Surface-Mounted Metal–Organic Frameworks: Crystalline and Porous Molecular Assemblies for Fundamental Insights and Advanced Applications
Open accessThe DOI matches its Crossref record; 88 of the 89 references it cites were found in a registry or an index.
Abstract
Metal–organic frameworks (MOFs) are crystalline coordination polymers, assembled from inorganic nodes connected by organic linker molecules. An enormous surface area, huge compositional variety, regular structure, and favorable mechanical properties are among their outstanding properties. Monolithic MOF thin films, i.e., surface‐mounted metal–organic frameworks (SURMOFs), with high degree of structural order and adjustable defect density, can be prepared on solid substrates using layer‐by‐layer techniques. Recent studies where SURMOFs served as model systems for quantitative studies of molecular interactions in porous media, including diffusion, are reviewed. Moreover, SURMOFs are ideally suited for the incorporation of photoactive molecules as well as to study electrical transport through crystalline molecular assemblies. Recent work has demonstrated that the realization of crystalline chromophore assemblies via the SURMOF approach allows the study of fundamental aspects of exciton transport, exciton channeling, and photon upconversion at internal interfaces in organic semiconductor materials. Due to their crystalline nature, MOF materials are well suited for quantitative comparisons with theoretical results; especially, since defect densities and types can be characterized and varied in a straightforward fashion. The active role of these nanoporous films in advanced applications, like for remote‐controlled release of molecules, membranes with photoswitchable selectivity, and ion‐conductors with adjustable conductivity, are also emphasized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures



![Figure 2 SURMOF quality. a) UHV-IRRA spectra (left) and XPS data (right) of a UHM-3 SURMOF sample, in a pristine state and after successive annealing at 320, 370, 420, 470, and 520 K. Both initially and after each annealing step, the sample was cooled to 110 K before the measurements were taken. XPS data are shown for the copper 2p3/2 region. The XPS experimental curves are depicted by circles, and the deconvoluted curves according to the Cu ++ and the Cu + populations are shown with solid lines. IRRA spectra were acquired before (dashed line) and after (solid line) a 5 Langmuir CO dose. Reproduced with permission. [14] Copyright 2015, Elsevier. b) Ultrasonication for cleaning the surface of the MOF thin films during synthesis results in improved transparency that is visible to the naked eye. While the standard HKUST-1 SURMOF is turquoise as expected, high-quality HKUST-1 SURMOFs prepared with ultrasonication are almost transparent. UV-vis transmission spectra show that the high-quality SURMOF (red) has a much higher transparency than the standard SURMOF (black), especially in the visible range (inset). The transmission spectrum of the quartz glass substrate is shown by the gray line. Reproduced with permission. [9] Copyright 2015, Elsevier.](https://figures.cochat.ai/paper-figures/2b6e254c0cbd4d7b92f301fc07ab9d6d/surface-mounted-metalorganic-frameworks-crystalline-and-porous-molecular-figure-2.png)
![Figure 3 a) Illustration of the mercury-droplet-based tunneling junction. The contact area between the two electrodes is shown: the mercury droplet as the top electrode is passivated with a self-assembled monolayer (SAM) of hexadecanethiol (C 16 H 33 -SH), whereas the SURMOF grown on the CMMTfunctionalized Au substrate serves as bottom electrode (CMMT: 9-carboxy-10-(mercaptomethyl) triptycene). b) Plot of the current density J versus voltage for the HKUST-1 SURMOF, prepared by five spraying cycles, before (black open squares) and after (red open circles) the loading with ferrocene. Green open triangles correspond to the CMMT SAM. Reproduced with permission. [22] Copyright 2015, American Chemical Society.](https://figures.cochat.ai/paper-figures/8a2b362eee5a4bfeaa64e5f979695e9d/surface-mounted-metalorganic-frameworks-crystalline-and-porous-molecular-figure-3.png)


