The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Fluorinated Low‐Dimensional Ruddlesden–Popper Perovskite Solar Cells with over 17% Power Conversion Efficiency and Improved Stability
Abstract
Low‐dimensional Ruddlesden–Popper perovskites (RPPs) exhibit excellent stability in comparison with 3D perovskites; however, the relatively low power conversion efficiency (PCE) limits their future application. In this work, a new fluorine‐substituted phenylethlammonium (PEA) cation is developed as a spacer to fabricate quasi‐2D (4FPEA)2(MA)4 Pb 5 I 16 (n = 5) perovskite solar cells. The champion device exhibits a remarkable PCE of 17.3% with a Jsc of 19.00 mA cm−2, a Voc of 1.16 V, and a fill factor (FF) of 79%, which are among the best results for low‐dimensional RPP solar cells (n ≤ 5). The enhanced device performance can be attributed as follows: first, the strong dipole field induced by the 4‐fluoro‐phenethylammonium (4FPEA) organic spacer facilitates charge dissociation. Second, fluorinated RPP crystals preferentially grow along the vertical direction, and form a phase distribution with the increasing n number from bottom to the top surface, resulting in efficient charge transport. Third, 4FPEA‐based RPP films exhibit higher film crystallinity, enlarged grain size, and reduced trap‐state density. Lastly, the unsealed fluorinated RPP devices demonstrate superior humidity and thermal stability. Therefore, the fluorination of the long‐chain organic cations provides a feasible approach for simultaneously improving the efficiency and stability of low‐dimensional RPP solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
Zhao, W., Li, S., Yao, H., Zhang, S., Zhang, Y., Yang, B., & Hou, J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02677 · Cited by 2,790
Self-citation2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Perovskite light-emitting diodes based on spontaneously formed submicrometre-scale structures
Cao, Y., Wang, N., Tian, H., Guo, J., Wei, Y., Chen, H., Miao, Y., Zou, W., Pan, K., He, Y., et al. (2018) · Nature · doi:10.1038/s41586-018-0576-2 · Cited by 1,976
Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
Ligand-Stabilized Reduced-Dimensionality Perovskites
Quan, L. N., Yuan, M., Comin, R., Voznyy, O., Beauregard, E. M., Hoogland, S., Buin, A., Kirmani, A. R., Zhao, K., Amassian, A., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11740 · Cited by 1,436
Li, N., Tao, S., Chen, Y., Niu, X., Onwudinanti, C. K., Hu, C., Qiu, Z., Xu, Z., Zheng, G., Wang, L., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0382-6 · Cited by 1,167
Self-citationKim, H.-S., & Park, N.-G. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501392m · Cited by 1,065
Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
Dai, S., Zhao, F., Zhang, Q., Lau, T.-K., Li, T., Liu, K., Ling, Q., Wang, C., Lu, X., You, W., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12755 · Cited by 864
Stable high efficiency two-dimensional perovskite solar cells via cesium doping
Zhang, X., Ren, X., Liu, B., Munir, R., Zhu, X., Yang, D., Li, J., Liu, Y., Smilgies, D.-M., Li, R., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01145h · Cited by 678
Halogenated Materials as Organic Semiconductors
Tang, M. L., & Bao, Z. (2011) · Chemistry of Materials · doi:10.1021/cm102182x · Cited by 625
Tailoring the Energy Landscape in Quasi-2D Halide Perovskites Enables Efficient Green-Light Emission
Quan, L. N., Zhao, Y., García de Arquer, F. P., Sabatini, R., Walters, G., Voznyy, O., Comin, R., Li, Y., Fan, J. Z., Tan, H., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00976 · Cited by 510
Ahn, J., Lee, E., Tan, J., Yang, W., Kim, B., & Moon, J. (2017) · Materials Horizons · doi:10.1039/c7mh00197e · Cited by 485
Lai, H., Kan, B., Liu, T., Zheng, N., Xie, Z., Zhou, T., Wan, X., Zhang, X., Liu, Y., & Chen, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04604 · Cited by 477
Zhang, X., Wu, G., Fu, W., Qin, M., Yang, W., Yan, J., Zhang, Z., Lu, X., & Chen, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702498 · Cited by 390
Mitzi, D. B., Dimitrakopoulos, C. D., & Kosbar, L. L. (2001) · Chemistry of Materials · doi:10.1021/cm010105g · Cited by 384
Chen, Y., Sun, Y., Peng, J., Zhang, W., Su, X., Zheng, K., Pullerits, T., & Liang, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700162 · Cited by 358
Soe, C. M. M., Nie, W., Stoumpos, C. C., Tsai, H., Blancon, J., Liu, F., Even, J., Marks, T. J., Mohite, A. D., & Kanatzidis, M. G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201700979 · Cited by 341
Hu, J., Oswald, I. W. H., Stuard, S. J., Nahid, M. M., Zhou, N., Williams, O. F., Guo, Z., Yan, L., Hu, H., Chen, Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08980-x · Cited by 308
Aligned and Graded Type‐II Ruddlesden–Popper Perovskite Films for Efficient Solar Cells
Qing, J., Liu, X., Li, M., Liu, F., Yuan, Z., Tiukalova, E., Yan, Z., Duchamp, M., Chen, S., Wang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800185 · Cited by 300
Unveiling the operation mechanism of layered perovskite solar cells
Lin, Y., Fang, Y., Zhao, J., Shao, Y., Stuard, S. J., Nahid, M. M., Ade, H., Wang, Q., Shield, J. E., Zhou, N., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08958-9 · Cited by 298
Bi, D., Gao, P., Scopelliti, R., Oveisi, E., Luo, J., Grätzel, M., Hagfeldt, A., & Nazeeruddin, M. K. (2016) · Advanced Materials · doi:10.1002/adma.201505255 · Cited by 285
Luo, J., Xia, J., Yang, H., Chen, L., Wan, Z., Han, F., Malik, H. A., Zhu, X., & Jia, C. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00036k · Cited by 271
Cheng, B., Li, T.-Y., Maity, P., Wei, P.-C., Nordlund, D., Ho, K.-T., Lien, D.-H., Lin, C.-H., Liang, R.-Z., Miao, X., et al. (2018) · Communications Physics · doi:10.1038/s42005-018-0082-8 · Cited by 207
Zhao, S., Xie, J., Cheng, G., Xiang, Y., Zhu, H., Guo, W., Wang, H., Qin, M., Lu, X., Qu, J., et al. (2018) · Small · doi:10.1002/smll.201803350 · Cited by 103
Cited by
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Self-citationReducing the impact of Auger recombination in quasi-2D perovskite light-emitting diodes
Jiang, Y., Cui, M., Li, S., Sun, C., Huang, Y., Wei, J., Zhang, L., Lv, M., Qin, C., Liu, Y., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20555-9 · Cited by 469
Ye, J., Byranvand, M. M., Martínez, C. O., Hoye, R. L. Z., Saliba, M., & Polavarapu, L. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202102360 · Cited by 389
Over 21% Efficiency Stable 2D Perovskite Solar Cells
Shao, M., Bie, T., Yang, L., Gao, Y., Jin, X., He, F., Zheng, N., Yu, Y., & Zhang, X. (2022) · Advanced Materials · doi:10.1002/adma.202107211 · Cited by 316
Self-citation
Metadata
- Authors
- Shi, J., Gao, Y., Gao, X., Zhang, Y., Zhang, J., Jing, X., & Shao, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-08-05
- Volume
- 31
- Issue
- 37
- Pages
- e1901673-e1901673
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2964689792
- Cited by
- 286
- References
- 30
- FWCI
- 12.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.