The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Progress and Perspectives of Thin Film Kesterite Photovoltaic Technology: A Critical Review
Open accessAbstract
The latest progress and future perspectives of thin film photovoltaic kesterite technology are reviewed herein. Kesterite is currently the most promising emerging fully inorganic thin film photovoltaic technology based on critical raw‐material‐free and sustainable solutions. The positioning of kesterites in the frame of the emerging inorganic solar cells is first addressed, and the recent history of this family of materials briefly described. A review of the fast progress achieved earlier this decade is presented, toward the relative slowdown in the recent years partly explained by the large open‐circuit voltage (VOC) deficit recurrently observed even in the best solar cell devices in the literature. Then, through a comparison with the close cousin Cu(In,Ga)Se 2 technology, doping and alloying strategies are proposed as critical for enhancing the conversion efficiency of kesterite. In the second section herein, intrinsic and extrinsic doping, as well as alloying strategies are reviewed, presenting the most relevant and recent results, and proposing possible pathways for future implementation. In the last section, a review on technological applications of kesterite is presented, going beyond conventional photovoltaic devices, and demonstrating their suitability as potential candidates in advanced tandem concepts, photocatalysis, thermoelectric, gas sensing, etc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% Efficiency
Wang, W., Winkler, M. T., Gunawan, O., Gokmen, T., Todorov, T. K., Zhu, Y., & Mitzi, D. B. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301465 · Cited by 3,183
Weyl Semimetals as Hydrogen Evolution Catalysts
Rajamathi, C. R., Gupta, U., Kumar, N., Yang, H., Sun, Y., Süß, V., Shekhar, C., Schmidt, M., Blumtritt, H., Werner, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606202 · Cited by 1,358
Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells
Chirilă, A., Reinhard, P., Pianezzi, F., Bloesch, P., Uhl, A. R., Fella, C., Kranz, L., Keller, D., Gretener, C., Hagendorfer, H., et al. (2013) · Nature Materials · doi:10.1038/nmat3789 · Cited by 1,285
Materials Availability Expands the Opportunity for Large-Scale Photovoltaics Deployment
Wadia, C., Alivisatos, A. P., & Kammen, D. M. (2009) · Environmental Science & Technology · doi:10.1021/es8019534 · Cited by 1,156
High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber
Todorov, T. K., Reuter, K. B., & Mitzi, D. B. (2010) · Advanced Materials · doi:10.1002/adma.200904155 · Cited by 1,132
A review of thin film solar cell technologies and challenges
Lee, T. D., & Ebong, A. U. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.028 · Cited by 1,091
Yan, C., Huang, J., Sun, K., Johnston, S., Zhang, Y., Sun, H., Pu, A., He, M., Liu, F., Eder, K., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0206-0 · Cited by 861
Intrinsic point defects and complexes in the quaternary kesterite semiconductorCu2ZnSnS4
Chen, S., Yang, J.-H., Gong, X. G., Walsh, A., & Wei, S.-H. (2010) · Physical Review B · doi:10.1103/physrevb.81.245204 · Cited by 740
Solar cell efficiency tables (version 52)
Green, M. A., Hishikawa, Y., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., & Ho‐Baillie, A. W. Y. (2018) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3040 · Cited by 710
Overcoming Efficiency Limitations of SnS‐Based Solar Cells
Sinsermsuksakul, P., Sun, L., Lee, S. W., Park, H. H., Kim, S. B., Yang, C., & Gordon, R. G. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400496 · Cited by 621
Iron disulfide for solar energy conversion
Ennaoui, A., Fiechter, S., Pettenkofer, C., Alonso-Vante, N., Büker, K., Bronold, M., Höpfner, C., & Tributsch, H. (1993) · Solar Energy Materials and Solar Cells · doi:10.1016/0927-0248(93)90095-k · Cited by 580
Sustainability of photovoltaics: The case for thin-film solar cells
Fthenakis, V. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.05.001 · Cited by 443
Yuan, Z., Chen, S., Xiang, H., Gong, X., Walsh, A., Park, J., Repins, I., & Wei, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502272 · Cited by 370
Jiang, F., Gunawan, Harada, T., Kuang, Y., Minegishi, T., Domen, K., & Ikeda, S. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09015 · Cited by 289
Fan, F.-J., Wu, L., & Yu, S.-H. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41437j · Cited by 278
Gershon, T., Lee, Y. S., Antunez, P. D., Mankad, R., Singh, S., Bishop, D. M., Gunawan, O., Hopstaken, M., & Haight, R. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502468 · Cited by 278
Materials availability for large-scale thin-film photovoltaics