![Figure 6 Remote-controlled release and continuously tunable membrane separation by photoswitchable azobenzene-SURMOFs. a) Two-part photoswitchable SURMOF where the Cu2(BPDC)2(BiPy) bottom layer (yellow) acts as a container for storing molecules and the photoswitchable Cu2(AzoBPDC)2(BiPy) top layer (red) acts as a valve. Reversible switching occurs from trans -tocis by UV light ( ν 1 ) and from cis -totrans by visible light ( ν 2 ). The sketched pore windows are in the [001] direction. b) Optically triggered release from a molecular container. The two-part SURMOF was loaded with guest molecules (butanediol) and the top layer was closed by irradiation with UV light ν 1 . Although there were no guest molecules in the vapor phase above the sample, QCM showed only a minor leakage rate until the top layer was switched to trans , i.e., it was opened by irradiation with visible light ν 2 . c) Illustration of a photoswitchable MOF membrane with remote-controllable, continuously tunable molecular selectivity, used to separate a molecular feed mixture (blue and red molecules). d) Separation of H 2 :CO 2 mixture where the membrane was irradiated with 365 nm ( cis ) and 455 nm ( trans ) light for 5 min each. The permeances of CO 2 and H2 are shown as black open squares and solid squares, respectively, and the molecular selectivities (or separation factors) are shown as red spheres. e) The H 2 :CO2 selectivities versus the ratio of cis azobenzene, showing continuous tuning of the selectivity. The cis -azobenzene ratio is adjusted by brief illumination times or by simultaneous irradiation with blue and UV light. Reproduced with permissions. [50,53] Copyright 2014 and 2016, American Chemical Society and Nature Publishing Group.](https://figures.cochat.ai/paper-figures/3905bf67c699430788cc89f36c1e2850/surface-mounted-metalorganic-frameworks-crystalline-and-porous-molecular-figure-6.png)
![Figure 7 Photoswitchable proton conduction. a) Sketch of the photoswitchable SURMOF film (green) on the interdigitated gold electrodes (yellow) on quartz (light blue) substrate. The Cu 2 (F2 AzoBDC)2(dabco) MOF structure with a view along the [001] direction is shown. The fluorinated azobenzene side groups can be switched with green light (530 nm) from trans to cis and with violet (400 nm) from cis to trans . The black lines sketch the connection to the electric circuit and the impedance spectrometer. b) Photoswitchable proton conduction of butanediol in Cu 2 (F 2 AzoBDC) 2 (dabco) SURMOF with the Nyquist plot of the impedance Z . The black data are measured in the pristine sample ( trans ), green after irradiation with green light ( cis ) and violet after irradiation with violet light ( trans ). c) The AC current at a voltage of 1 V and 1 Hz. The current is decreased and increased by irradiation with green and violet light, respectively. Reproduced with permissions. [56] Copyright 2018, Wiley-VCH.](https://figures.cochat.ai/paper-figures/29337982e58a438ca228317585f06e8a/surface-mounted-metalorganic-frameworks-crystalline-and-porous-molecular-figure-7.png)
![Figure 8 Thermal cis -totrans isomerization of isolated azobenzene moieties in SURMOFs. a) AzoBiPyB linker molecules are incorporated in Cu2(DMTPDC)2(AzoBiPyB) SURMOF, resulting in essentially isolated azobenzene pendant groups. The Cu atoms are plotted orange, O red, C gray, N blue, and H is not shown. b) IR vibrational spectra of the SURMOF before ( trans , black), after UV light irradiation ( trans and cis , blue) and after thermal relaxation to the trans form (red). The black and red spectra are virtually identical. c) Arrhenius plot of the thermal cis -totrans rates ascertained from the variations of the IR bands. Reproduced with permission. [63] Copyright 2015, Royal Chemical Society.](https://figures.cochat.ai/paper-figures/69aff15881cb45e2ac0be11fab2a0f18/surface-mounted-metalorganic-frameworks-crystalline-and-porous-molecular-figure-8.png)
![Figure 9 a) Schematic diagram of triplet-triplet annihilation upconversion (TTA-UC). Two 532 nm photons absorbed by the sensitizer SURMOF (B) create triplet states. Upon reaching the interface, there is transfer to the emitter SURMOF (A) by a Dexter two-electron-exchange mechanism. Two triplets meeting in the emitter layer can annihilate, causing the emission of a single higher-energy photon. b) The absorption spectrum of the sensitizer (B) layer (red), the wavelength of the 532 nm excitation laser (green) and the observed upconverted emission (blue). The upconverted emission provides direct optical evidence that the SURMOF-SURMOF heterojunction is of sufficient quality to allow triplet transfer, and therefore electron transfer, between the SURMOF layers. Reproduced with permission. [6] Copyright 2016, Wiley-VCH.](https://figures.cochat.ai/paper-figures/59c7d5cebf694318a95b87530c39f847/surface-mounted-metalorganic-frameworks-crystalline-and-porous-molecular-figure-9.png)

Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“MOFs are highly porous with huge specific surfaces [35].”
