The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Advances in Polyimide‐Based Materials for Space Applications
Abstract
The space environment raises many challenges for new materials development and ground characterization. These environmental hazards in space include solar radiation, energetic particles, vacuum, micrometeoroids and debris, and space plasma. In low Earth orbits, there is also a significant concentration of highly reactive atomic oxygen (AO). This Progress Report focuses on the development of space‐durable polyimide (PI)‐based materials and nanocomposites and their testing under simulated space environment. Commercial PIs suffer from AO‐induced erosion and surface electric charging. Modified PIs and PI‐based nanocomposites are developed and tested to resist degradation in space. The durability of PIs in AO is successfully increased by addition of polyhedral oligomeric silsesquioxane. Conductive materials are prepared based on composites of PI and either carbon nanotube (CNT) sheets or 3D‐graphene structures. 3D PI structures, which can expand PI space applications, made by either additive manufacturing (AM) or thermoforming, are presented. The selection of AM‐processable engineering polymers in general, and PIs in particular, is relatively limited. Here, innovative preliminary results of a PI‐based material processed by the PolyJet technology are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials and Mechanics for Stretchable Electronics
Rogers, J. A., Someya, T., & Huang, Y. (2010) · Science · doi:10.1126/science.1182383 · Cited by 5,042
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P.-C., Siddiqui, N. A., Marom, G., & Kim, J.-K. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,414
An ultra-lightweight design for imperceptible plastic electronics
Kaltenbrunner, M., Sekitani, T., Reeder, J., Yokota, T., Kuribara, K., Tokuhara, T., Drack, M., Schwödiauer, R., Graz, I., Bauer-Gogonea, S., et al. (2013) · Nature · doi:10.1038/nature12314 · Cited by 2,485
Hecht, D. S., Hu, L., & Irvin, G. (2011) · Advanced Materials · doi:10.1002/adma.201003188 · Cited by 2,229
Advanced polyimide materials: Syntheses, physical properties and applications
Liaw, D.-J., Wang, K.-L., Huang, Y.-C., Lee, K.-R., Lai, J.-Y., & Ha, C.-S. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.02.005 · Cited by 2,187
The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Tang, L.-C., Wan, Y.-J., Yan, D., Pei, Y.-B., Zhao, L., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.050 · Cited by 1,169
Preparation of Novel 3D Graphene Networks for Supercapacitor Applications
Cao, X., Shi, Y., Shi, W., Lu, G., Huang, X., Yan, Q., Zhang, Q., & Zhang, H. (2011) · Small · doi:10.1002/smll.201100990 · Cited by 1,060
Qin, Y., Peng, Q., Ding, Y., Lin, Z., Wang, C., Li, Y., Xu, F., Li, J., Yuan, Y., He, X., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02781 · Cited by 775
Dispersion of single wall carbon nanotubes by in situ polymerization under sonication
Park, C., Ounaies, Z., Watson, K. A., Crooks, R. E., Smith, J., Lowther, S. E., Connell, J. W., Siochi, E. J., Harrison, J. S., & Clair, T. L. S. (2002) · Chemical Physics Letters · doi:10.1016/s0009-2614(02)01326-x · Cited by 752
Overview on Additive Manufacturing Technologies
Calignano, F., Manfredi, D., Ambrosio, E. P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L., & Fino, P. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2016.2625098 · Cited by 640
Polyimides: Synthesis, Characterization, and Applications. Volume 1
(1984) · Springer eBooks · doi:10.1007/978-1-4615-7637-2 · Cited by 490
Thermal Conduction in Aligned Carbon Nanotube–Polymer Nanocomposites With High Packing Density
Marconnet, A. M., Yamamoto, N., Panzer, M. A., Wardle, B. L., & Goodson, K. E. (2011) · ACS Nano · doi:10.1021/nn200847u · Cited by 474
The present status and key problems of carbon nanotube based polymer composites
Du, J.-H., Bai, J., & Cheng, H.-M. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.39 · Cited by 441
Space environment effects on polymers in low earth orbit
Grossman, E., & Gouzman, I. (2003) · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms · doi:10.1016/s0168-583x(03)00640-2 · Cited by 428
