, J., Amine, K., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00636b · Cited by 483
Review on Li Deposition in Working Batteries: From Nucleation to Early Growth
Chen, X., Zhao, B., Yan, C., & Zhang, Q. (2021) · Advanced Materials · doi:10.1002/adma.202004128 · Cited by 456
Li, C., Liu, S., Shi, C., Liang, G., Lu, Z., Fu, R., & Wu, D. (2019) · Nature Communications · doi:10.1038/s41467-019-09211-z · Cited by 384
Self-citationInterface Engineering for Lithium Metal Anodes in Liquid Electrolyte
Zhai, P., Liu, L., Gu, X., Wang, T., & Gong, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001257 · Cited by 380
Metadata
- Authors
- Xue, P., Liu, S., Shi, X., Sun, C., Lai, C., Zhou, Y., Sui, D., Chen, Y., & Liang, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-09-24
- Volume
- 30
- Issue
- 44
- Pages
- e1804165-e1804165
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2894267449
- Cited by
- 257
- References
- 45
- FWCI
- 13.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.