From Sniff Species: SURMOF-Based Sensor Array Discriminates Aromatic Plants beyond the Genus Level (2021) · cites this paper as [35]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Chemistry and Applications of Metal-Organic Frameworks
Furukawa, H., Cordova, K. E., O’Keeffe, M., & Yaghi, O. M. (2013) · Science · doi:10.1126/science.1230444 · Cited by 16,945
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Synthetic Molecular Motors and Mechanical Machines
Kay, E. R., Leigh, D. A., & Zerbetto, F. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200504313 · Cited by 2,609
J‐Aggregates: From Serendipitous Discovery to Supramolecular Engineering of Functional Dye Materials
Würthner, F., Kaiser, T. E., & Saha‐Möller, C. R. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201002307 · Cited by 2,592
Photoinduced Motions in Azo-Containing Polymers
Natansohn, A., & Rochon, P. (2002) · Chemical Reviews · doi:10.1021/cr970155y · Cited by 2,229
Making molecular machines work
Browne, W. R., & Feringa, B. L. (2006) · Nature Nanotechnology · doi:10.1038/nnano.2006.45 · Cited by 1,463
Large-scale screening of hypothetical metal–organic frameworks
Wilmer, C. E., Leaf, M., Lee, C. Y., Farha, O. K., Hauser, B. G., Hupp, J. T., & Snurr, R. Q. (2012) · Nature Chemistry · doi:10.1038/nchem.1192 · Cited by 1,439
MOF-based electronic and opto-electronic devices
Stavila, V., Talin, A. A., & Allendorf, M. D. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00096j · Cited by 1,330
Tunable Electrical Conductivity in Metal-Organic Framework Thin-Film Devices
Talin, A. A., Centrone, A., Ford, A. C., Foster, M. E., Stavila, V., Haney, P., Kinney, R. A., Szalai, V., El Gabaly, F., Yoon, H. P., et al. (2014) · Science · doi:10.1126/science.1246738 · Cited by 1,233
Li, H., Eddaoudi, M., Groy, T. L., & Yaghi, O. M. (1998) · Journal of the American Chemical Society · doi:10.1021/ja981669x · Cited by 1,220
Moghadam, P. Z., Li, A., Wiggin, S. B., Tao, A., Maloney, A. G. P., Wood, P. A., Ward, S. C., & Fairen-Jimenez, D. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00441 · Cited by 1,082
Photomobile Polymer Materials: Towards Light‐Driven Plastic Motors
Yamada, M., Kondo, M., Mamiya, J., Yu, Y., Kinoshita, M., Barrett, C. J., & Ikeda, T. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200800760 · Cited by 1,047
Bléger, D., Schwarz, J., Brouwer, A. M., & Hecht, S. (2012) · Journal of the American Chemical Society · doi:10.1021/ja310323y · Cited by 902
Assembly of porphyrin building blocks into network structures with large channels
Abrahams, B. F., Hoskins, B. F., Michail, D. M., & Robson, R. (1994) · Nature · doi:10.1038/369727a0 · Cited by 786
Diffusion in Nanoporous Materials
Kärger, J., Ruthven, D. M., & Theodorou, D. N. (2012) · doi:10.1002/9783527651276 · Cited by 723
Liu, J., & Wöll, C. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00315c · Cited by 698
Self-citationMechanical twisting of a guest by a photoresponsive host
Muraoka, T., Kinbara, K., & Aida, T. (2006) · Nature · doi:10.1038/nature04635 · Cited by 691
(2011) · Wiley eBooks · doi:10.1002/9783527634408 · Cited by 679
Coordination polymers, metal–organic frameworks and the need for terminology guidelines
