Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 88 of the 89 references it cites were found in a registry or an index.

Surface-Mounted Metal–Organic Frameworks: Crystalline and Porous Molecular Assemblies for Fundamental Insights and Advanced Applications

Open access
Heinke, Lars, Wöll, Christof · 2019 · Advanced Materials

Abstract

Metal–organic frameworks (MOFs) are crystalline coordination polymers, assembled from inorganic nodes connected by organic linker molecules. An enormous surface area, huge compositional variety, regular structure, and favorable mechanical properties are among their outstanding properties. Monolithic MOF thin films, i.e., surface‐mounted metal–organic frameworks (SURMOFs), with high degree of structural order and adjustable defect density, can be prepared on solid substrates using layer‐by‐layer techniques. Recent studies where SURMOFs served as model systems for quantitative studies of molecular interactions in porous media, including diffusion, are reviewed. Moreover, SURMOFs are ideally suited for the incorporation of photoactive molecules as well as to study electrical transport through crystalline molecular assemblies. Recent work has demonstrated that the realization of crystalline chromophore assemblies via the SURMOF approach allows the study of fundamental aspects of exciton transport, exciton channeling, and photon upconversion at internal interfaces in organic semiconductor materials. Due to their crystalline nature, MOF materials are well suited for quantitative comparisons with theoretical results; especially, since defect densities and types can be characterized and varied in a straightforward fashion. The active role of these nanoporous films in advanced applications, like for remote‐controlled release of molecules, membranes with photoswitchable selectivity, and ion‐conductors with adjustable conductivity, are also emphasized.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/adma.201806324