Self-citationEncyclopedia of Aerospace Engineering
(2010) · Wiley eBooks · doi:10.1002/9780470686652 · Cited by 396
Pettes, M. T., Ji, H., Ruoff, R. S., & Shi, L. (2012) · Nano Letters · doi:10.1021/nl300662q · Cited by 351
Jia, J., Sun, X., Lin, X., Shen, X., Mai, Y.-W., & Kim, J.-K. (2014) · ACS Nano · doi:10.1021/nn500590g · Cited by 332
Effect of low earth orbit atomic oxygen on spacecraft materials
Reddy, M. R. (1995) · Journal of Materials Science · doi:10.1007/bf00354389 · Cited by 331
Jiang, X., Bin, Y., & Matsuo, M. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.127 · Cited by 323
Aligned Carbon Nanotube−Polymer Hybrid Architectures for Diverse Flexible Electronic Applications
Jung, Y. J., Kar, S., Talapatra, S., Soldano, C., Viswanathan, G., Li, X., Yao, Z., Ou, F. S., Avadhanula, A., Vajtai, R., et al. (2006) · Nano Letters · doi:10.1021/nl052238x · Cited by 316
Wang, W., Guo, S., Penchev, M., Ruiz, I., Bozhilov, K. N., Yan, D. M., Ozkan, M., & Ozkan, C. S. (2012) · Nano Energy · doi:10.1016/j.nanoen.2012.10.001 · Cited by 267
Dai, W., Yu, J., Wang, Y., Song, Y., Alam, F. E., Nishimura, K., Lin, C.-T., & Jiang, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06417h · Cited by 203
Hegde, M., Meenakshisundaram, V., Chartrain, N., Sekhar, S., Tafti, D., Williams, C. B., & Long, T. E. (2017) · Advanced Materials · doi:10.1002/adma.201701240 · Cited by 196
A hierarchically structured graphene foam and its potential as a large-scale strain-gauge sensor
Kuang, J., Liu, L., Gao, Y., Zhou, D., Chen, Z., Han, B., & Zhang, Z. (2013) · Nanoscale · doi:10.1039/c3nr03379a · Cited by 185
Lei, X. F., Chen, Y., Zhang, H. P., Li, X. J., Yao, P., & Zhang, Q. Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402957s · Cited by 167
Chemical Dynamics in Extreme Environments
Dressler, R. A. (2001) · Advanced Series in Physical Chemistry · doi:10.1142/4308 · Cited by 160
Azadmanjiri, J., Srivastava, V. K., Kumar, P., Nikzad, M., Wang, J., & Yu, A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08748a · Cited by 151
All-carbon-nanotube flexible multi-electrode array for neuronal recording and stimulation
David‐Pur, M., Bareket, L., Beit-Yaakov, G., Raz-Prag, D., & Hanein, Y. (2013) · Biomedical Microdevices · doi:10.1007/s10544-013-9804-6 · Cited by 150
Protecting Polymers in Space with Atomic Layer Deposition Coatings
Minton, T. K., Wu, B., Zhang, J., Lindholm, N. F., Abdulagatov, A. I., O’Patchen, J., George, S. M., & Groner, M. D. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100217m · Cited by 143
Shape memory polymers with high and low temperature resistant properties
Xiao, X., Kong, D., Qiu, X., Zhang, W., Liu, Y., Zhang, S., Zhang, F., Hu, Y., & Leng, J. (2015) · Scientific Reports · doi:10.1038/srep14137 · Cited by 136
DYNAMICS OF ATOMIC-OXYGEN-INDUCED POLYMER DEGRADATION IN LOW EARTH ORBIT
Minton, T. K., & Garton, D. J. (2001) · Advanced series in physical chemistry · doi:10.1142/9789812811882_0009 · Cited by 122
Shape Memory Composites for Self-deployable Structures in Aerospace Applications
Santo, L., Quadrini, F., Accettura, A., & Villadei, W. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.11.124 · Cited by 112
High Performance Polymers - Polyimides Based - From Chemistry to Applications
Abadie, M. J. M. (2012) · InTech eBooks · doi:10.5772/2834 · Cited by 112
Polymer design for high temperature shape memory: Low crosslink density polyimides
Koerner, H., Strong, R. J., Smith, M. L., Wang, D. H., Tan, L., Lee, K. M., White, T. J., & Vaia, R. A. (2012) · Polymer · doi:10.1016/j.polymer.2012.11.007 · Cited by 109
Flexible hdC-G reinforced polyimide composites with high dielectric permittivity
Liao, X.-J., Wan, Y., Chen, L., Jiang, S., Wang, G., Zhang, L., & Hou, H. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.06.011 · Cited by 107
Exceptional thermal interface properties of a three-dimensional graphene foam
Zhang, X., Yeung, K. K., Gao, Z., Li, J., Sun, H., Xu, H., Zhang, K., Zhang, M., Chen, Z., Yuen, M. M. F., et al. (2013) · Carbon · doi:10.1016/j.carbon.2013.08.059 · Cited by 106