Batten, S. R., Champness, N. R., Chen, X.-M., Garcia-Martinez, J., Kitagawa, S., Öhrström, L., O'Keeffe, M., Suh, M. P., & Reedijk, J. (2012) · CrystEngComm · doi:10.1039/c2ce06488j · Cited by 587
Cembran, A., Bernardi, F., Garavelli, M., Gagliardi, L., & Orlandi, G. (2004) · Journal of the American Chemical Society · doi:10.1021/ja038327y · Cited by 524
Azobenzene photomechanics: prospects and potential applications
Mahimwalla, Z., Yager, K. G., Mamiya, J.-I., Shishido, A., Priimagi, A., & Barrett, C. J. (2012) · Polymer Bulletin · doi:10.1007/s00289-012-0792-0 · Cited by 419
Functional Hybrid Porous Coordination Polymers
Foo, M. L., Matsuda, R., & Kitagawa, S. (2014) · Chemistry of Materials · doi:10.1021/cm402136z · Cited by 402
Dokić, J., Gothe, M., Wirth, J., Peters, M. V., Schwarz, J., Hecht, S., & Saalfrank, P. (2009) · The Journal of Physical Chemistry A · doi:10.1021/jp9021344 · Cited by 270
Tunable molecular separation by nanoporous membranes
Wang, Z., Knebel, A., Grosjean, S., Wagner, D., Bräse, S., Wöll, C., Caro, J., & Heinke, L. (2016) · Nature Communications · doi:10.1038/ncomms13872 · Cited by 257
Self-citationHigh‐Throughput Fabrication of Uniform and Homogenous MOF Coatings
Arslan, H. K., Shekhah, O., Wohlgemuth, J., Franzreb, M., Fischer, R. A., & Wöll, C. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101592 · Cited by 251
Self-citationThe Chemistry of Metal-Organic Frameworks: Synthesis, Characterization, and Applications
(2016) · Wiley-VCH eBooks · doi:10.1002/9783527693078 · Cited by 241
Chernikova, V., Shekhah, O., & Eddaoudi, M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04701 · Cited by 234
Microimaging of transient guest profiles to monitor mass transfer in nanoporous materials
Kärger, J., Binder, T., Chmelik, C., Hibbe, F., Krautscheid, H., Krishna, R., & Weitkamp, J. (2014) · Nature Materials · doi:10.1038/nmat3917 · Cited by 226
Synthesis of Single-Molecule Nanocars
Vives, G., & Tour, J. M. (2009) · Accounts of Chemical Research · doi:10.1021/ar8002317 · Cited by 223
The surface barrier phenomenon at the loading of metal-organic frameworks
Heinke, L., Gu, Z., & Wöll, C. (2014) · Nature Communications · doi:10.1038/ncomms5562 · Cited by 196
Self-citationHeinke, L., Cakici, M., Dommaschk, M., Grosjean, S., Herges, R., Bräse, S., & Wöll, C. (2014) · ACS Nano · doi:10.1021/nn405469g · Cited by 185
Self-citationHibbe, F., Chmelik, C., Heinke, L., Pramanik, S., Li, J., Ruthven, D. M., Tzoulaki, D., & Kärger, J. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108625z · Cited by 184
Self-citationThe role of crystal diversity in understanding mass transfer in nanoporous materials
Remi, J. C. S., Lauerer, A., Chmelik, C., Vandendael, I., Terryn, H., Baron, G. V., Denayer, J. F. M., & Kärger, J. (2016) · Nature Materials · doi:10.1038/nmat4510 · Cited by 183
Effect of polymer matrix on the cis‐trans isomerization of azobenzene residues in bulk polymers
Eisenbach, C. D. (1978) · Die Makromolekulare Chemie · doi:10.1002/macp.1978.021791014 · Cited by 161
A novel method to measure diffusion coefficients in porous metal–organic frameworks
Zybaylo, O., Shekhah, O., Wang, H., Tafipolsky, M. A., Schmid, R., Johannsmann, D., & Wöll, C. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/b927601g · Cited by 160