Cites

88 of 88 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY-NC · From the PDF
Image 2
CC-BY-NC · From the PDF
Image 3
CC-BY-NC · From the PDF
Figure 2 SURMOF quality. a) UHV-IRRA spectra (left) and XPS data (right) of a UHM-3 SURMOF sample, in a pristine state and after successive annealing at 320, 370, 420, 470, and 520 K. Both initially and after each annealing step, the sample was cooled to 110 K before the measurements were taken. XPS data are shown for the copper 2p3/2 region. The XPS experimental curves are depicted by circles, and the deconvoluted curves according to the Cu ++ and the Cu + populations are shown with solid lines. IRRA spectra were acquired before (dashed line) and after (solid line) a 5 Langmuir CO dose. Reproduced with permission. [14] Copyright 2015, Elsevier. b) Ultrasonication for cleaning the surface of the MOF thin films during synthesis results in improved transparency that is visible to the naked eye. While the standard HKUST-1 SURMOF is turquoise as expected, high-quality HKUST-1 SURMOFs prepared with ultrasonication are almost transparent. UV-vis transmission spectra show that the high-quality SURMOF (red) has a much higher transparency than the standard SURMOF (black), especially in the visible range (inset). The transmission spectrum of the quartz glass substrate is shown by the gray line. Reproduced with permission. [9] Copyright 2015, Elsevier.
Figure 2 SURMOF quality. a) UHV-IRRA spectra (left) and XPS data (right) of a UHM-3 SURMOF sample, in a pristine state and after successive annealing at 320, 370, 420, 470, and 520 K. Both initially and after each annealing step, the sample was cooled to 110 K before the measurements were taken. XPS data are shown for the copper 2p3/2 region. The XPS experimental curves are depicted by circles, and the deconvoluted curves according to the Cu ++ and the Cu + populations are shown with solid lines. IRRA spectra were acquired before (dashed line) and after (solid line) a 5 Langmuir CO dose. Reproduced with permission. [14] Copyright 2015, Elsevier. b) Ultrasonication for cleaning the surface of the MOF thin films during synthesis results in improved transparency that is visible to the naked eye. While the standard HKUST-1 SURMOF is turquoise as expected, high-quality HKUST-1 SURMOFs prepared with ultrasonication are almost transparent. UV-vis transmission spectra show that the high-quality SURMOF (red) has a much higher transparency than the standard SURMOF (black), especially in the visible range (inset). The transmission spectrum of the quartz glass substrate is shown by the gray line. Reproduced with permission. [9] Copyright 2015, Elsevier.CC-BY-NC · From the PDF
Figure 3 a) Illustration of the mercury-droplet-based tunneling junction. The contact area between the two electrodes is shown: the mercury droplet as the top electrode is passivated with a self-assembled monolayer (SAM) of hexadecanethiol (C 16 H 33 -SH), whereas the SURMOF grown on the CMMTfunctionalized Au substrate serves as bottom electrode (CMMT: 9-carboxy-10-(mercaptomethyl) triptycene). b) Plot of the current density J versus voltage for the HKUST-1 SURMOF, prepared by five spraying cycles, before (black open squares) and after (red open circles) the loading with ferrocene. Green open triangles correspond to the CMMT SAM. Reproduced with permission. [22] Copyright 2015, American Chemical Society.
Figure 3 a) Illustration of the mercury-droplet-based tunneling junction. The contact area between the two electrodes is shown: the mercury droplet as the top electrode is passivated with a self-assembled monolayer (SAM) of hexadecanethiol (C 16 H 33 -SH), whereas the SURMOF grown on the CMMTfunctionalized Au substrate serves as bottom electrode (CMMT: 9-carboxy-10-(mercaptomethyl) triptycene). b) Plot of the current density J versus voltage for the HKUST-1 SURMOF, prepared by five spraying cycles, before (black open squares) and after (red open circles) the loading with ferrocene. Green open triangles correspond to the CMMT SAM. Reproduced with permission. [22] Copyright 2015, American Chemical Society.CC-BY-NC · From the PDF
Image 6
CC-BY-NC · From the PDF
Image 7
CC-BY-NC · From the PDF
Figure 6 Remote-controlled release and continuously tunable membrane separation by photoswitchable azobenzene-SURMOFs. a) Two-part photoswitchable SURMOF where the Cu2(BPDC)2(BiPy) bottom layer (yellow) acts as a container for storing molecules and the photoswitchable Cu2(AzoBPDC)2(BiPy) top layer (red) acts as a valve. Reversible switching occurs from trans -tocis by UV light ( ν 1 ) and from cis -totrans by visible light ( ν 2 ). The sketched pore windows are in the [001] direction. b) Optically triggered release from a molecular container. The two-part SURMOF was loaded with guest molecules (butanediol) and the top layer was closed by irradiation with UV light ν 1 . Although there were no guest molecules in the vapor phase above the sample, QCM showed only a minor leakage rate until the top layer was switched to trans , i.e., it was opened by irradiation with visible light ν 2 . c) Illustration of a photoswitchable MOF membrane with remote-controllable, continuously tunable molecular selectivity, used to separate a molecular feed mixture (blue and red molecules). d) Separation of H 2 :CO 2 mixture where the membrane was irradiated with 365 nm ( cis ) and 455 nm ( trans ) light for 5 min each. The permeances of CO 2 and H2 are shown as black open squares and solid squares, respectively, and the molecular selectivities (or separation factors) are shown as red spheres. e) The H 2 :CO2 selectivities versus the ratio of cis azobenzene, showing continuous tuning of the selectivity. The cis -azobenzene ratio is adjusted by brief illumination times or by simultaneous irradiation with blue and UV light. Reproduced with permissions. [50,53] Copyright 2014 and 2016, American Chemical Society and Nature Publishing Group.
