The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Advances and Prospects of Sulfide All‐Solid‐State Lithium Batteries via One‐to‐One Comparison with Conventional Liquid Lithium Ion Batteries
Abstract
Owing to the safety issue of lithium ion batteries (LIBs) under the harsh operating conditions of electric vehicles and mobile devices, all‐solid‐state lithium batteries (ASSLBs) that utilize inorganic solid electrolytes are regarded as a secure next‐generation battery system. Significant efforts are devoted to developing each component of ASSLBs, such as the solid electrolyte and the active materials, which have led to considerable improvements in their electrochemical properties. Among the various solid electrolytes such as sulfide, polymer, and oxide, the sulfide solid electrolyte is considered as the most promising candidate for commercialization because of its high lithium ion conductivity and mechanical properties. However, the disparity in energy and power density between the current sulfide ASSLBs and conventional LIBs is still wide, owing to a lack of understanding of the battery electrode system. Representative developments of ASSLBs in terms of the sulfide solid electrolyte, active materials, and electrode engineering are presented with emphasis on the current status of their electrochemical performances, compared to those of LIBs. As a rational method to realizing high energy sulfide ASSLBs, the requirements for the sulfide solid electrolytes and active materials are provided along through simple experimental demonstrations. Potential future research directions in the development of commercially viable sulfide ASSLBs are suggested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Zheng, H., Sun, Q., Liu, G., Song, X., & Battaglia, V. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.122 · Cited by 433
Cited by
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Zhao, F., Sun, Q., Yu, C., Zhang, S., Adair, K., Wang, S., Liu, Y., Zhao, Y., Liang, J., Wang, C., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00207 · Cited by 294
Building Better Batteries in the Solid State: A Review
Mauger, A., Julien, C. M., Paolella, A., Armand, M., & Zaghib, K. (2019) · Materials · doi:10.3390/ma12233892 · Cited by 277
Ruess, R., Schweidler, S., Hemmelmann, H., Conforto, G., Bielefeld, A., Weber, D. A., Sann, J., Elm, M. T., & Janek, J. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9a2c · Cited by 271
Zhang, J., Zheng, C., Li, L., Xia, Y., Huang, H., Gan, Y., Liang, C., He, X., Tao, X., & Zhang, W. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903311 · Cited by 257
Metadata
- Authors
- Lee, H., Oh, P., Kim, J., Cha, H., Chae, S., Lee, S., & Cho, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-05-29
- Volume
- 31
- Issue
- 29
- Pages
- e1900376-e1900376
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2947138634
- Cited by
- 182
- References
- 4
- FWCI
- 7.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.