Self-citationModrow, A., Zargarani, D., Herges, R., & Stock, N. (2012) · Dalton Transactions · doi:10.1039/c2dt30672g · Cited by 158
Conductance Photoswitching of Metal–Organic Frameworks with Embedded Spiropyran
Garg, S., Schwartz, H., Kozlowska, M., Kanj, A. B., Müller, K., Wenzel, W., Ruschewitz, U., & Heinke, L. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201811458 · Cited by 158
Self-citationPhoton Upconversion at Crystalline Organic–Organic Heterojunctions
Oldenburg, M., Turshatov, A. A., Busko, D. N., Wollgarten, S., Adams, M., Baroni, N., Welle, A., Redel, E., Wöll, C., Richards, B. S., et al. (2016) · Advanced Materials · doi:10.1002/adma.201601718 · Cited by 155
Self-citationSurface-mounted metal-organic frameworks for applications in sensing and separation
Heinke, L., Tu, M., Wannapaiboon, S., Fischer, R. A., & Wöll, C. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.03.018 · Cited by 153
Self-citationSwitching the Proton Conduction in Nanoporous, Crystalline Materials by Light
Müller, K., Helfferich, J., Zhao, F., Verma, R., Kanj, A. B., Meded, V., Bléger, D., Wenzel, W., & Heinke, L. (2018) · Advanced Materials · doi:10.1002/adma.201706551 · Cited by 153
Self-citationTransport in Nanoporous Materials Including MOFs: The Applicability of Fick’s Laws
Titze, T., Lauerer, A., Heinke, L., Chmelik, C., Zimmermann, N., Keil, F. J., Ruthven, D. M., & Kärger, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506954 · Cited by 145
Self-citationDefects in MOFs: A Thorough Characterization
Petkov, P. S., Vayssilov, G. N., Liu, J., Shekhah, O., Wang, Y., Wöll, C., & Heine, T. (2012) · ChemPhysChem · doi:10.1002/cphc.201200222 · Cited by 145
Self-citationTransparent films of metal-organic frameworks for optical applications
Gu, Z., Pfriem, A., Hamsch, S., Breitwieser, H., Wohlgemuth, J., Heinke, L., Gliemann, H., & Wöll, C. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.02.048 · Cited by 141
Self-citationSwitching Thin Films of Azobenzene‐Containing Metal–Organic Frameworks with Visible Light
Müller, K., Knebel, A., Zhao, F., Bléger, D., Caro, J., & Heinke, L. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201700989 · Cited by 116
Self-citationMetal–Organic Frameworks as Hosts for Photochromic Guest Molecules
Hermann, D., Emerich, H., Lepski, R., Schaniel, D., & Ruschewitz, U. (2013) · Inorganic Chemistry · doi:10.1021/ic302856b · Cited by 114
Saha, D., Wei, Z., & Deng, S. (2008) · Separation and Purification Technology · doi:10.1016/j.seppur.2008.10.022 · Cited by 109
Wang, Z., Heinke, L., Jelic, J., Çakıcı, M., Dommaschk, M., Maurer, R. J., Oberhofer, H., Grosjean, S., Herges, R., Bräse, S., et al. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp01372k · Cited by 102
Self-citationSprayable, Large‐Area Metal–Organic Framework Films and Membranes of Varying Thickness
Hurrle, S., Friebe, S., Wohlgemuth, J., Wöll, C., Caro, J., & Heinke, L. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201606056 · Cited by 99
Self-citationDragässer, A., Shekhah, O., Zybaylo, O., Shen, C., Buck, M., Wöll, C., & Schlettwein, D. (2011) · Chemical Communications · doi:10.1039/c1cc16580a · Cited by 97
Self-citationFirst-Principles-Derived Force Field for Copper Paddle-Wheel-Based Metal−Organic Frameworks