Figure 6 Remote-controlled release and continuously tunable membrane separation by photoswitchable azobenzene-SURMOFs. a) Two-part photoswitchable SURMOF where the Cu2(BPDC)2(BiPy) bottom layer (yellow) acts as a container for storing molecules and the photoswitchable Cu2(AzoBPDC)2(BiPy) top layer (red) acts as a valve. Reversible switching occurs from trans -tocis by UV light ( ν 1 ) and from cis -totrans by visible light ( ν 2 ). The sketched pore windows are in the [001] direction. b) Optically triggered release from a molecular container. The two-part SURMOF was loaded with guest molecules (butanediol) and the top layer was closed by irradiation with UV light ν 1 . Although there were no guest molecules in the vapor phase above the sample, QCM showed only a minor leakage rate until the top layer was switched to trans , i.e., it was opened by irradiation with visible light ν 2 . c) Illustration of a photoswitchable MOF membrane with remote-controllable, continuously tunable molecular selectivity, used to separate a molecular feed mixture (blue and red molecules). d) Separation of H 2 :CO 2 mixture where the membrane was irradiated with 365 nm ( cis ) and 455 nm ( trans ) light for 5 min each. The permeances of CO 2 and H2 are shown as black open squares and solid squares, respectively, and the molecular selectivities (or separation factors) are shown as red spheres. e) The H 2 :CO2 selectivities versus the ratio of cis azobenzene, showing continuous tuning of the selectivity. The cis -azobenzene ratio is adjusted by brief illumination times or by simultaneous irradiation with blue and UV light. Reproduced with permissions. [50,53] Copyright 2014 and 2016, American Chemical Society and Nature Publishing Group.CC-BY-NC · From the PDF
Figure 7 Photoswitchable proton conduction. a) Sketch of the photoswitchable SURMOF film (green) on the interdigitated gold electrodes (yellow) on quartz (light blue) substrate. The Cu 2 (F2 AzoBDC)2(dabco) MOF structure with a view along the [001] direction is shown. The fluorinated azobenzene side groups can be switched with green light (530 nm) from trans to cis and with violet (400 nm) from cis to trans . The black lines sketch the connection to the electric circuit and the impedance spectrometer. b) Photoswitchable proton conduction of butanediol in Cu 2 (F 2 AzoBDC) 2 (dabco) SURMOF with the Nyquist plot of the impedance Z . The black data are measured in the pristine sample ( trans ), green after irradiation with green light ( cis ) and violet after irradiation with violet light ( trans ). c) The AC current at a voltage of 1 V and 1 Hz. The current is decreased and increased by irradiation with green and violet light, respectively. Reproduced with permissions. [56] Copyright 2018, Wiley-VCH.
Figure 7 Photoswitchable proton conduction. a) Sketch of the photoswitchable SURMOF film (green) on the interdigitated gold electrodes (yellow) on quartz (light blue) substrate. The Cu 2 (F2 AzoBDC)2(dabco) MOF structure with a view along the [001] direction is shown. The fluorinated azobenzene side groups can be switched with green light (530 nm) from trans to cis and with violet (400 nm) from cis to trans . The black lines sketch the connection to the electric circuit and the impedance spectrometer. b) Photoswitchable proton conduction of butanediol in Cu 2 (F 2 AzoBDC) 2 (dabco) SURMOF with the Nyquist plot of the impedance Z . The black data are measured in the pristine sample ( trans ), green after irradiation with green light ( cis ) and violet after irradiation with violet light ( trans ). c) The AC current at a voltage of 1 V and 1 Hz. The current is decreased and increased by irradiation with green and violet light, respectively. Reproduced with permissions. [56] Copyright 2018, Wiley-VCH.CC-BY-NC · From the PDF
Figure 8 Thermal cis -totrans isomerization of isolated azobenzene moieties in SURMOFs. a) AzoBiPyB linker molecules are incorporated in Cu2(DMTPDC)2(AzoBiPyB) SURMOF, resulting in essentially isolated azobenzene pendant groups. The Cu atoms are plotted orange, O red, C gray, N blue, and H is not shown. b) IR vibrational spectra of the SURMOF before ( trans , black), after UV light irradiation ( trans and cis , blue) and after thermal relaxation to the trans form (red). The black and red spectra are virtually identical. c) Arrhenius plot of the thermal cis -totrans rates ascertained from the variations of the IR bands. Reproduced with permission. [63] Copyright 2015, Royal Chemical Society.
Figure 8 Thermal cis -totrans isomerization of isolated azobenzene moieties in SURMOFs. a) AzoBiPyB linker molecules are incorporated in Cu2(DMTPDC)2(AzoBiPyB) SURMOF, resulting in essentially isolated azobenzene pendant groups. The Cu atoms are plotted orange, O red, C gray, N blue, and H is not shown. b) IR vibrational spectra of the SURMOF before ( trans , black), after UV light irradiation ( trans and cis , blue) and after thermal relaxation to the trans form (red). The black and red spectra are virtually identical. c) Arrhenius plot of the thermal cis -totrans rates ascertained from the variations of the IR bands. Reproduced with permission. [63] Copyright 2015, Royal Chemical Society.CC-BY-NC · From the PDF
Figure 9 a) Schematic diagram of triplet-triplet annihilation upconversion (TTA-UC). Two 532 nm photons absorbed by the sensitizer SURMOF (B) create triplet states. Upon reaching the interface, there is transfer to the emitter SURMOF (A) by a Dexter two-electron-exchange mechanism. Two triplets meeting in the emitter layer can annihilate, causing the emission of a single higher-energy photon. b) The absorption spectrum of the sensitizer (B) layer (red), the wavelength of the 532 nm excitation laser (green) and the observed upconverted emission (blue). The upconverted emission provides direct optical evidence that the SURMOF-SURMOF heterojunction is of sufficient quality to allow triplet transfer, and therefore electron transfer, between the SURMOF layers. Reproduced with permission. [6] Copyright 2016, Wiley-VCH.
Figure 9 a) Schematic diagram of triplet-triplet annihilation upconversion (TTA-UC). Two 532 nm photons absorbed by the sensitizer SURMOF (B) create triplet states. Upon reaching the interface, there is transfer to the emitter SURMOF (A) by a Dexter two-electron-exchange mechanism. Two triplets meeting in the emitter layer can annihilate, causing the emission of a single higher-energy photon. b) The absorption spectrum of the sensitizer (B) layer (red), the wavelength of the 532 nm excitation laser (green) and the observed upconverted emission (blue). The upconverted emission provides direct optical evidence that the SURMOF-SURMOF heterojunction is of sufficient quality to allow triplet transfer, and therefore electron transfer, between the SURMOF layers. Reproduced with permission. [6] Copyright 2016, Wiley-VCH.CC-BY-NC · From the PDF
Image 12
CC-BY-NC · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 89 references