Gouzman, I., Girshevitz, O., Grossman, E., Eliaz, N., & Sukenik, C. N. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100113t · Cited by 101
Self-citationLoeblein, M., Bolker, A., Tsang, S. H., Atar, N., Uzan, C., Verker, R., Gouzman, I., Grossman, E., & Teo, E. H. T. (2015) · Small · doi:10.1002/smll.201502670 · Cited by 81
Self-citationLiquid Phase Deposition of a Space-Durable, Antistatic SnO2 Coating on Kapton
Gotlib-Vainshtein, K., Gouzman, I., Girshevitz, O., Bolker, A., Atar, N., Grossman, E., & Sukenik, C. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5072817 · Cited by 81
Self-citationDebris/Micrometeoroid Impacts and Synergistic Effects on Spacecraft Materials
Grossman, E., Gouzman, I., & Verker, R. (2010) · MRS Bulletin · doi:10.1557/mrs2010.615 · Cited by 68
Self-citationGao, H. T., Lan, X., Liu, L., Xiao, X., Liu, Y., & Leng, J. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa7bd7 · Cited by 64
Verker, R., Grossman, E., Gouzman, I., & Eliaz, N. (2006) · Polymer · doi:10.1016/j.polymer.2006.10.035 · Cited by 61
Self-citationThe effect of simulated hypervelocity space debris on polymers
Verker, R., Eliaz, N., Gouzman, I., et al. (2004) · Acta Materialia · doi:10.1016/j.actamat.2004.08.013 · Cited by 54
Self-citation3D printing of thermoplastic PI and interlayer bonding evaluation
Wu, W., Ye, W., Geng, P., Wang, Y., Li, G., Hu, X., & Zhao, J. X. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.07.020 · Cited by 48
Materials Issues in the Space Environment
Yang, J. C., & de Groh, K. K. (2010) · MRS Bulletin · doi:10.1017/s0883769400100004 · Cited by 36
Li, X., Al‐Ostaz, A., Jaradat, M., Rahmani, F., Nouranian, S., Rushing, G., Manasrah, A., Alkhateb, H., Finckenor, M., & Lichtenhan, J. D. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.05.004 · Cited by 35
Lei, X., Pan, Y., Qiao, M., Sun, W., Zhang, H., & Zhang, Q. (2014) · High Performance Polymers · doi:10.1177/0954008314528011 · Cited by 32
Effect of the POSS–Polyimide nanostructure on its mechanical and electrical properties
Verker, R., Grossman, E., & Eliaz, N. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.05.014 · Cited by 28
Self-citationHuang, Y., Tian, X., Lv, S., Yang, S., Fu, R. K. Y., Chu, P. K.-H., Leng, J., & Li, Y. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.05.124 · Cited by 22
Investigation of Properties of Nanocomposite Polyimide Samples Obtained by Fused Deposition Modeling
Polyakov, I. V., Vaganov, G., Yudin, V. E., Ivan’kova, E. M., Popova, E. N., & Elokhovskii, V. Y. (2018) · Mechanics of Composite Materials · doi:10.1007/s11029-018-9715-y · Cited by 19
Murakami, T., Ebisawa, K., Miyao, K., & Ando, S. (2014) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.27.187 · Cited by 12
Hyperthermal atomic oxygen source for near-space simulation experiments
Dodd, J. A., Baker, P. M., Hwang, E. S., Sporleder, D. P., Stearns, J. A., Chambreau, S. D., Braunstein, M., & Conforti, P. F. (2009) · Review of Scientific Instruments · doi:10.1063/1.3212676 · Cited by 7
Gao, H. T., Huang, L., Lan, X., Liu, L., Liu, Y., & Leng, J. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2259938 · Cited by 7
Novel Approach to Space-survivable Polyimides: Liquid Phase Deposition of Titania Coating on Kapton
Gouzman, I., Gershevitz, O., Grossman, E., Eliaz, N., Sukenik, C. N., & Kleiman, J. I. (2009) · AIP conference proceedings · doi:10.1063/1.3076852 · Cited by 6
Self-citation
Cited by
Liu, H., Chen, X., Zheng, Y., Zhang, D., Zhao, Y., Wang, C., Pan, C., Liu, C., & Shen, C. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008006 · Cited by 625
Recent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Chen, X., Liu, H., Zheng, Y., Zhai, Y., Liu, X., Liu, C., Mi, L., Guo, Z., & Shen, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14688 · Cited by 357
Metadata
- Authors
- Gouzman, I., Grossman, E., Verker, R., Atar, N., Bolker, A., & Eliaz, N.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-02-25
- Volume
- 31
- Issue
- 18
- Pages
- e1807738-e1807738
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2915146071
- Cited by
- 732
- References
- 55
- FWCI
- 25.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.