Tafipolsky, M. A., Amirjalayer, S., & Schmid, R. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp104441d · Cited by 96
Liu, J., Wächter, T., Irmler, A., Weidler, P. G., Gliemann, H., Pauly, F., Mugnaini, V., Zharnikov, M., & Wöll, C. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01792 · Cited by 96
Self-citationSchneider, C., Ukaj, D., Koerver, R., Talin, A. A., Kieslich, G., Pujari, S. P., Zuilhof, H. T., Janek, J., Allendorf, M. D., & Fischer, R. A. (2018) · Chemical Science · doi:10.1039/c8sc02471e · Cited by 94
Solution-Like Behavior of Photoswitchable Spiropyrans Embedded in Metal–Organic Frameworks
Schwartz, H. A., Olthof, S., Schaniel, D., Meerholz, K., & Ruschewitz, U. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.7b01908 · Cited by 92
Comparative QENS and PFG NMR diffusion studies of water in zeolite NaCaA
Paoli, H., Méthivier, A., Jobic, H., Krause, C. B., Pfeifer, H., Stallmach, F., & Kärger, J. (2002) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(02)00399-2 · Cited by 91
Correlating Surface Permeability with Intracrystalline Diffusivity in Nanoporous Solids
Heinke, L., & Kärger, J. (2011) · Physical Review Letters · doi:10.1103/physrevlett.106.074501 · Cited by 91
Self-citationYu, X., Wang, Z., Buchholz, M., Füllgrabe, N., Grosjean, S., Bebensee, F., Bräse, S., Wöll, C., & Heinke, L. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp03091a · Cited by 89
Self-citationPhotoswitchable Adsorption in Metal–Organic Frameworks Based on Polar Guest–Host Interactions
Wang, Z., Grosjean, S., Bräse, S., & Heinke, L. (2015) · ChemPhysChem · doi:10.1002/cphc.201500829 · Cited by 87
Self-citationWang, Z., Müller, K., Valášek, M., Grosjean, S., Bräse, S., Wöll, C., Mayor, M., & Heinke, L. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b05843 · Cited by 80
Self-citationGu, Z., Heinke, L., Wöll, C., Neumann, T., Wenzel, W., Li, Q., Fink, K., Gordan, O. D., & Zahn, D. R. T. (2015) · Applied Physics Letters · doi:10.1063/1.4934737 · Cited by 79
Self-citationPhotoswitchable nanoporous films by loading azobenzene in metal–organic frameworks of type HKUST-1
Müller, K., Wadhwa, J., Malhi, J. S., Schöttner, L., Welle, A., Schwartz, H. A., Hermann, D., Ruschewitz, U., & Heinke, L. (2017) · Chemical Communications · doi:10.1039/c7cc00961e · Cited by 79
Self-citationAnisotropic energy transfer in crystalline chromophore assemblies
Haldar, R., Jakoby, M., Mazel, A., Zhang, Q., Welle, A., Mohamed, T., Krolla, P., Wenzel, W., Diring, S., Odobel, F., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06829-3 · Cited by 79
Self-citationMüller, K., Fink, K., Schöttner, L., Koenig, M., Heinke, L., & Wöll, C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12045 · Cited by 77
Self-citationDissolving uptake-hindering surface defects in metal–organic frameworks
Müller, K., Vankova, N., Schöttner, L., Heine, T., & Heinke, L. (2019) · Chemical Science · doi:10.1039/c8sc03735c · Cited by 75
Self-citationSchwartz, H. A., Ruschewitz, U., & Heinke, L. (2018) · Photochemical & Photobiological Sciences · doi:10.1039/c7pp00456g · Cited by 74
Self-citationWeidner, T., Bretthauer, F., Ballav, N., Motschmann, H. R., Orendi, H., Bruhn, C., Siemeling, U., & Zharnikov, M. (2008) · Langmuir · doi:10.1021/la802454w · Cited by 73