Research works printed but not linked: 3

  1. Ninclaus C., 1998, C. R. Acad. Sci., Ser. IIc: Chim., 1, 551
  2. Zybaylo O., 2013, Phys. Chem. Chem. Phys., 15, 21099
  3. Kanj A. B., 2017, Macromol. Rapid Commun., 38, 1700239

Cited by

See all 195

Metadata

Authors
Heinke, L., & Wöll, C.
Affiliations
Karlsruhe Institute of Technology (DE)
Corresponding author
  • Heinke, Lars
  • Wöll, Christof
Venue
Advanced Materials
Publisher
Wiley
Published
2019-01-30
Volume
31
Issue
26
Pages
e1806324-e1806324
ISSN
  • 0935-9648 (ISSN-L)
  • 1521-4095
OpenAlex
W2913295980
Cited by
192
References
89
Citations by year
2026: 12 · 2025: 15 · 2024: 19 · 2023: 29 · 2022: 34 · 2021: 33 · 2020: 32 · 2019: 18
FWCI
1.48
Type
journal article
Language
en
Open access
Locations
  • Advanced Materials (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
Funders
Deutsche Forschungsgemeinschaft (HE 7036/5, SFB 1176)
Topics
  • Physical Sciences › Chemistry › Inorganic Chemistry › Metal-Organic Frameworks: Synthesis and Applications
  • Physical Sciences › Materials Science › Materials Chemistry › Covalent Organic Framework Applications
  • Physical Sciences › Chemistry › Organic Chemistry › Supramolecular Chemistry and Complexes
Keywords
SURMOF, layer-by-layer assembly, photoactive molecules, exciton transport, photon upconversion, defect density, organic semiconductors, ionic conductors

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Surface-Mounted Metal–Organic Frameworks: Crystalline and Porous Molecular Assemblies for Fundamental Insights and Advanced Applications. https://app.cochat.ai/papers/10.1002/adma.201806324
The paper
Heinke, L., & Wöll, C. (2019). Surface-Mounted Metal–Organic Frameworks: Crystalline and Porous Molecular Assemblies for Fundamental Insights and Advanced Applications. Advanced Materials. https://doi.org/10.1002/adma.201806324

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.