Andersson, B. A. (2000) · Progress in Photovoltaics: Research and Applications · doi:10.1002/(sici)1099-159x(200001/02)8:1<61::aid-pip301>3.0.co;2-6 · Cited by 264
Materials availability for large‐scale thin‐film photovoltaics
Andersson, B. A. (2000) · Progress in Photovoltaics: Research and Applications · doi:10.1002/(sici)1099-159x(200001/02)8:1<61::aid-pip301>3.3.co;2-y · Cited by 234
Kësterite thin films for photovoltaics : a review
Delbos, S. (2012) · EPJ Photovoltaics · doi:10.1051/epjpv/2012008 · Cited by 210
Perovskite-kesterite monolithic tandem solar cells with high open-circuit voltage
Todorov, T., Gershon, T., Gunawan, O., Sturdevant, C., & Guha, S. (2014) · Applied Physics Letters · doi:10.1063/1.4899275 · Cited by 209
Polycrystalline Zn3P2 Schottky barrier solar cells
Bhushan, M., & Catalano, A. (1981) · Applied Physics Letters · doi:10.1063/1.92124 · Cited by 173
Todorov, T. K., Singh, S., Bishop, D. M., Gunawan, O., Lee, Y. S., Gershon, T. S., Brew, K. W., Antunez, P. D., & Haight, R. (2017) · Nature Communications · doi:10.1038/s41467-017-00582-9 · Cited by 168
Zuser, A., & Rechberger, H. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.09.004 · Cited by 137
Properties of ZnO/CdS/CuInSe2solar cells with improved performance
AbuShama, J. A. M., Johnston, S. W., Moriarty, T. E., Teeter, G. R., Ramanathan, K., & Noufi, R. N. (2004) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.537 · Cited by 128
Understanding the Effects of Cd and Ag Doping in Cu2ZnSnS4 Solar Cells
Gautam, G. S., Senftle, T. P., & Carter, E. A. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00677 · Cited by 107
Alkali doping strategies for flexible and light-weight Cu 2 ZnSnSe 4 solar cells
López‐Mariño, S., Sánchez, Y., Espíndola-Rodríguez, M., Alcobé, X., Xie, H., Neuschitzer, M., Becerril‐Romero, I., Giraldo, S., Dimitrievska, M., Placidi, M., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09640e · Cited by 106
Self-citationFrom kesterite to stannite photovoltaics: Stability and band gaps of the Cu2(Zn,Fe)SnS4 alloy
Shibuya, T., Goto, Y., Kamihara, Y., Matoba, M., Yasuoka, K., Burton, L. A., & Walsh, A. (2014) · Applied Physics Letters · doi:10.1063/1.4862030 · Cited by 89
Reducing the interfacial defect density of CZTSSe solar cells by Mn substitution
Lie, S., Tan, J. M. R., Li, W., Leow, S. W., Tay, Y. F., Bishop, D. M., Gunawan, O., & Wong, L. H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta09668b · Cited by 85
Thin-film polycrystalline Cu2S/Cd1−xZnx S solar cells of 10% efficiency
Hall, R. B., Birkmire, R. W., Phillips, J. E., & Meakin, J. D. (1981) · Applied Physics Letters · doi:10.1063/1.92184 · Cited by 84
Fast switching response of Na-doped CZTS photodetector from visible to NIR range
Singh, O. P., Sharma, A., Gour, K. S., Husale, S., & Singh, V. N. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.04.058 · Cited by 84
Photovoltaic effect in earth abundant solution processed Cu2MnSnS4 and Cu2MnSn(S,Se)4 thin films
Prabhakar, R. R., Su, Z., Xin, Z., Baikie, T., Leow, S. W., Shukla, S., Batabyal, S. K., Gunawan, O., & Wong, L. H. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.07.006 · Cited by 83
Enhanced photoresponse of Cu2ZnSn(S, Se)4 based photodetector in visible range
Gour, K. S., Singh, O. P., Bhattacharyya, B., Parmar, R., Husale, S., Senguttuvan, T. D., & Singh, V. N. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.299 · Cited by 67
Nanostructured Cu2ZnSnS4 (CZTS) thin film for self-powered broadband photodetection
Gour, K. S., Bhattacharyya, B., Singh, O. P., Yadav, A., Husale, S., & Singh, V. N. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.079 · Cited by 58
Annihilation of structural defects in chalcogenide absorber films for high-efficiency solar cells
Mainz, R., Simsek Sanli, E., Stange, H., Azulay, D., Brunken, S., Greiner, D., Hajaj, S., Heinemann, M. D., Kaufmann, C. A., Klaus, M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00402d · Cited by 45
Gunder, R., Marquez, J. A., Gurieva, G., Unold, T., & Schorr, S. (2018) · CrystEngComm · doi:10.1039/c7ce02090b · Cited by 40
Cited by
Next-generation applications for integrated perovskite solar cells
Bati, A. S. R., Zhong, Y. L., Burn, P. L., Nazeeruddin, M. K., Shaw, P. E., & Batmunkh, M. (2023) · Communications Materials · doi:10.1038/s43246-022-00325-4 · Cited by 492
Metadata
- Authors
- Giraldo, S., Jehl, Z., Placidi, M., Izquierdo‐Roca, V., Pérez‐Rodríguez, A., & Saucedo, E.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-02-14
- Volume
- 31
- Issue
- 16
- Pages
- e1806692-e1806692
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2912812344
- Cited by
- 464
- References
- 36
- FWCI
- 23.53
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.