Superexchange Charge Transport in Loaded Metal Organic Frameworks
Neumann, T., Liu, J., Wächter, T., Friederich, P., Symalla, F., Welle, A., Mugnaini, V., Meded, V., Zharnikov, M., Wöll, C., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b03226 · Cited by 71
Self-citationDelen, G., Ristanović, Z., Mandemaker, L. D. B., & Weckhuysen, B. M. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201704190 · Cited by 70
Structural and spectroscopic characterization of E- and Z-isomers of azobenzene
Duarte, L. F., Fausto, R., & Reva, I. D. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00240g · Cited by 66
Heinke, L., & Wöll, C. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp50578b · Cited by 61
Self-citationEnsemble Measurement of Diffusion: Novel Beauty and Evidence
Chmelik, C., Heinke, L., Kortunov, P. V., Li, J., OLSON, D. H. L., Tzoulaki, D., Weitkamp, J., & Kärger, J. (2009) · ChemPhysChem · doi:10.1002/cphc.200900489 · Cited by 60
Self-citationIsomerization of cis-Azobenzene in the Solid Phase
Tsuda, M., & Kuratani, K. (1964) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.37.1284 · Cited by 55
Imai, Y., Naka, K., & Chujo, Y. (1999) · Macromolecules · doi:10.1021/ma981360y · Cited by 53
Chmelik, C., Hibbe, F., Tzoulaki, D., Heinke, L., Caro, J., Li, J., & Kärger, J. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.06.006 · Cited by 49
Self-citationTzoulaki, D., Heinke, L., Castro, M., Cubillas, P., Anderson, M. W., Zhou, W., Wright, P. A., & Kärger, J. (2010) · Journal of the American Chemical Society · doi:10.1021/ja104016n · Cited by 42
Self-citationWang, Z., Sezen, H., Liu, J., Yang, C., Roggenbuck, S. E., Peikert, K., Fröba, M., Mavrandonakis, A., Supronowicz, B., Heine, T., et al. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.12.033 · Cited by 42
Self-citationFreyer, W., Brete, D., Schmidt, R., Gahl, C., Carley, R., & Weinelt, M. (2009) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2009.02.018 · Cited by 41
Diffusion and photoswitching in nanoporous thin films of metal-organic frameworks
Heinke, L. (2017) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aa65f8 · Cited by 41
Self-citationHydrogen permeation and diffusion in densified MOF-5 pellets
Xu, C., Yang, J., Veenstra, M., Sudik, A. C., Purewal, J. J., Yang, M., Hardy, B. J., Warner, J. R., Maurer, S., Müeller, U., et al. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.12.096 · Cited by 38
Excitonically Coupled States in Crystalline Coordination Networks
Haldar, R., Mazel, A., Joseph, R. E., Adams, M., Howard, I. A., Richards, B. S., Tsotsalas, M. M., Redel, E., Diring, S., Odobel, F., et al. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201702968 · Cited by 37
Self-citationMasillamani, A. M., Osella, S., Liscio, A., Fenwick, O., Reinders, F., Mayor, M., Palermo, V., Cornil, J., & Samorí, P. (2014) · Nanoscale · doi:10.1039/c4nr01880j · Cited by 35
Liquid- and Gas-Phase Diffusion of Ferrocene in Thin Films of Metal-Organic Frameworks
Zhou, W., Wöll, C., & Heinke, L. (2015) · Materials · doi:10.3390/ma8063767 · Cited by 34
Self-citationMüller, K., Malhi, J. S., Wohlgemuth, J., Fischer, R. A., Wöll, C., Gliemann, H., & Heinke, L. (2018) · Dalton Transactions · doi:10.1039/c8dt03310b · Cited by 34
Self-citationStassen, I., Burtch, N. C., Talin, A. A., Falcaro, P., Allendorf, M. D., & Ameloot, R. (2017) · Chemical Society Reviews · doi:10.1039/c7cs90048a · Cited by 34
Deshmukh, S., Bromberg, L. E., Smith, K. A., & Hatton, T. A. (2009) · Langmuir · doi:10.1021/la804063x · Cited by 25
Wang, Z., Weidler, P. G., Azucena, C., Heinke, L., & Wöll, C. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.10.016 · Cited by 22
Self-citationMechanism of Thermal Isomerization of Azobenzene in Zeolite Cavities
Kuriyama, Y., & Oishi, S. (1999) · Chemistry Letters · doi:10.1246/cl.1999.1045 · Cited by 20
Montañez, L. M., Müller, K., Heinke, L., & Osten, H. J. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.02.018 · Cited by 18
Self-citationMulti‐Component Uptake of Dye Molecules by Films of Nanoporous Metal–Organic Frameworks
Saghanejhadtehrani, M., Schneider, E. K., & Heinke, L. (2017) · ChemPhysChem · doi:10.1002/cphc.201701023 · Cited by 11
Self-citation
Research works printed but not linked: 3
- Ninclaus C., 1998, C. R. Acad. Sci., Ser. IIc: Chim., 1, 551
- Zybaylo O., 2013, Phys. Chem. Chem. Phys., 15, 21099
- Kanj A. B., 2017, Macromol. Rapid Commun., 38, 1700239
Cited by
Chiral Metal–Organic Frameworks
Gong, W., Chen, Z., Dong, J., Liu, Y., & Cui, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00740 · Cited by 579
Adsorptive removal of dyes from wastewater using a metal-organic framework: A review
Uddin, M. J., Ampiaw, R. E., & Lee, W. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131314 · Cited by 451
Metal–Organic Framework Films and Their Potential Applications in Environmental Pollution Control
Ma, X., Chai, Y., Li, P., & Wang, B. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00113 · Cited by 438
Tackling orientation of metal-organic frameworks (MOFs): The quest to enhance MOF performance
Khalil, I. E., Fonseca, J., Reithofer, M. R., Eder, T., & Chin, J. M. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2023.215043 · Cited by 396
Li, Z., Wang, G., Ye, Y., Li, B., Li, H., & Chen, B. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201910467 · Cited by 333
Metadata
- Authors
- Heinke, L., & Wöll, C.
- Affiliations
- Karlsruhe Institute of Technology (DE)
- Corresponding author
- Heinke, Lars
- Wöll, Christof
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-01-30
- Volume
- 31
- Issue
- 26
- Pages
- e1806324-e1806324
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2913295980
- Cited by
- 192
- References
- 89
- Citations by year
- 2026: 12 · 2025: 15 · 2024: 19 · 2023: 29 · 2022: 34 · 2021: 33 · 2020: 32 · 2019: 18
- FWCI
- 1.48
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Advanced Materials (publishedVersion, cc-by-nc)
- PubMed (publishedVersion)
- Funders
- Deutsche Forschungsgemeinschaft (HE 7036/5, SFB 1176)
- Topics
- Physical Sciences › Chemistry › Inorganic Chemistry › Metal-Organic Frameworks: Synthesis and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Covalent Organic Framework Applications
- Physical Sciences › Chemistry › Organic Chemistry › Supramolecular Chemistry and Complexes
- Keywords
- SURMOF, layer-by-layer assembly, photoactive molecules, exciton transport, photon upconversion, defect density, organic semiconductors, ionic conductors
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.